ASTM D 1765 : 2021
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Classification System for Carbon Blacks Used in Rubber Products
Hardcopy , PDF
01-06-2023
English
05-25-2021
Committee |
D 24
|
DocumentType |
Standard
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This classification system covers the classification of rubber-grade carbon blacks by the use of a four-character nomenclature system. The first character gives some indication of the influence of the carbon black on the rate of cure of a typical rubber compound containing the black. The second character gives information on the average surface area of the carbon black. The last two characters are assigned arbitrarily.
1.2All rubber-grade carbon blacks for which a number is currently assigned at the time of publication of this classification system are listed in Table 1 together with some of their typical properties. ASTM classification numbers (“N” or “S” designation) not listed in Table 1 have either been withdrawn or are not currently assigned. The use of inactive or unassigned N or S designations is prohibited until such a time as the designation is officially reactivated or assigned by Subcommittee D24.41
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 6909 : 2010 : R2016 | Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer |
ASTM D 5817 : 2020 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
ASTM E 524 : 2008 : R2020 | Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests |
ASTM E 670 : 2009 : R2020 | Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter |
ASTM D 3493 : 2020 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 5963 : 2004 : R2019 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM E 1551 : 2016 : R2020 | Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire |
ASTM E 501 : 2008 : R2020 | Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests |
ASTM E 1136 : 2019 | Standard Specification for P195/75R14 Radial Standard Reference Test Tire |
ASTM E 1844 : 2008 : R2020 | Standard Specification for a Size 10 × 4–5 Smooth-Tread Friction Test Tire |
ASTM D 3853 : 2012 : R2017 | Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding |
ASTM D 4583 : 2021 | Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data |
ASTM D 2414 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3053 : 2020 : REV A | Standard Terminology Relating to Carbon Black |
ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
ASTM D 4821 : 2020 | Standard Guide for Carbon Black—Validation of Test Method Precision and Bias |
ASTM D 5963 : 2022 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
ASTM D 3853 : 2022 | Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding |
ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
ASTM D 2414 : 2022 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3493 : 2020 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 3493 : 2021 | Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) |
ASTM D 3053 : 2022 | Standard Terminology Relating to Carbon Black |
ASTM D 1510 : 2019 : REV A | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 2414 : 2019 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 3265 : 2019 : REV B | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 7854 : 2018 : REV C : EDT 1 | Standard Test Method for Carbon Black-Void Volume at Mean Pressure |
ASTM D 1510 : 2021 | Standard Test Method for Carbon Black—Iodine Adsorption Number |
ASTM D 3265 : 2021 | Standard Test Method for Carbon Black—Tint Strength |
ASTM D 6556 : 2019 : REV A | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 6556 : 2021 | Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption |
ASTM D 2414 : 2021 | Standard Test Method for Carbon Black—Oil Absorption Number (OAN) |
ASTM D 7854 : 2021 | Standard Test Method for Carbon Black-Void Volume at Mean Pressure |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.