• Shopping Cart
    There are no items in your cart

ASTM D 256 : 2015-10

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

TEST METHODS FOR DETERMINING THE IZOD PENDULUM IMPACT RESISTANCE OF PLASTICS

Superseded date

10-18-2015

Published date

10-01-2015

Sorry this product is not available in your region.

CONTAINED IN VOL. 08.01, 2015 Describes the determination of the resistance of plastics to 'standardized' pendulum-type hammers, mounted in 'standardized' machines, in breaking standard specimens with one pendulum swing.

Committee
D 20
DocumentType
Redline
PublisherName
American Society for Testing and Materials
Status
Superseded

Standards Relationship
UNE 53189-6:1974 Identical

ASTM F 648 : 2014 : REDLINE Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
MIL-C-47224 Revision B:1993 COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT
ASTM D 5140 : 1995 Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004)
AWS G1.1M/G1.1 : 2006 GUIDE TO ULTRASONIC ASSEMBLY OF THERMOPLASTICS
ASTM D 4549 : 2015 : REDLINE Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D 3013 : 2013 : REDLINE Standard Specification for Epoxy Molding Compounds
CSA A440 : 2017 NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS
CSA NGV 5.1 : 2016 RESIDENTIAL FUELING APPLIANCES
ASTM F 636 : 1985 : R1991 Guide for Selection of Tests for Material Properties of Transfer Molding Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)
ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
ASTM D 3965 : 2016 : REDLINE Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
ASTM D 6713 : 2014 : REDLINE Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
SAE AMS3617F : 2014 POLYAMIDE TYPE 6-6, PLASTIC MOLDINGS AND EXTRUSIONS
SAE AMS3732B Potting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE
BS 3531-8:1982 Surgical implants Specification for ceramic materials based on alumina
ASTM E 2136 : 2004 : R2013 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022)
AWWA M55 : 1 PE PIPE - DESIGN AND INSTALLATION
ISO 20126:2012 Dentistry Manual toothbrushes General requirements and test methods
AWWA F101 : 2013 CONTACT-MOLDED, FIBERGLASS-REINFORCED PLASTIC WASH-WATER TROUGHS AND LAUNDERS
SAE AMS3870E Ceramic Moldings and Extrusions Dense, Ultra-High Alumina (99% Al2O3)
SAE AMS3628E Plastic Extrusions and Moldings, Polycarbonate General Purpose
MIL-C-46866 Base Document:1973 COMPOUND, EPOXY MOLDING AND APPLICATION OF
DOD-STD-35-24 Revision A:1978 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, BEARINGS
ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
MIL-M-87176 Base Document:1982 MOLDING MATERIAL, POLYPROPYLENE, MODIFIED MECHANICAL USE ONLY
MIL-P-46185 Base Document:1983 PLASTIC MOLDING & EXTRUSION MATERIALS, POLYETHERSULFONE
MIL-P-46131 Revision B:1975 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED, GLASS FIBER REINFORCED
MIL-P-83668 Revision A:1976 PLASTIC BOARD (FOR PACKAGING APPLICATIONS)
MIL-O-71039 Base Document:1992 OBTURATING BAND, PLASTIC SPLIT
MIL B 17901 : B BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED
API TR 17TR1 : 2003 EVALUATION STANDARD FOR INTERNAL PRESSURE SHEATH POLYMERS FOR HIGH TEMPERATURE FLEXIBLE PIPES
MIL-DTL-52543 Revision E:2010 LIGHT, MARKER, GROUND-OBSTRUCTION
MIL-P-46120 Revision B:1983 PLASTIC MOLDING AND EXTRUSION MATERIAL POLYSULFONE
MIL-F-10336 Revision E:1977 FIBER SHEET, VULCANIZED
MIL-I-24768 Base Document:1992 INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR
MIL-R-45036 Revision D:1978 RUBBER, HARD,(EBONITE) NATURAL OR SYNTHETIC, SHEET, STRIP, ROD, TUBING AND MOLDED PARTS
MIL-M-24325 Base Document:1968 MOLDING MATERIAL PLASTIC, EPOXY COMPOUNDS THERMOSETTING
MIL-P-46129 Revision A:1975 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED
H-B-00681 Revision D:1968 BRUSHES, TYPEWRITER
UU B 001254 : NOTICE 1 BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER
MIL-P-25374 Revision B:1985 PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED
MIL C 47027 : 0 COMPOUND, MOLDING, PLASTIC, RIGID, THERMOPLASTIC
GGG-T-001310 Base Document:1967 TAPE, FISH, STEEL
MIL-DTL-24191 Revision D:1996 PLASTIC SHEET, CELL OR CONTINUOUS CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING)
MIL-I-26525 Revision F:1988 INDICATOR, VOLTAGE, BATTERY GENERATOR 28 VOLT DC (NOMINAL)
MIL-B-24781 Base Document:1993 BATTERBOARD SYSTEMS, SYNTHETIC
FC 3-260-18F : 2015 UNIFIED FACILITIES CRITERIA - AIR FORCE AIRCRAFT ARRESTING SYSTEMS (AAS) INSTALLATION, OPERATION, AND MAINTENANCE (IO&M;)
L-C-530 Revision C:1987 COATING, PIPE, THERMOPLASTIC RESIN
L-H-490 Revision B:1992 HOLDER, CARD-LABEL, (PLASTIC)
