ASTM D 3568 : 2003 : R2018
Current
Current
The latest, up-to-date edition.
Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
08-01-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 09.01, 2015 Defines the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of ethylene propylene diene rubbers (EPDM).
| Committee |
D 11
|
| DocumentType |
Test Method
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
1.1These test methods specify the standard materials, test formulas, mixing procedures, and test methods for the evaluation and production control of ethylene propylene diene rubbers (EPDM).
1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| 14/30255646 DC : 0 | BS ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE |
| BS ISO 4097:2014 | Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure |
| ISO 4097:2014 | Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure |
| 06/30150431 DC : DRAFT MAY 2006 | ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE |
| ASTM D 6047 : 2017 : R2021 | Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers |
| ASTM D 3900 : 2017 : R2021 | Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 6047 : 2017 | Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers |
| ASTM D 3900 : 2017 | Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 3900 : 2017 : REDLINE | Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 6047 : 2017 : REDLINE | Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers |
| ASTM D 1646 : 2000 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 2161 : 2005 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 3182 : 2015 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2161 : 2019 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 2084 : 1995 | Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 1646 : 2004 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 2084 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 3900 : 2017 : REDLINE | Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 2501 : 1991 : R2000 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 2161 : 2010 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 3900 : 2005 : REV A | Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 3896 : 2007 : R2021 | Standard Practice for Rubber From Synthetic Sources—Sampling |
| ASTM D 1646 : 1981 | Standard Test Method for Rubber - Viscosity And Vulcanization Characteristics ( Mooney Viscometer) |
| ASTM D 5289 : 2006 | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
| ASTM D 6204 : 2004 | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 2161 : 1982 | Standard Method for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 3182 : 2007 : R2012 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2501 : 2014-07 | TEST METHOD FOR CALCULATION OF VISCOSITY-GRAVITY CONSTANT (VGC) OF PETROLEUM OILS |
| ASTM D 4483 : 1999 | Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries |
| ASTM D 4483 : 2020 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 2084 : 2006 | Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 5289 : 2007 | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
| ASTM D 5289 : 2017 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 2161 : 2010 : EDT 1 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 5289 : 2007 : REV A | Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters |
| ASTM D 4483 : 2005 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 3900 : 2017 | Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 3182 : 1989 : R2006 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1646 : 2019 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1646 : 2019 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 5289 : 2019 : REV A | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 3900 : 2015 | Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 5289 : 2019 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 2084 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER |
| ASTM D 3900 : 1995 : R2000 | Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers) |
| ASTM D 2084 : 2011 : R2016 | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 3182 : 1989 : R2001 : EDT 1 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 412 : 2016 : EDT 1 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 3900 : 2005 | Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 3896 : 2007 : R2011 | Standard Practice for Rubber From Synthetic Sources—Sampling |
| ASTM D 1646 : 2003 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3896 : 1985 : R2001 | Standard Practice for Rubber From Synthetic Sources-Sampling |
| ASTM D 2501 : 2011 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 1646 : 2015 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 6204 : 2019 : REV A | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 2084 : 2007 | Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 1646 : 2003 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 5289 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS |
| ASTM D 3896 : 2007 : R2016 | Standard Practice for Rubber From Synthetic Sources—Sampling |
| ASTM D 2501 : 1991 : R2005 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 2084 : 2001 | Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 5289 : 1995 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 5289 : 2012 | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
| ASTM D 6204 : 2019 | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 2501 : 2014 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 3900 : 2017 : R2021 | Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 3182 : 2007 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 3900 : 1995 : R2004 : EDT 1 | Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1646 : 2006 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 2084 : 2019 : REV A | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 6204 : 2001 | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 1646 : 2007 : R2012 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3896 : 2007 | Standard Practice for Rubber From Synthetic Sources—Sampling |
| ASTM D 6204 : 2005 | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 4483 : 2005 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 2161 : 2020 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 2161 : 1993 : R1999 : EDT 2 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 6204 : 2007 | Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 1646 : 2007 | Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 1646 : 2017 | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 3900 : 2005 : REV A : R2010 | Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
| ASTM D 3182 : 1989 : R2001 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2084 : 2011 | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 4483 : 2014 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 4483 : 2014 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 2161 : 2010 : R2016 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 2161 : 1966 | Standard Method Of Test For Conversion Of Kinematic Viscosity To Saybolt Universal Viscosity Or To Saybolt Furol Viscosity |
| ASTM D 3182 : 2021 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 6204 : 2012 | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 4483 : 2018 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2005 : REV A : R2011 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 3182 : 1989 : R1994 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1646 : 1992 | Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer) |
| ASTM D 4483 : 2014-02 | PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
| ASTM D 3182 : 2016 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2161 : 2004 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 3896 : 1985 : R1995 : EDT 1 | Standard Practice for Rubber From Synthetic Sources-Sampling |
| ASTM D 2501 : 2014 : R2019 | Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils |
| ASTM D 3182 : 2021 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2161 : 2017 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 6204 : 1999 | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 2161 : 2005 : EDT 1 | Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity |
| ASTM D 2084 : 2017 | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 3182 : 2015 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 6204 : 2015 | Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.