ASTM D 3230 : 2019
Current
The latest, up-to-date edition.
Standard Test Method for Salts in Crude Oil (Electrometric Method)
Hardcopy , PDF
English
05-21-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1.1This test method covers the determination of the approximate chloride (salts) concentration in crude oil.
| Committee |
D 02
|
| DocumentType |
Test Method
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1 This test method covers the determination of the approximate chloride (salts) concentration in crude oil. The range of concentration covered is 3.5 mg/kg to 500 mg/kg or 1.0 lb/1000 bbl to 150 lb/1000 bbl (PTB) as chloride concentration/volume of crude oil.
1.2This test method measures conductivity in the crude oil due to the presence of common chlorides, such as sodium, calcium, and magnesium. Other conductive materials may also be present in the crude oil.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3.1Exception—Acceptable concentration units are g/m3 or PTB (lb/1000 bbl).
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 7.3, 7.4, and 7.11.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 4057 : 2012 : R2018 | Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
| ASTM D 7455 : 2019 | Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis |
| ASTM D 7578 : 2018 | Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants |
| ASTM D 8056 : 2018 | Standard Guide for Elemental Analysis of Crude Oil |
| ASTM D 4928 : 2000 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 5002 : 2016 | Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 5002 : 2015 | Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
| ASTM D 5002 : 2018 : EDT 1 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer |
| ASTM D 4928 : 2000 : EDT 1 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 5002 : 1999 : R2010 | Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
| ASTM D 5002 : 2013 | Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 5002 : 2019 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer |
| ASTM D 4928 : 2000 : R2010 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 4928 : 2000 : R2005 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 381 : 2019 | Standard Test Method for Gum Content in Fuels by Jet Evaporation |
| ASTM D 4928 : 2011 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 381 : 2022 | Standard Test Method for Gum Content in Fuels by Jet Evaporation |
| ASTM D 4928 : 2012 : R2018 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 381 : 2012 : R2017 | Standard Test Method for Gum Content in Fuels by Jet Evaporation |
| ASTM D 5002 : 1999 : R2005 | Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
| ASTM D 5002 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 4928 : 2012 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration |
| ASTM D 5002 : 2022 | Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 5002 : 1999 | Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.