MIL-I-16923 Revision H:1991 INSULATING COMPOUND, ELECTRICAL, EMBEDDING, EPOXY
MIL-M-19417 Revision D:1992 Mask Assemblies, Oxygen and Smoke, Full Face
MIL-DTL-17901 Revision C:2005 Bearing Components, Bonded Synthetic Rubber, Water Lubricated
MIL-P-43043 Revision C:1978 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
MIL-B-3889 Revision B:1968 BOX, PLASTIC, COMPARTMENTED, SMALL PARTS
MIL-O-71130 Base Document:1992 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
AA-R-200 Revision F:1987 REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH
MIL O 70548 : 0 OBURATING BAND, PLASTIC SPLIT (MOLDED)
MIL-C-24449 Revision A:1981 CAST POLYMETHYL METHACRYLATE FOR SHEET STOCK, CUSTOM CASTINGS AND FINISHED WINDOWS
A-A-59001 Revision A:2012 BATTERBOARD, SYNTHETIC
L-P-1183 Revision B:1977 PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID
MIL-P-46122 Revision B:1975 PLASTIC MOLDING MATERIAL AND PLASTIC EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE POLYMER AND COPOLYMER
MIL-M-24519 Revision E:1992 MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC
L-P-1041 Revision A:1973 PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER
MIL-R-45906 Revision D:1984 RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK
MIL-DTL-20268 Revision H:2017 FRAME, CAP
MIL P 46169 : A PLASTIC, SHEET MOLDING COMPOUND, POLYESTER, GLASS FIBER REINFORCED (FOR GENERAL PURPOSE APPLICATIONS)
MIL-P-46179 Revision A:1986 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE
MIL P 24191 : D PLASTIC SHEET, CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING)
L-P-398 Revision B:1973 PLASTIC MOLDING MATERIAL STYRENE-BUTADIENE
MIL-S-36390 Base Document:1965 SHIELD, HEAT DISTILLING FLASK, COMPRESSED ASBESTOS AND CEMENT
L-P-504 Revision E:1991 PLASTIC SHEET AND FILM, CELLULOSE ACETATE
MIL-M-14 Revision H:1990 MOLDING COMPOUNDS, THERMOSETTING
MIL-P-46161 Revision A:1976 PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS FIBER REINFORCED
MIL-P-997 Revision D:1966 PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN
MIL-P-46115 Revision B:1977 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE
A-A-58078 Base Document:1996 PLASTIC BOARD (FOR PACKAGING APPLICATIONS)
MIL-R-21931 Revision A:1977 RESIN, EPOXY
I.S. EN ISO 20126:2012 DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012)
ASTM D 6394 : 2014 : REDLINE Standard Specification for Sulfone Plastics (SP)
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
ASTM F 2881/F2881M : 2018 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
CSA C22.2 No. 0.17 : 2000 : R2004 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
CSA B481 SERIES : 2012 GREASE INTERCEPTORS
CSA C22.2 No. 2515:2009 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
CSA C22.2 No. 2515 : 2009 : INC : UPD 1 : 2012 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
CSA C22.2 No. 2515 : 2009 : INC : UPD 2 : 2014 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
ASTM D 3998 : 1981 Test Method for Pendulum-Impace Resistance of Extrusion Plastometer Extrudates (Withdrawn 1989)
ASTM D 3489 : 2017 : REDLINE Standard Test Methods for Microcellular Urethane Materials
(INACTIVE RECORD)ASTM D 5336 : 2015-04 CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS
ASTM D 3222 : 2005 : R2015 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
IEEE 1680.3-2012 IEEE Standard for Environmental Assessment of Televisions
IEEE 1680.2-2012 IEEE Standard for Environmental Assessment of Imaging Equipment
IEEE 1133-1988 IEEE Application Guide for Evaluating Nonceramic Materials for High-Voltage Outdoor Applications
DIN EN ISO 20126:2012-06 DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012)
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
ASTM PS 2 : 1994 Specification for Molding Plastics, Electrical, Thermoplastic (Withdrawn 1997)
ASTM F 968 : 1993 : R2002 : EDT 1 Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers (Withdrawn 2008)
ASTM D 7293 : 2012 : REDLINE Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
ASTM D 706 : 2015 : REDLINE Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
ASTM D 6100 : 2017 : REDLINE Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
ASTM D 705 : 1999 : R2012 Standard Specification for Urea-Formaldehyde Molding Compounds
BS 7253-2:1990 Non-metallic materials for surgical implants Specification for ceramic materials based on alumina
ASTM D 707 : 2015 : REDLINE Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
ASTM D 704 : 1999 Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM D 6262 : 2017 : REDLINE Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
