• There are no items in your cart

ASTM D 130 : 2019

Current

Current

The latest, up-to-date edition.

Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-01-2019

US$63.00
Excluding Tax where applicable

This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 °C.

Committee
D 02
DocumentType
Test Method
Pages
10
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 °C. (Warning—Some products, particularly natural gasoline, may have a much higher vapor pressure than would normally be characteristic of automotive or aviation gasolines. For this reason, exercise extreme caution to ensure that the pressure vessel used in this test method and containing natural gasoline or other products of high vapor pressure is not placed in the 100 °C (212 °F) bath. Samples having vapor pressures in excess of 124 kPa (18 psi) may develop sufficient pressures at 100 °C to rupture the pressure vessel. For any sample having a vapor pressure above 124 kPa (18 psi), use Test Method D1838.)

1.2The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 1.1, 7.1, and Annex A2.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6300 : 2020 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6300 : 2013 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1838 : 2016 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1655 : 2008 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2024 Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2014 : REV A : EDT 1 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4177 : 2016 : EDT 1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2011 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2012 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2006 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 396 : 2020 Standard Specification for Fuel Oils
ASTM D 6300 : 2017 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 2006 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 975 : 2022 Standard Specification for Diesel Fuel
ASTM D 1655 : 2021 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4177 : 1995 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2018 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2005 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 Standard Specification for Aviation Turbine Fuels
ASTM D 1838 : 2021 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 6300 : 2017 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 396 : 1998 Standard Specification for Fuel Oils
ASTM D 1655 : 2014 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2001 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2011 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 975 : 2019 : REV B Standard Specification for Diesel Fuel
ASTM D 1655 : 2020 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2016 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 2022 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2006 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2024 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2004 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 2022 Standard Specification for Aviation Turbine Fuels
ASTM D 975 : 2021 Standard Specification for Diesel Fuel
ASTM D 1655 : 2015 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 975 : 2023 : REV A Standard Specification for Diesel Fuel
ASTM D 1655 : 2008 Standard Specification for Aviation Turbine Fuels
ASTM D 975 : 2024 Standard Specification for Diesel Fuel
ASTM D 6300 : 2019 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 2002 Standard Specification for Aviation Turbine Fuels
ASTM D 975 : 2024 : REV A Standard Specification for Diesel Fuel
ASTM D 1655 : 2006 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2016 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2010 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2017 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1838 : 2012 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1655 : 2000 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2021 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6300 : 2019 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1838 : 2012 : REV A Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1655 : 2015 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2023 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6300 : 2020 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 975 : 2020 : REV C Standard Specification for Diesel Fuel
ASTM D 1655 : 2015 Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1838 : 2006 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 6300 : 2023 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 1655 : 2007 Standard Specification for Aviation Turbine Fuels
ASTM D 4177 : 2015 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1838 : 2007 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1655 : 2015 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2020 : REV B Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2021 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2006 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 2012 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1838 : 2003 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 6300 : 2014 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1838 : 1991 : R1996 : EDT 2 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 6300 : 2015 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 2023 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2014 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2015 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 1999 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 1985 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2016 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 4177 : 2022 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4177 : 1995 : R2010 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1838 : 2005 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1655 : 2024 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2004 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 4177 : 1995 : R2000 Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM D 1655 : 2016 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2013 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 2021 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2021 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2004 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2014 : REV C Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2016 : REV B Standard Specification for Aviation Turbine Fuels
ASTM D 975 : 2022 : REV A Standard Specification for Diesel Fuel
ASTM D 6300 : 2008 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6300 : 2003 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 396 : 2021 Standard Specification for Fuel Oils
ASTM D 1655 : 2007 : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2000 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2013 Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2007 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 396 : 2009 Standard Specification for Fuel Oils
ASTM D 1655 : 2015 : REV D : EDT 1 Standard Specification for Aviation Turbine Fuels
ASTM E 1 : 2014 : R2020 Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM D 1655 : 2019 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2006 : REV D Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2002 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 2022 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2003 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 975 : 2023 Standard Specification for Diesel Fuel
ASTM D 1838 : 1991 : R2001 : EDT 1 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1838 : 1964 : R1968 Standard Method Of Test For Copper Strip Corrosion By Liquefied Petroleum (Lp) Gases
ASTM D 1655 : 2014 Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2003 Standard Specification for Aviation Turbine Fuels
ASTM D 4177 : 2016 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2009 Standard Specification for Aviation Turbine Fuels
ASTM D 1838 : 2011 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 4177 : 2020 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4177 : 1995 : R2005 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2011 Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2016 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1655 : 2023 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2020 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1838 : 2014 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1655 : 2009 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2018 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2020 Standard Specification for Aviation Turbine Fuels
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1655 : 2018 Standard Specification for Aviation Turbine Fuels
ASTM D 396 : 2024 Standard Specification for Fuel Oils
ASTM D 4177 : 2022 : EDT 1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4177 : 2015 : REV A Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 6300 : 2014 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1838 : 2020 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
ASTM D 1655 : 2019 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 1655 : 2013 : REV A Standard Specification for Aviation Turbine Fuels
ASTM D 6300 : 2024 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.