ASTM D 3682 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
Available format(s)
Hardcopy , PDF
Superseded date
01-21-2022
Superseded by
Language(s)
English
Published date
11-04-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
5.1 A compositional analysis of the ash in coal is often useful in the total description of the quality of the coal.
| Committee |
D 05
|
| DocumentType |
Test Method
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the analysis of the commonly determined major and minor elements in combustion residues from coal utilization processes.
Note 1—Test Method D5016 shall be used for determination of sulfur.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 7348 : 2021 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 1857/D1857M : 2018 | Standard Test Method for Fusibility of Coal and Coke Ash |
| ASTM D 3174 : 2012 : R2018 : EDT 1 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 5759 : 2012 : R2020 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM D 5759 : 2012 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM D 5016 : 2016 | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 7348 : 2013 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 5217 : 2017 | Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials |
| ASTM D 6700 : 2019 | Standard Guide for Use of Scrap Tires as Tire-Derived Fuel |
| ASTM D 3173 : 2003 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke |
| ASTM D 5016 : 1998 | Standard Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 3173 : 2003 : R2008 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke |
| ASTM D 3174 : 2004 : R2010 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 3180 : 2015 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM D 7582 : 2012 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 7582 : 2009 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 2013 : 2000 : REV A : EDT 1 | Standard Practice of Preparing Coal Samples for Analysis |
| ASTM D 5016 : 2008 : EDT 1 | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 2013 : 2000 : REV A | Standard Practice of Preparing Coal Samples for Analysis |
| ASTM D 3174 : 2002 : EDT 1 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 3173 : 2000 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke |
| ASTM D 3174 : 2011 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 2013 : 2000 | Standard Practice of Preparing Coal Samples for Analysis |
| ASTM D 7348 : 2007 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 7582 : 2010 : EDT 1 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 3174 : 2000 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 7582 : 2015 | Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis |
| ASTM D 7348 : 2008 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 5016 : 2003 | Standard Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 3180 : 2007 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM D 3174 : 2012 : R2018 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 3174 : 2004 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 7348 : 2008 : EDT 1 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 3173 : 2011 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 7348 : 2013 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 7348 : 2021 | Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
| ASTM D 3180 : 1989 : R1997 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM D 5016 : 2007 : REV A | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 5016 : 2007 | Standard Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 2013 : 2003 | Standard Practice of Preparing Coal Samples for Analysis |
| ASTM D 121 : 2000 : EDT 1 | Standard Terminology of Coal and Coke |
| ASTM D 3180 : 2012 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM D 3174 : 2012 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 2013 : 2004 | Standard Practice of Preparing Coal Samples for Analysis |
| ASTM D 3174 : 2002 | Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
| ASTM D 5016 : 2008 | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 2013 : 2001 | Standard Practice of Preparing Coal Samples for Analysis |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 121 : 2001 | Standard Terminology of Coal and Coke |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 2013 : 1972 | Standard Method Of Preparing Coal Samples For Analysis |
| ASTM D 2013 : 2007 | Standard Practice for Preparing Coal Samples for Analysis |
| ASTM D 3180 : 1989 : R2002 | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM D 3173 : 2002 | Standard Test Method for Moisture in the Analysis Sample of Coal and Coke |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 5016 : 2016 | Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption |
| ASTM D 3173 : 1973 | Standard Test Method for Moisture In The Analysis Sample Of Coal And Coke |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.