ASTM D 387 : 2000 : R2017
Current
The latest, up-to-date edition.
Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023)
Hardcopy , PDF
English
03-24-2017
CONTAINED IN VOL. 06.01, 2017 Describes color and strength of a pigment under test with a reference standard of the same type and grade.
Committee |
D 01
|
DocumentType |
Test Method
|
Pages |
5
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
SupersededBy | |
Supersedes |
1.1This test method is intended to be used to compare the color and strength of a pigment under test with a reference standard of the same type and grade.
1.2This test method does not apply to white pigments.
Note 1:Test Method D3022 is similar to this test method, but it utilizes a miniature sandmill rather than a mechanical muller, to disperse the chromatic pigment.
Note 2:Test Method D332 and Test Method D2745 are similar to this test method, but they are intended for use with white pigments, rather than chromatic pigments.
1.3The values stated in SI units are the preferred unit of measurement. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 8.
ASTM D 85 : 2005 : R2023 | Standard Specification for Ochre Pigment |
ASTM D 1844 : 1986 : R2020 | Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate |
ASTM D 210 : 2005 : R2023 | Standard Specification for Bone Black Pigment |
ASTM D 2218 : 1967 : R2019 | Standard Specification for Molybdate Orange Pigments |
ASTM D 763 : 2006 : R2019 | Standard Specification for Raw and Burnt Umber Pigments |
ASTM D 6336 : 2011 : R2021 | Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer |
ASTM D 2066 : 2007 : R2020 | Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions |
ASTM D 1649 : 2001(R2019) | Standard Specification for Strontium Chromate Pigment |
ASTM D 1845 : 1986 : R2020 | Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment |
ASTM D 4302 : 2014 : R2021 | Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints |
ASTM D 769 : 2001 : R2019 | Standard Specification for Black Synthetic Iron Oxide |
ASTM D 3721 : 2005 : R2019 | Standard Specification for Synthetic Red Iron Oxide Pigment |
ASTM D 5098 : 2016 : R2021 | Standard Specification for Artists' Acrylic Dispersion Paints |
ASTM D 209 : 1981 : R2023 | Standard Specification for Lampblack Pigment |
ASTM D 3724 : 2001(R2019) | Standard Specification for Synthetic Brown Iron Oxide Pigment |
ASTM D 211 : 1967 : R2023 | Standard Specification for Chrome Yellow and Chrome Orange Pigments |
ASTM D 765 : 1987 : R2020 | Standard Specification for Raw and Burnt Sienna Pigments |
ASTM D 561 : 1982 : R2020 | Standard Specification for Carbon Black Pigment for Paint |
ASTM D 478 : 2002 : R2019 | Standard Specification for Zinc Yellow (Zinc Chromate) Pigments |
ASTM D 3021 : 2001 : R2019 | Standard Specification for Phthalocyanine Green Pigments |
ASTM D 2745 : 1993 | Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2745 : 2000 : R2008 | Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
ASTM D 2745 : 2000 : R2017 | Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
ASTM D 3964 : 2010 : R2015 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4838 : 1988 : R2010 | Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints |
ASTM D 3964 : 2010 : R2020 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
ASTM D 2244 : 2023 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 1729 : 2016 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 3964 : 2004 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM E 284 : 2022 | Standard Terminology of Appearance |
ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4838 : 1988 : R1998 | Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints |
ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
ASTM D 3964 : 2010 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 4838 : 1988 : R2003 | Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints |
ASTM D 3964 : 1980 : R1998 | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
ASTM D 1729 : 1996 : R2009 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
ASTM D 4838 : 1988 : R2016 | Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints (Withdrawn 2023) |
ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 3022 : 1984 : R1996 : EDT 1 | Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill |
ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 1729 : 1996 : R2003 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
ASTM D 2745 : 2000 | Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements |
ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 1729 : 1996 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
ASTM D 1729 : 2022 | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
ASTM E 284 : 2017 | Standard Terminology of Appearance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.