ASTM D 140/D140M : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Sampling Asphalt Materials
Available format(s)
Hardcopy , PDF
Superseded date
12-23-2023
Superseded by
Language(s)
English
Published date
06-22-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.This practice applies to the sampling of asphalt materials at points of manufacture, storage, or delivery.
| Committee |
D 04
|
| DocumentType |
Standard Practice
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice applies to the sampling of asphalt materials at points of manufacture, storage, or delivery.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 8188 : 2023 | Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube) |
| ASTM D 3141/D3141M : 2021 | Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements |
| ASTM D 6373 : 2023 | Standard Specification for Performance-Graded Asphalt Binder |
| ASTM D 2027/D2027M : 2019 | Standard Specification for Cutback Asphalt (Medium-Curing Type) |
| ASTM D 449/D449M : 2003 : R2021 | Standard Specification for Asphalt Used in Dampproofing and Waterproofing |
| ASTM D 2746/D2746M : 2018 : R2023 | Standard Test Method for Staining Tendency of Asphalt (Stain Index) |
| ASTM D 4125/D4125M : 2021 | Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method |
| ASTM D 2521/D2521M : 1976 : R2021 | Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining |
| ASTM D 244 : 2023 | Standard Test Methods and Practices for Emulsified Asphalts |
| ASTM D 6152/D6152M : 2012 : R2018 | Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing |
| ASTM D 5013 : 2018 | Standard Practices for Sampling Wastes from Pipes and Other Point Discharges |
| ASTM D 6511/D6511M : 2018 | Standard Test Methods for Solvent Bearing Bituminous Compounds |
| ASTM D 3143/D3143M : 2019 | Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus |
| ASTM D 3289 : 2017 : R2022 | Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method) |
| ASTM D 5643/D5643M : 2006 : R2018 | Standard Specification for Coal Tar Roof Cement, Asbestos Free |
| ASTM D 5710/D5710M : 2022 | Standard Specification for Trinidad Lake Modified Asphalt |
| ASTM D 36/D36M : 2014 : R2020 | Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
| ASTM D 450/D450M : 2007 : R2018 | Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing |
| ASTM D 8051/D8051M : 2016 : R2023 | Standard Specification for Wax-Modified Asphalt Used in Roofing |
| ASTM D 8125 : 2018 : R2023 | Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE) |
| ASTM D 6626 : 2015 : R2021 | Standard Specification for Performance-Graded Trinidad Lake Modified Asphalt Binder |
| ASTM D 7654/D7654M : 2010 : R2018 | Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer |
| ASTM D 8239 : 2023 | Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test |
| ASTM D 3791/D3791M : 2011 : R2018 | Standard Practice for Evaluating the Effects of Heat on Asphalts |
| ASTM D 2028/D2028M : 2015 : R2021 : EDT 1 | Standard Specification for Cutback Asphalt (Rapid-Curing Type) |
| ASTM D 8237 : 2021 | Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device |
| ASTM D 6932/D6932M : 2021 | Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures |
| ASTM D 312/D312M : 2016 : REV A : R2023 | Standard Specification for Asphalt Used in Roofing |
| ASTM E 102/E102M : 1993 : R2021 | Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures |
| ASTM D 5505 : 2014 : R2020 | Standard Practice for Classifying Emulsified Recycling Agents |
| ASTM D 3320/D3320M : 2018 | Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
| ASTM D 4552/D4552M : 2020 | Standard Classification for Hot-Mix Recycling Agents |
| ASTM D 6154 : 2015 : R2021 : EDT 1 | Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 70/D70M : 2021 | Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
| ASTM D 2397/D2397M : 2020 | Standard Specification for Cationic Emulsified Asphalt |
| ASTM D 3381/D3381M : 2018 | Standard Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction |
| ASTM D 8099/D8099M : 2017 : R2023 | Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type) |
| ASTM D 4215 : 2021 | Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures |
| ASTM D 7226 : 2013 : R2023 | Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer |
| ASTM D 946/D946M : 2020 | Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction |
| ASTM D 43/D43M : 2000 : R2018 | Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing |
| ASTM D 2026/D2026M : 2015 : R2021 : EDT 1 | Standard Specification for Cutback Asphalt (Slow-Curing Type) |
| ASTM D 7379/D7379M : 2008 : R2021 | Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive |
| ASTM D 977 : 2020 | Standard Specification for Emulsified Asphalt |
| ASTM D 4989/D4989M : 1990 : REV A : R2021 | Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer |
| ASTM D 6945/D6945M : 2003 : R2023 | Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade) |
| ASTM D 6307 : 2019 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
| ASTM D 5727/D5727M : 2000 : R2023 | Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type) |
| ASTM D 6608 : 2020 | Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes |
| ASTM D 8 : 2022 : REV A | Standard Terminology Relating to Materials for Roads and Pavements |
| ASTM D 8 : 2022 | Standard Terminology Relating to Materials for Roads and Pavements |
| ASTM D 8 : 2021 | Standard Terminology Relating to Materials for Roads and Pavements |
| ASTM D 8 : 2019 | Standard Terminology Relating to Materials for Roads and Pavements |
| ASTM D 8 : 2020 : REV A | Standard Terminology Relating to Materials for Roads and Pavements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.