ASTM D 1688 : 2017
Current
Current
The latest, up-to-date edition.
Standard Test Methods for Copper in Water
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
07-17-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.These test methods cover the determination of copper in water by atomic absorption spectrophotometry.
| Committee |
D 19
|
| DocumentType |
Test Method
|
| Pages |
10
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the determination of copper in water by atomic absorption spectrophotometry. Section 34 on Quality Control pertains to these test methods. Three test methods are included as follows:
| Test Method | Concentration | Sections |
| A—Atomic Absorption, | 0.05 to 5 mg/L | 7 – 15 |
| B—Atomic Absorption, | 50 to 500 μg/L | 16 – 24 |
| C—Atomic Absorption, | 5 to 100 μg/L | 25 – 33 |
1.2Either dissolved or total recoverable copper may be determined. Determination of dissolved copper requires filtration through a 0.45-μm (11.10) membrane filter at the time of collection. In-line membrane filtration is preferable.
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversion to inch-pound units that are provided for information only and are not considered standard.
1.4Three former photometric test methods were discontinued. Refer to Appendix X1 for historical information.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 11.3, 11.9.1, 20.10, and 22.11.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 3559 : 2015 | Standard Test Methods for Lead in Water (Withdrawn 2024) |
| ASTM D 1691 : 2017 | Standard Test Methods for Zinc in Water |
| ASTM D 3558 : 2015 | Standard Test Methods for Cobalt in Water |
| ASTM D 1971 : 2016 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
| ASTM D 858 : 2017 | Standard Test Methods for Manganese in Water |
| ASTM D 4806 : 2019 | Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM F 1581 : 2008 : R2016 | Standard Specification for Composition of Anorganic Bone for Surgical Implants |
| ASTM D 857 : 2017 | Standard Test Method for Aluminum in Water |
| ASTM D 1068 : 2015 | Standard Test Methods for Iron in Water (Withdrawn 2024) |
| ASTM D 1886 : 2014 | Standard Test Methods for Nickel in Water |
| ASTM D 3557 : 2017 | Standard Test Methods for Cadmium in Water |
| ASTM D 1687 : 2017 | Standard Test Methods for Chromium in Water |
| ASTM D 3645 : 2015 | Standard Test Methods for Beryllium in Water |
| ASTM D 1687 : 2002 | Standard Test Methods for Chromium in Water |
| ASTM D 1976 : 2002 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy |
| ASTM D 4841 : 1988 : R2008 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 1691 : 2017 | Standard Test Methods for Zinc in Water |
| ASTM D 5673 : 2005 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry |
| ASTM D 3919 : 2015 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry (Withdrawn 2024) |
| ASTM D 1691 : 1990 | Standard Test Methods for Zinc in Water |
| ASTM D 5810 : 1996 : R2021 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
| ASTM D 1691 : 1995 | Standard Test Methods for Zinc in Water |
| ASTM D 1068 : 2005 : EDT 1 | Standard Test Methods for Iron in Water |
| ASTM D 4841 : 1988 : R2018 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
| ASTM D 5847 : 1999 : REV A : EDT 1 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1687 : 1992 : R1996 | Standard Test Methods for Chromium in Water |
| ASTM D 5810 : 1996 : R2011 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 2777 : 2012 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
| ASTM D 3557 : 2002 : R2007 : EDT 1 | Standard Test Methods for Cadmium in Water |
| ASTM D 3919 : 2004 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 4841 : 1988 : R1998 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 5847 : 2002 : R2007 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 858 : 1995 | Standard Test Methods for Manganese in Water |
| ASTM D 5810 : 1996 : R2001 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 3559 : 1996 | Standard Test Methods for Lead in Water |
| ASTM D 3559 : 2008 | Standard Test Methods for Lead in Water |
| ASTM D 5673 : 2015 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 1886 : 2014 | Standard Test Methods for Nickel in Water |
| ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
| ASTM D 2777 : 2003 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
| ASTM D 2777 : 2021 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 4841 : 1988 : R2003 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 1066 : 2018 | Standard Practice for Sampling Steam |
| ASTM D 3370 : 2010 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 5673 : 2016 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 1687 : 2002 : R2007 : EDT 1 | Standard Test Methods for Chromium in Water |