ANSI C37.57 : 1990 SWITCHGEAR - METAL-ENCLOSED INTERRUPTER SWITCHGEAR ASSEMBLIES - CONFORMANCE TESTING
ASTM F 561 : 2013 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM F 790 : 2008 : R2013 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM D 705 : 1999 Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM D 6339 : 2011 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ASTM F 2881 : 2011 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM C 1355/C1355M : 1996 : R2001 Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM D 5948 : 2005 : R2012 Standard Specification for Molding Compounds, Thermosetting
ASTM C 1349 : 2017 : REDLINE Standard Specification for Architectural Flat Glass Clad Polycarbonate
ASTM D 4203 : 2017 : REDLINE Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
ASTM D 5204 : 2017 : REDLINE CLASSIFICATION SYSTEM FOR POLYAMIDE-IMIDE (PAI) MOLDING AND EXTRUSION MATERIALS
ASTM C 470/C470M : 2015 : REDLINE Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
ASTM F 3219 : 2017 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
ASTM G 178 : 2016 : REDLINE Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ANSI C37.55 : 1989 MEDIUM VOLTAGE METAL-CLAD ASSEMBLIES - CONFORMANCE TEST PROCEDURES
ASTM D 705 : 1999 : R2004 Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM C 1355/C1355M : 1996 : R2011 Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM C 1355/C1355M : 1996 Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM C 1355/C1355M : 1996 : R2015 Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM D 5948 : 2005 : EDT 1 Standard Specification for Molding Compounds, Thermosetting
NACE RP 03 04 : 2004 DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES
AASHTO M 330 : 2013 SPECIFICATION FOR POLYPROPYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
ASTM D 6098 : 2016 : REDLINE Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
ASTM D 7745 : 2011 Standard Practice for Testing Pultruded Composites
ASTM D 704 : 1999 : R2012 Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM F 2026 : 2017 : REDLINE Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM C 1355/C1355M : 1996 : R2006 Standard Specification for Glass Fiber Reinforced Gypsum Composites
ASTM D 787 : 2012-08 SPECIFICATION FOR ETHYL CELLULOSE MOLDING AND EXTRUSION COMPOUNDS
ASTM D 5948 : 2005 Standard Specification for Molding Compounds, Thermosetting
ASTM D 4673 : 2016 : REDLINE Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
ASTM F 2881 : 2011 : R2015 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 5138 : 2016 : REDLINE Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
ASTM D 6395 : 2011 : REDLINE Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
ASTM D 704 : 1999 : R2004 Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM F 790 : 2008 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
CSA C22.2 No. 0.17 : 2000 : R2013 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
CSA C22.2 No. 0.17 : 2000 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ASTM D 1636 : 2013 : REDLINE Standard Specification for Allyl Molding Compounds
ASTM D 1784 : 2011 : REDLINE Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ISO 19213:2017 Implants for surgery — Test methods of material for use as a cortical bone model
ASTM D 4225 : 2003 Standard Specification for Styrene-Butadiene Sheeting (Withdrawn 2009)
ASTM D 5941 : 1996 Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998)
ASTM E 1420 : 1991 Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996)
ASTM D 1562 : 2015 : REDLINE Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)
ASTM D 8033 : 2016 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
ASTM D 1822M : 1993 Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials (Withdrawn 1996)
ASTM D 5676 : 1999 Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004)
ASTM F 1876 : 1998 : R2003 : EDT 1 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications (Withdrawn 2012)
L-P-535 Revision E:1979 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
ASTM D 4634 : 2016 : REDLINE Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
ASTM D 4617 : 2003 Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012)
ASTM F 1579 : 2002 : EDT 1 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications (Withdrawn 2011)
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ASTM D 6263 : 2015 : REDLINE Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
ASTM F 1579 : 2002 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
ASTM D 1788 : 1981 Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics (Withdrawn 1988)
