ASTM C 423 : 2017 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
Available format(s)
PDF
Superseded date
03-24-2022
Superseded by
Language(s)
English
Published date
02-06-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.06, 2017 Defines the measurement of sound absorption in a reverberation room by measuring decay rate.
| Committee |
E 33
|
| DocumentType |
Redline
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the measurement of sound absorption in a reverberation room by measuring decay rate. Procedures for measuring the absorption of a room, the absorption of an object, such as an office screen, and the sound absorption coefficients of a specimen of sound absorptive material, such as acoustical ceiling tile, are described.
1.2Field Measurements—Although this test method covers laboratory measurements, the test method described in 4.1 can be used for making field measurements of the absorption of rooms (see also 5.5). A method to measure the absorption of rooms in the field is described in Test Method E2235.
1.3This test method includes information on laboratory accreditation (see Annex A1), asymmetrical screens (see Annex A2), and reverberation room qualification (see Annex A3).
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM E 597 : 1995 | Practice for Determining A Single-Number Rating of Airborne Sound Isolation for Use in Multiunit Building Specifications (Withdrawn 1999) |
| ASTM E 1042 : 2002 | Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
| ASTM E 1704 : 1995 : R2018 | Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures |
| MIL-DTL-32585 Base Document:2017 | Insulation, Thermal and Acoustic, Fibrous Glass |
| ASTM E 596 : 1996 : R2016 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| MIL-A-23054 Revision A:1982 | ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED |
| MIL-PRF-32161 Base Document:2004 | INSULATION, HIGH TEMPERATURE FIRE PROTECTION, THERMAL AND ACOUSTIC |
| ASTM E 1222 : 1990 : R2009 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| SAE J 1174 : 2015 | OPERATOR EAR SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT |
| ASTM C 842 : 2005 : R2015 | Standard Specification for Application of Interior Gypsum Plaster |
| ASTM E 1111/E1111M : 2014 : REDLINE | Standard Test Method for Measuring the Interzone Attenuation of Open Office Components |
| ASTM E 1222 : 1990 : R1996 : EDT 1 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM D 4851 : 2007 : R2015 | TEST METHODS FOR COATED AND LAMINATED FABRICS FOR ARCHITECTURAL USE |
| ASTM C 1094 : 2001 | Standard Guide for Flexible Removable Insulation Covers |
| ASTM E 795 : 2016 : REDLINE | Standard Practices for Mounting Test Specimens During Sound Absorption Tests |
| ASTM E 1264 : 2014 : REDLINE | Standard Classification for Acoustical Ceiling Products |
| ASTM C 1094 : 2001 : R2006 | Standard Guide for Flexible Removable Insulation Covers (Withdrawn 2010) |
| ASTM D 4851 : 2007 | Standard Test Methods for Coated and Laminated Fabrics for Architectural Use |
| ASTM C 844 : 2015 : REDLINE | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
| ASTM E 3091 : 2017 | Standard Specification for Systems to Measure Sound Levels |
| ANSI S12.60 : 0 | ACOUSTICAL PERFORMANCE CRITERIA, DESIGN REQUIREMENTS, AND GUIDELINES FOR SCHOOLS |
| MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
| ASTM F 2154 : 2013-05 | SPECIFICATION FOR SOUND-ABSORBING BOARD, FIBROUS GLASS, PERFORATED FIBROUS GLASS CLOTH FACED |
| SAE J 2629 : 2015 | STANDARD FORMATS FOR PRESENTING ACOUSTICAL DATA |
| BS EN ISO 21809-5:2017 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings |
| SAE J 1400 : 2017 | LABORATORY MEASUREMENT OF THE AIRBORNE SOUND BARRIER PERFORMANCE OF FLAT MATERIALS AND ASSEMBLIES |
| ASTM E 492 : 2009 : R2016 : EDT 1 | Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine |
| ASTM C 1410 : 2017 : REDLINE | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM E 1376 : 1990 : R1994 : EDT 2 | Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels |
| ASTM E 90 : 2009 : R2016 | Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
| ASTM E 1042 : 2002 : R2008 : EDT 1 | Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
| ASTM E 2235 : 2004 : EDT 1 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| ASTM D 4851 : 2007 : R2011 | Standard Test Methods for Coated and Laminated Fabrics for Architectural Use |
| ASTM E 1222 : 1990 : R2002 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM E 3133 : 2018 | Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine |
