• There are no items in your cart

ASTM C 911 : 2019

Current

Current

The latest, up-to-date edition.

Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-23-2019

US$55.00
Excluding Tax where applicable

This specification covers lime and limestone products suitable for the following chemical and industrial uses: Cooking rags Sulfite pulp Silica brick Other water treatment uses Calcium carbide Grease Calcium silicate products Hypochlorite (bleach)

Committee
C 07
DocumentType
Standard
Pages
4
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification covers lime and limestone products suitable for the following chemical and industrial uses:

Cooking rags

Sulfite pulp

Silica brick

Other water treatment uses

Calcium carbide

Grease

Calcium silicate products

Hypochlorite (bleach)

The following uses are addressed in other ASTM standards:

Use

Standard(s)

Neutralization of Waste Acid (Test Methods)

C400

Agricultural Liming Materials

C602

Soil Stabilization

C977

Asphalt

C1097

Flue Gas Desulfurization (Test Methods)

C1318

Drinking Water Softening

C1529

Waste and Wastewater Neutralization

C1529

Wastewater Treatment Plant Residuals (Biosolids) Stabilization

C1529 and D6249

1.2The type designations in Table 1 signify the following:

Limestone, high-calcium—CL

Limestone, dolomitic—DL

Limestone, magnesian—ML

Quicklime, high-calcium—CQ

Quicklime, dolomitic—DQ

Quicklime, magnesian—MQ

Hydrated lime, high-calcium—CH

Hydrated lime, dolomitic—DH

Hydrated lime, magnesian—MH

1.3The buyer shall designate the use, as listed in Table 1, and may specify one or more of the type designations in 1.1.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C 25 : 2019 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM E 1266 : 2020 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM D 5050 : 2008 : R2023 Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

ASTM D 6249 : 2006 : R2011 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
ASTM C 1097 : 2007 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
ASTM D 6249 : 1998 Standard Guide for Aklaline Stabilization of Wastewater Treatment Plant Residuals
ASTM C 25 : 2024 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM C 1097 : 1995 Standard Specification for Hydrated Lime for Use in Asphaltic-Concrete Mixtures
ASTM C 977 : 2003 : R2009 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
ASTM C 1529 : 2006 : REV A : R2011 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
ASTM C 1318 : 1995 : R2001 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
ASTM C 602 : 2023 Standard Specification for Agricultural Liming Materials
ASTM C 1318 : 2015 : REV A Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
ASTM C 110 : 2020 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C 400 : 2019 : R2024 : EDT 1 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
ASTM C 400 : 2019 : R2024 : EDT 2 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
ASTM C 1529 : 2006 : REV A Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
ASTM C 1097 : 2006 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
ASTM C 977 : 2018 : R2024 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
ASTM C 1097 : 2013 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures
ASTM C 1529 : 2002 : REV A Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
ASTM C 1529 : 2006 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
ASTM C 400 : 2019 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
ASTM C 1318 : 1995 : R2009 : EDT 1 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
ASTM C 1529 : 2002 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
ASTM C 110 : 2024 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C 25 : 2019 : EDT 1 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM C 1318 : 1995 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
ASTM C 602 : 2020 Standard Specification for Agricultural Liming Materials
ASTM D 6249 : 2019 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
ASTM C 110 : 2000 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C 1097 : 2007 : R2012 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
ASTM D 6249 : 2006 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
ASTM C 977 : 2018 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
ASTM D 6249 : 2019 : R2024 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
ASTM C 25 : 2019 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM C 1097 : 2006 : REV A Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.