| ASTM D 3558 : 2008 | Standard Test Methods for Cobalt in Water |
| ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 1066 : 2006 | Standard Practice for Sampling Steam |
| ASTM D 1976 : 2018 | Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy |
| ASTM D 4841 : 1988 : R2013 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 3557 : 2017 | Standard Test Methods for Cadmium in Water |
| ASTM D 5847 : 2002 : R2012 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1066 : 2018 : EDT 1 | Standard Practice for Sampling Steam |
| ASTM D 1976 : 1996 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy |
| ASTM D 5673 : 1996 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 2777 : 1998 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
| ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 3370 : 2008 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 3558 : 1994 : R1998 | Standard Test Methods for Cobalt in Water |
| ASTM D 1687 : 1992 | Standard Test Methods for Chromium in Water |
| ASTM D 1691 : 2012 | Standard Test Methods for Zinc in Water |
| ASTM D 5847 : 2002 : R2020 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
| ASTM D 1687 : 2017 | Standard Test Methods for Chromium in Water |
| ASTM D 1066 : 1997 : R2001 | Standard Practice for Sampling Steam |
| ASTM D 5810 : 1996 : R2006 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 1068 : 2003 | Standard Test Methods for Iron in Water |
| ASTM D 3558 : 2003 | Standard Test Methods for Cobalt in Water |
| ASTM D 1687 : 2012 | Standard Test Methods for Chromium in Water |
| ASTM D 3919 : 2008 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry |
| ASTM D 3557 : 1990 | Standard Test Methods for Cadmium in Water |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 5673 : 2003 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 3558 : 2015 | Standard Test Methods for Cobalt in Water |
| ASTM D 1066 : 2011 | Standard Practice for Sampling Steam |
| ASTM D 1976 : 2020 | Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy |
| ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
| ASTM D 5673 : 2010 | Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry |
| ASTM D 5847 : 2022 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 2777 : 2008 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 1691 : 2002 | Standard Test Methods for Zinc in Water |
| ASTM D 1691 : 2002 : R2007 : EDT 1 | Standard Test Methods for Zinc in Water |
| ASTM D 2777 : 2006 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 3559 : 2003 | Standard Test Methods for Lead in Water |
| ASTM D 3557 : 2012 | Standard Test Methods for Cadmium in Water |
| ASTM D 3557 : 2002 | Standard Test Methods for Cadmium in Water |
| ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
| ASTM D 1886 : 2008 | Standard Test Methods for Nickel in Water |
| ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
| ASTM D 1886 : 2014 : R2021 : EDT 1 | Standard Test Methods for Nickel in Water |
| ASTM D 5847 : 2002 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 1068 : 2010 | Standard Test Methods for Iron in Water |
| ASTM D 3919 : 1999 | Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry |
| ASTM D 3370 : 1976 | Standard Practices for Sampling Water |
| ASTM D 1068 : 2015 | Standard Test Methods for Iron in Water (Withdrawn 2024) |
| ASTM D 1976 : 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy |
| ASTM D 1886 : 1994 : R1998 | Standard Test Methods for Nickel in Water |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1886 : 2003 | Standard Test Methods for Nickel in Water |
| ASTM D 4841 : 1988 : R2013 : EDT 1 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 3557 : 1995 | Standard Test Methods for Cadmium in Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 5673 : 2002 | Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry |
| ASTM D 1068 : 1996 | Standard Test Methods for Iron in Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
| ASTM D 5810 : 1996 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 3370 : 2007 | Standard Practices for Sampling Water from Closed Conduits |
| ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
| ASTM D 1976 : 2019 | Standard Test Method for Elements in Water by Inductively-Coupled Plasma Atomic Emission Spectroscopy |
| ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 2777 : 2008 : EDT 1 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 3559 : 2015 | Standard Test Methods for Lead in Water (Withdrawn 2024) |
| ASTM D 5810 : 1996 : R2015 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 1976 : 2012 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy |
| ASTM D 3558 : 2015 : R2023 | Standard Test Methods for Cobalt in Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.