ASTM F 968 : 1993 : R1998 Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers
ASTM D 1039 : 2016 : REDLINE Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
ASTM D 6261 : 2014 : REDLINE Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
ASTM F 1876 : 1998 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
ASTM D 5476 : 1999 Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)
BS ISO 19213:2017 Implants for surgery. Test methods of material for use as a cortical bone model
ASTM F 968 : 1993 : R2002 Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers
ASTM D 4396 : 2015 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
ASTM D 5990 : 2000 Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007)
ASTM D 1897 : 1988 Recommended Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials (Withdrawn 1992)
ASTM D 5593 : 1999 : EDT 1 Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)
ASTM D 4349 : 2016 : REDLINE Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
ASTM D 729 : 1995 Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000)
ASTM D 5942 : 1996 Test Method for Determination of Charpy Impact Strength (Withdrawn 1998)
SAE AMS3650D Rods, Sheets, and Molded Shapes, Polychlorotrifluoroethylene (PCTFE) Unplasticized
MIL-R-47025 Revision A:1991 RESIN, CASTING, FIRE RETARDANT, EPOXY BASE
ASTM F 2820 : 2012 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM D 2852 : 2016 : REDLINE Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
CSA B481 SERIES : 2012 : R2017 GREASE INTERCEPTORS
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
CSA C22.2 No. 2515 : 2009 : R2014 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
CSA C22.2 No. 211.2 : 2006 RIGID PVC (UNPLASTICIZED) CONDUIT
ASTM F 635 : 1985 : R1991 Guide for Selection of Tests for Material Properties of Liquid Thermoset Encapsulating Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)
ASTM F 988 : 1986 Guide for Specifying Carbon-Fiber Randomly Reinforced Ultra-High-Molecular-Weight Polyethylene for Medical Devices (Withdrawn 1992)
ASTM D 3222 : 2005 : R2010 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM D 3222 : 2005 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
NSF 52 : 2017 SUPPLEMENTAL FLOORING
NSF 426 : 2017 ENVIRONMENTAL LEADERSHIP AND CORPORATE SOCIAL RESPONSIBILITY ASSESSMENT OF SERVERS
ASTM D 619 : 2014 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D 731 : 2010-07 TEST METHOD FOR MOLDING INDEX OF THERMOSETTING MOLDING POWDER
ANSI Z80.6 : 1983 PHYSICOCHEMICAL PROPERTIES OF CONVENTIONAL HARD PLASTIC CONTACT LENSES,
ASTM D 1201 : 2013 : REDLINE Standard Specification for Thermosetting Polyester Molding Compounds
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ASTM D 3641 : 2015 : REDLINE Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
A-A-52508 Revision A:1996 INDICATOR, VOLTAGE: BATTERY-GENERATOR, 28 VOLT DC (NOMINAL) (METRIC)
ASTM F 2759 : 2011 : REDLINE Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
ANSI/CSA NGV 5.1-2016 (R2020) Residential fueling appliances
CSA C22.2 No. 211.3 : 1996(R2007) REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
ASTM D 4067 : 2016 : REDLINE Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM F 712 : 2006 : R2011 Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
ASTM F 712 : 2006 Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers
ASTM D 4812 : 2011 : REDLINE Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
ASTM D 1822 : 2013 : REDLINE Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials
IEEE 1680.1-2009 IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays
BS EN ISO 20126 : 2012 DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012)
SAE ARP5943 Snowplows and Hitches
SAE ARP6059 Solid De-Icing/Anti-Icing Material Spreader for Airport Application
ASTM E 2136 : 2004 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability
ASTM D 3935 : 2015 : REDLINE Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
SAE J1875_200105 Materials for Plastic Check Valves for Vacuum Booster Systems
SAE AMS3731C Potting Compound, Epoxy Bisphenol A-Type
CSA/ANSI NGV 5.2-2017 Vehicle fueling appliances (VFA)
ASME A112.19.8 : 2007 SUCTION FITTINGS FOR USE IN SWIMMING POOLS, WADING POOLS, SPAS, AND HOT TUBS
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ASME PVHO 1 : 2016 SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY

ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
ASTM D 3641 : 2015 : REDLINE Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ISO 180:2000 Plastics Determination of Izod impact strength
ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.