| ASTM C 384 : 2004 : R2011 | Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method |
| ASTM E 492 : 2009 | Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine |
| UFC 4-211-01 : Change 1 | UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS |
| ASTM E 1222 : 1990 : R2016 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM C 384 : 2004 : R2016 | Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method |
| CSA Z107.9 : 2000 : R2004 | STANDARD FOR CERTIFICATION OF NOISE BARRIERS |
| ASTM C 384 : 2004 | Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method |
| SAE J 1175 : 1985 | BYSTANDER SOUND LEVEL MEASUREMENT PROCEDURE FOR SMALL ENGINE POWERED EQUIPMENT |
| ASTM E 596 : 1996 : R2002 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ASTM E 1375 : 1990 : R2002 | Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers (Withdrawn 2005) |
| ASTM E 596 : 1996 : R2009 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ASTM E 596 : 1996 : R2002 : EDT 1 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ASTM E 2611 : 2017 : REDLINE | Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method |
| ASTM E 90 : 2009 | Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
| ASTM C 1482 : 2017 : REDLINE | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1685 : 2015 : REDLINE | Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications |
| ASTM E 2813 : 2012 | Standard Practice for Building Enclosure Commissioning |
| ASTM E 2813 : 2012 : EDT 1 | Standard Practice for Building Enclosure Commissioning |
| ANSI S12.60-1 : 2010 | ACOUSTICAL PERFORMANCE CRITERIA, DESIGN REQUIREMENTS, AND GUIDELINES FOR SCHOOLS - PART 1: PERMANENT SCHOOLS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| HH-I-545 Revision B:1971 | INSULATION, THERMAL AND ACOUSTICAL (MINERAL FIBER, DUCT LINING MATERIAL) |
| UFC 3-450-01 : 2003 | UNIFIED FACILITIES CRITERIA - NOISE AND VIBRATION CONTROL |
| ASTM E 1042 : 2002 : R2014 | Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
| CSA Z107.9 : 2000 | STANDARD FOR CERTIFICATION OF NOISE BARRIERS |
| ASTM E 1376 : 1990 : R2002 | Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels (Withdrawn 2005) |
| SAE J 2883 : 2015 | LABORATORY MEASUREMENT OF RANDOM INCIDENCE SOUND ABSORPTION TESTS USING A SMALL REVERBERATION ROOM |
| ASTM E 1042 : 2002 : R2008 | Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
| ASTM E 596 : 1996 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ASTM E 1433 : 2004 | Standard Guide for Selection of Standards on Environmental Acoustics (Withdrawn 2010) |
| ASTM C 1014 : 2017 : REDLINE | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 842 : 2005 : R2010 : EDT 1 | Standard Specification for Application of Interior Gypsum Plaster |
| ASTM E 2235 : 2004 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| ASTM E 1704 : 1995 | Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures |
| NAAMM DEMA 111970 : 2012 | GUIDE SPECIFICATIONS FOR SECURITY METAL CEILINGS |
| ASTM E 2963 : 2016 : REDLINE | Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments |
| MIL-DTL-24688 Revision A:2011 | INSULATION, THERMAL AND ACOUSTIC ABSORPTIVE, CELLULAR POLYIMIDE FOAM |
| ASTM E 2235 : 2004 : R2012 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| SAE J 1324 : 2016 | ACOUSTICAL AND THERMAL MATERIALS TEST PROCEDURE |
| ASTM E 1375 : 1990 : R1994 : EDT 1 | Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers |
| ASTM E 1414/E1414M : 2016 : REDLINE | Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum |
| ASTM C 843 : 2017 : REDLINE | Standard Specification for Application of Gypsum Veneer Plaster |
| ASTM C 842 : 2005 | Standard Specification for Application of Interior Gypsum Plaster |
| ASTM E 1704 : 1995 : R2010 | Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures |
| ASTM E 1704 : 1995 : R2002 | Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures |
| ANSI S1.11 : 2014 | SPECIFICATION FOR OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND ANALOG AND DIGITAL FILTERS |
| ASTM E 795 : 2016 : REDLINE | Standard Practices for Mounting Test Specimens During Sound Absorption Tests |
| ANSI/ASA S1.6 : 2016 | PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS |
| ANSI/ASA S1.26 : 2014 | METHOD FOR CALCULATION OF THE ABSORPTION OF SOUND BY THE ATMOSPHERE |
| ANSI S1.43 : 1997 | SPECIFICATIONS FOR INTEGRATING-AVERAGING SOUND LEVEL METERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.