ASTM D 1799 : 2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Carbon Black—Sampling Packaged Shipments
English
11-01-2020
07-09-2025
| Committee |
D 24
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers the sampling of packaged carbon blacks for shipment in bags, cartons, flexible intermediate bulk containers (FIBC), or other non-bulk packages.
Note 1:The tests to be made on the samples obtained by this practice shall be determined by the producer and the consumer. The specific details of each test method are described in appropriate ASTM methods used for testing carbon black.
1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1512 : 2023 | Standard Test Methods for Carbon Black—pH Value |
| ASTM D 1900 : 2020 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 1511 : 2012 : R2023 | Standard Test Method for Carbon Black—Pellet Size Distribution |
| ASTM D 7854 : 2021 | Standard Test Method for Carbon Black-Void Volume at Mean Pressure |
| ASTM D 3053 : 2023 : REV A | Standard Terminology Relating to Carbon Black |
| ASTM D 5230 : 2021 : EDT 1 | Standard Test Method for Carbon Black—Automated Individual Pellet Hardness |
| ASTM D 1619 : 2022 | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 8474 : 2023 | Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA) |
| ASTM D 2414 : 2023 : REV A | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
| ASTM D 1508 : 2023 : EDT 1 | Standard Test Method for Carbon Black, Pelleted Fines and Attrition |
| ASTM D 3265 : 2024 : REV A | Standard Test Method for Carbon Black—Tint Strength |
| ASTM D 8466 : 2022 | Standard Guide for Recovered Carbon Black—Carbon Black Test Methods for Testing rCB |
| ASTM D 7633 : 2013 : R2022 | Standard Test Method for Carbon Black—Carbon Content |
| ASTM D 1618 : 2023 | Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract |
| ASTM D 1506 : 2023 | Standard Test Methods for Carbon Black—Ash Content |
| ASTM D 1514 : 2023 | Standard Test Method for Carbon Black—Sieve Residue |
| ASTM D 3493 : 2021 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
| ASTM D 1937 : 2023 | Standard Test Method for Carbon Black, Pelleted—Mass Strength |
| ASTM D 6556 : 2021 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
| ASTM D 1993 : 2022 | Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption |
| ASTM D 6845 : 2022 | Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area |
| ASTM D 7724 : 2018 : R2023 : EDT 1 | Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM) |
| ASTM D 3192 : 2009 : R2019 | Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber) |
| ASTM D 1513 : 2005 : R2023 | Standard Test Method for Carbon Black, Pelleted—Pour Density |
| ASTM D 1510 : 2024 : REV B | Standard Test Method for Carbon Black—Iodine Adsorption Number |
| ASTM D 3191 : 2010 : R2020 | Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures |
| ASTM D 5817 : 1996 | Standard Practice for Carbon Black, Pelleted-Reduction and Blending of Gross Samples |
| ASTM D 1509 : 2018 : R2023 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 1509 : 2018 | Standard Test Methods for Carbon Black—Heating Loss |
| ASTM D 1509 : 2024 | Standard Test Methods for Carbon Black—Heating Loss |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.