ASTM D 150 : 2022
Current
Current
The latest, up-to-date edition.
Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
10-18-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 09
|
| DocumentType |
Test Method
|
| Pages |
20
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the determination of relative permittivity, dissipation factor, loss index, power factor, phase angle, and loss angle of specimens of solid electrical insulating materials when the standards used are lumped impedances. The frequency range addressed extends from less than 1 Hz to several hundred megahertz.
Note 1:In common usage, the word relative is frequently dropped.
1.2These test methods provide general information on a variety of electrodes, apparatus, and measurement techniques. A reader interested in issues associated with a specific material needs to consult ASTM standards or other documents directly applicable to the material to be tested.2,3
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 10.2.1.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6585 : 2017 : R2022 | Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D 6411/D6411M : 1999 : R2020 | Standard Specification for Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM D 7193 : 2017 : R2022 | Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D 2413 : 2016 : R2022 | Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric |
| ASTM D 1039 : 2016 : R2022 | Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation |
| ASTM D 1082 : 2017 | Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica |
| ASTM D 8065/D8065M : 2016 | Standard Classification System and Basis for Specification for Specifying Plastic Films |
| ASTM D 1430 : 2022 | Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
| ASTM D 1304 : 1999 : R2020 : EDT 1 | Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation |
| ASTM D 4325 : 2020 | Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes |
| ASTM D 3013 : 2013 : R2021 | Standard Specification for Epoxy Molding Compounds |
| ASTM F 2468 : 2005 : R2019 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 2442 : 1975 : R2020 | Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
| ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 4101 : 2017 : EDT 1 | Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
| ASTM D 470 : 2021 | Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
| ASTM D 3307 : 2021 | Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
| ASTM D 3159 : 2022 | Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
| ASTM D 3032 : 2021 : REV A | Standard Test Methods for Hookup Wire Insulation |
| ASTM D 4732 : 2013 : R2020 | Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 4731 : 2013 : R2020 | Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable |
| ASTM D 3222 : 2021 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
| ASTM D 2647 : 2018 | Standard Specification for Crosslinkable Ethylene Plastics |
| ASTM D 229 : 2019 : EDT 1 | Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
| ASTM F 790 : 2018 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| ASTM D 2633 : 2021 | Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable |
| ASTM D 5948 : 2005 : R2020 | Standard Specification for Molding Compounds, Thermosetting |
| ASTM D 3382 : 2022 | Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques |
| ASTM F 602 : 2009 : R2015 | Standard Criteria for Implantable Thermoset Epoxy Plastics (Withdrawn 2024) |
| ASTM D 4000 : 2020 | Standard Classification System for Specifying Plastic Materials |
| ASTM D 4566 : 2020 | Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 1636 : 2021 | Standard Specification for Allyl Molding Compounds |
| ASTM D 8195 : 2018 | Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting |
| ASTM F 665 : 2009 : R2015 | Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application |
| ASTM D 7472 : 2019 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
| ASTM D 2305 : 2018 | Standard Test Methods for Polymeric Films Used for Electrical Insulation |
| ASTM F 105 : 1972(R2019) | Standard Specification for Type 58 Borosilicate Sealing Glass |
| ASTM D 6343 : 2014 : R2018 | Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications |
| ASTM F 624 : 2009 : R2015 : EDT 1 | Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications |
| ASTM D 3275 : 2018 | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
| ASTM D 202 : 2017 | Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation |
| ASTM G 21 : 2015 : R2021 : EDT 1 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM D 4308 : 2021 | Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter |
| ASTM D 1676 : 2017 | Standard Test Methods for Film-Insulated Magnet Wire |
| ASTM D 4066 : 2013 : R2019 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| ASTM D 2116 : 2016 : R2021 | Standard Specification for FEP Resin Molding and Extrusion Materials |
| ASTM D 3380 : 2022 | Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates |
| ASTM D 5204 : 2019 | Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials |
| ASTM D 257 : 2014 : R2021 : EDT 1 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D 924 : 2015 | Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids |
| ASTM D 6040 : 2018 | Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
| ASTM D 4733 : 2017 | Standard Test Methods for Solventless Electrical Insulating Varnishes |
| ASTM D 1248 : 2016 | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| ASTM D 2520 : 2021 | Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 °C |
| ASTM D 4872 : 2014 : R2020 | Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds |
| ASTM D 116 : 1986 : R2020 | Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications |
| ASTM D 5575 : 2018 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| ASTM F 641 : 2009 : R2014 | Standard Specification for Implantable Epoxy Electronic Encapsulants |
| ASTM F 79 : 1969(R2019) | Standard Specification for Type 101 Sealing Glass |
| ASTM D 704 : 1999 : R2020 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
| ASTM D 2149 : 2013 : R2021 | Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 °C |
| ASTM D 5205 : 2016 | Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
| ASTM D 788 : 2016 | Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
| ASTM D 5047 : 2017 | Standard Specification for Polyethylene Terephthalate Film and Sheeting |
| ASTM D 1169 : 2019 : REV A | Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids |
| JEDEC JESD72A:2018(R2023) | Test Methods and Acceptance Procedures for the Evaluation of Polymeric Materials |
| ASTM D 1711 : 2024 : REV A | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1711 : 2024 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1711 : 2022 | Standard Terminology Relating to Electrical Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.