ASTM D 1492 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
Hardcopy , PDF
08-25-2023
English
10-03-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method covers the determination of the amount of bromine-reactive material in aromatic hydrocarbons. It is usually applied to materials having bromine indexes below 500.
| Committee |
D 16
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the amount of bromine-reactive material in aromatic hydrocarbons. It is usually applied to materials having bromine indexes below 500.
1.2This test method has been found applicable to aromatic hydrocarbons containing no more than trace amounts of olefins and that are substantially free from material lighter than isobutane and have a distillation end point under 288°C.
1.3The following applies to all specified limits in this test method: For purposes of determining conformance with this test method, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement see Section 8.
| ASTM D 7124 : 2017 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
| ASTM D 4077 : 2017 | Standard Specification for Cumene (Isopropylbenzene) |
| ASTM D 4734 : 2020 | Standard Specification for Refined Benzene-545 |
| ASTM D 4790 : 2020 : REV A | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
| ASTM D 7124 : 2019 | Standard Specification for Benzene for Use with Zeolite Based Catalysts |
| ASTM D 4734 : 2018 : REV A | Standard Specification for Refined Benzene-545 |
| ASTM D 5471 : 2018 | Standard Specification for O-Xylene 980 |
| ASTM D 1159 : 2007 : R2017 | Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration |
| ASTM D 4790 : 2014 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
| ASTM D 7125 : 2017 | Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process |
| ASTM D 5776 : 2013 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 6809 : 2002 : R2016 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 6809 : 2020 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 2710 : 2020 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration |
| ASTM D 5776 : 2014 : REV A | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 4052 : 1996 : R2002 : EDT 1 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 3437 : 1999 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3505 : 1996 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 5776 : 2021 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 5776 : 2007 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 4052 : 2009 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1159 : 1998 | Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration |
| ASTM D 3437 : 2010 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3505 : 2012 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 2710 : 2009 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 3505 : 1996 : R2006 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 4052 : 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4052 : 2016 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 6809 : 2002 : R2012 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 3505 : 2018 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023) |
| ASTM D 1159 : 2007 | Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 2710 : 2009 : R2018 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration |
| ASTM D 5776 : 2014 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 3437 : 2011 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 3437 : 2008 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3437 : 2003 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 6809 : 2002 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 1159 : 2007 : R2017 | Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration |
| ASTM D 5776 : 2007 : EDT 1 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 1491 : 1978 | Method of Test for Bromine Index of Aromatic Hydrocarbons by Potentiometric Titration (Withdrawn 1985) |
| ASTM D 5776 : 2007 : R2012 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 2710 : 2009 : R2013 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration |
| ASTM D 6809 : 2002 : R2007 | Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
| ASTM D 4052 : 2015 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1159 : 2007 : R2012 | Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration |
| ASTM D 5776 : 1999 | Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 1159 : 2001 | Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration |
| ASTM D 3505 : 1996 : R2000 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 4052 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 3505 : 2012 : EDT 1 | Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
| ASTM D 2710 : 1999 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.