ASTM D 1084 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Viscosity of Adhesives
Available format(s)
Hardcopy , PDF
Superseded date
04-17-2021
Superseded by
Language(s)
English
Published date
06-30-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.These test methods cover the determination of the viscosity of free-flowing adhesives.
| Committee |
D 14
|
| DocumentType |
Test Method
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the determination of the viscosity of free-flowing adhesives.
1.1.1The limitation of this test method to self-leveling adhesives eliminates thixotropic and plastic materials whose viscosity is a function of the rate of stirring and previous history of the adhesive.
1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6411/D6411M : 1999 : R2020 | Standard Specification for Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM F 2118 : 2014 : R2020 | Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials |
| ASTM D 4689 : 2012 : R2018 | Standard Specification for Adhesive, Casein-Type |
| ASTM D 4690 : 2012 : R2018 | Standard Specification for Urea-Formaldehyde Resin Adhesives |
| ASTM D 2680 : 2020 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM D 7799 : 2012 : REV A : R2021 | Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings |
| ASTM F 493 : 2020 | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| ASTM D 2564 : 2020 | Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems |
| ASTM D 1337 : 2010 : R2016 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM D 816 : 2006 : R2016 | Standard Test Methods for Rubber Cements |
| ASTM D 1874 : 2016 | Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases (Withdrawn 2021) |
| ASTM D 3122 : 2015 | Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings |
| ASTM D 2680 : 2001 : R2014 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM D 2851 : 2015 | Standard Specification for Liquid Optical Adhesive |
| ASTM D 2835 : 1989 : R2017 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM D 4800 : 1994 : R2015 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 6465 : 1999 : R2016 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM F 2468 : 2005 : R2019 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 8089 : 2017 | Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives |
| ASTM D 2235 : 2004 : R2016 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM D 7799 : 2012 : REV A | Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings |
| ASTM D 5363 : 2016 | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| ASTM D 1338 : 1999 : R2016 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| ASTM F 493 : 2014 | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| ASTM D 4317 : 2016 | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
| ASTM D 4070 : 2015 | Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures |
| ASTM D 7149 : 2005 : R2016 | Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
| ASTM D 3138 : 2004 : R2016 | Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ASTM D 6411/D6411M : 1999 : R2012 | Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM D 1545 : 2007 | Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method |
| ASTM D 1545 : 2007 : R2012 | Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method |
| ASTM D 1200 : 2010 : R2018 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| ASTM D 1601 : 1999 | Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| ASTM D 1545 : 1998 | Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method (Withdrawn 2007) |
| ASTM D 1200 : 2010 : R2014 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| ASTM D 2556 : 2014 : R2018 | Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry |
| ASTM D 1545 : 2013 | Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method |
| ASTM D 115 : 1998 | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| ASTM D 2556 : 2011 | Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties |
| ASTM D 1601 : 2018 | Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers |
| ASTM D 1200 : 1970 | Standard Method Of Test For Viscosity Of Paints, Varnishes, And Lacquers By Ford Viscosity Cup |
| ASTM D 2556 : 1993 : REV A : R2005 | Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties |
| ASTM D 1200 : 1994 : R2005 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| ASTM D 2556 : 1993 : REV A : R1997 | Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties |
| ASTM D 1200 : 1994 : R1999 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| ASTM D 1601 : 1978 | Standard Test Method for Dilute Solution Viscosity Of Ethylene Polymers |
| ASTM D 1545 : 2013 : R2017 | Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method |
| ASTM D 1601 : 2012 | Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers |
| ASTM D 1545 : 1976 : R1989 : EDT 1 | Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method |
| ASTM D 2556 : 2014 | Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.