ASTM D 1509 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Carbon Black—Heating Loss
Hardcopy , PDF
02-13-2023
English
06-25-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 24
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the determination of the heating loss of carbon black at 125°C. This heating loss consists primarily of moisture, but other volatile materials may also be lost. These test methods are not applicable to treated carbon blacks that contain added volatile materials, if moisture loss is to be measured.
1.2These test methods may also be used for the determination of the heating loss of recovered carbon fillers (rCF/rCB) at 125°C. However, these materials were not included in the precision studies and therefore, the precision statements contained in this standard may not be valid for these materials.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 1619 : 2016 : REV A | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 8268 : 2019 | Standard Practice for Rubber Compounding Materials—Evaluation of Recycled Vulcanizate Particulate Rubber |
| ASTM E 1868 : 2010 : R2015 | Standard Test Methods for Loss-On-Drying by Thermogravimetry |
| ASTM D 8178 : 2018 | Standard Terminology Relating to Recovered Carbon Black (rCB) |
| ASTM D 5603 : 2019 : REV A | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber |
| ASTM D 8043 : 2016 | Standard Guide for Carbon Black—Shelf Life |
| ASTM D 1799 : 2003 : REV A : R2014 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 4122 : 2017 : EDT 1 | Standard Practice for Carbon Black—Evaluation of an Industry Reference Black |
| ASTM D 5817 : 2003 : REV A : R2014 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
| ASTM D 4139 : 2004 : R2014 | Standard Guide for Determining Volatile and Nonvolatile Content of Pigments |
| ASTM D 561 : 1982 : R2014 | Standard Specification for Carbon Black Pigment for Paint |
| ASTM D 1900 : 2020 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 1619 : 2022 | Standard Test Methods for Carbon Black—Sulfur Content |
| ASTM D 1799 : 2020 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 3053 : 2022 | Standard Terminology Relating to Carbon Black |
| ASTM D 5817 : 2020 | Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing |
| ASTM D 8466 : 2022 | Standard Guide for Recovered Carbon Black—Carbon Black Test Methods for Testing rCB |
| ASTM D 8043 : 2020 | Standard Guide for Carbon Black—Shelf Life |
| ASTM E 1868 : 2010 : R2021 | Standard Test Methods for Loss-On-Drying by Thermogravimetry |
| ASTM D 561 : 1982 : R2020 | Standard Specification for Carbon Black Pigment for Paint |
| ASTM D 4139 : 2004 : R2020 | Standard Guide for Determining Volatile and Nonvolatile Content of Pigments |
| ASTM D 1900 : 2006 : R2015 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 1900 : 1994 : R1998 | Standard Practice for Carbon Black-Sampling Bulk Shipments |
| ASTM D 1799 : 1993 : R1997 | Standard Practice for Carbon Black-Sampling Packaged Shipments |
| ASTM D 1799 : 2019 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 4483 : 1999 | Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries |
| ASTM D 4483 : 2020 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2005 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 1799 : 2003 : REV A | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1799 : 2003 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1900 : 2006 | Standard Practice for Carbon Black-Sampling Bulk Shipments |
| ASTM D 1799 : 2003 : REV A : R2008 | Standard Practice for Carbon Black<span class='unicode'>—</span>Sampling Packaged Shipments |
| ASTM D 1799 : 2002 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
| ASTM D 1900 : 1994 : R2002 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 1900 : 2019 | Standard Practice for Carbon Black—Sampling Bulk Shipments |
| ASTM D 4483 : 2005 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2014 : REV A | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2014 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2018 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 4483 : 2005 : REV A : R2011 | Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries |
| ASTM D 1900 : 2006 : R2011 | Standard Practice for Carbon Black<char: emdash>Sampling Bulk Shipments |
| ASTM D 1799 : 2003 : REV A : R2014 | Standard Practice for Carbon Black—Sampling Packaged Shipments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.