ASTM C 42/C 42M : 2016-10
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEST METHOD FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE
Superseded date
08-24-2020
Published date
10-01-2016
CONTAINED IN VOL. 04.02, 2018 Defines obtaining, preparing, and testing cores drilled from concrete for length or compressive strength or splitting tensile strength determinations.
| Committee |
C 09
|
| DevelopmentNote |
Supersedes ASTM C 42 (08/2001) Also numbered as AASHTO T 24M/T 24. (08/2015)
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| ACI 332.1R : 2006 | GUIDE TO RESIDENTIAL CONCRETE CONSTRUCTION |
| ACI 207.3R : 2018 | REPORT ON PRACTICES FOR EVALUATION OF CONCRETE IN EXISTING MASSIVE STRUCTURES FOR SERVICE CONDITIONS |
| ACI 364.4T : 2010 | TECHNOTE: DETERMINING THE LOAD CAPACITY OF A STRUCTURE WHEN AS-BUILT DRAWINGS ARE UNAVAILABLE |
| ACI 503.7 : 2007 | SPECIFICATION FOR CRACK REPAIR BY EPOXY INJECTION |
| ACI 546.2R : 2010 | GUIDE TO UNDERWATER REPAIR OF CONCRETE |
| ASTM C 457/C457M : 2016 : REDLINE | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
| ACI 369.1 : 2017 | STANDARD REQUIREMENTS FOR SEISMIC EVALUATION AND RETROFIT OF EXISTING CONCRETE BUILDINGS AND COMMENTARY |
| ASTM C 469 : 2002 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
| ASCE/SEI 41-17:2017 | SEISMIC EVALUATION AND RETROFIT OF EXISTING BUILDINGS |
| ASTM C 1140 : 2003 | Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels |
| ASTM C 1556 : 2011 : REV A | Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
| ASTM C 1194 : 2003 : R2011 | Standard Test Method for Compressive Strength of Architectural Cast Stone |
| ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 497 : 2018-02 | TEST METHODS FOR CONCRETE PIPE, MANHOLE SECTIONS, OR TILE |
| ASTM C 1556 : 2011 | Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
| ASTM C 1760 : 2012 | Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete (Withdrawn 2021) |
| ASTM C 1140/C1140M : 2011 : REDLINE | Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels |
| ASTM D 6489 :1999 | Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
| ASTM C 1152/C1152M : 2004 : R2012 : EDT 1 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM D 6489 : 1999 : R2006 | Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
| ACI 207.5R : 2011 | REPORT ON ROLLER-COMPACTED MASS CONCRETE |
| 16/30338749 DC : 0 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| ASTM C 915 : 1979 : R1995 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ASTM C 915 : 1979 : R2002 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ASTM C 496/C496M : 2017 : REDLINE | Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens |
| AASHTO PP 73 : 2013 : R2015 | PRACTICE FOR QUALITY ASSURANCE, JOB SITE QUALITY CONTROL, AND REAPPLICATION OF PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM C 935 : 2013 | Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast |
| ASTM C 469 : 2002 : EDT 1 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
| UFC 4-151-10 : Change 1 | UNIFIED FACILITIES CRITERIA - GENERAL CRITERIA FOR WATERFRONT CONSTRUCTION |
| ASTM C 1604/C1604M : 2005 : R2012 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ACI 506.5R : 2009 | GUIDE FOR SPECIFYING UNDERGROUND SHOTCRETE |
| ACI ITG-8R : 2010 | REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE |
| ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ACI 349.3R : 2018 | REPORT ON EVALUATION AND REPAIR OF EXISTING NUCLEAR SAFETY-RELATED CONCRETE STRUCTURES |
| ASTM D 6684 : 2004 | Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems |
| ASTM D 6489 : 1999 : R2012 | Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating |
| ASTM C 1399/C1399M : 2010 | Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete |
| ASTM C 1757 : 2013 | Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022) |
| ASTM C 1804 : 2014 : EDT 1 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
| ASTM C 825 : 2006 : R2011 | Standard Specification for Precast Concrete Barriers |
| ASTM C 823 : 2000 | Standard Practice for Examination and Sampling of Hardened Concrete in Constructions |
| ASTM C 1140 : 2003 : REV A | Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels |
| ASTM C 78/C78M : 2018 : REDLINE | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
| ASTM C 873/C873M : 2015 : REDLINE | Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
| ASTM C 1116/C1116M : 2010 | Standard Specification for Fiber-Reinforced Concrete |
| UNI EN ISO 21809-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| ACI 355.2 : 2007 | QUALIFICATION OF POST-INSTALLED MECHANICAL ANCHORS IN CONCRETE AND COMMENTARY |
| ACI MNL 3 : 0 | GUIDE TO THE CODE FOR ASSESSMENT, REPAIR, AND REHABILITATION OF EXISTING CONCRETE STRUCTURES |
| ASTM C 1604/C1604M : 2005 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| DKD-R 3-5 :2018 | PRACTICE FOR QUALITY ASSURANCE, JOB SITE QUALITY CONTROL, AND REAPPLICATION OF PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| AASHTO T 198 : 2015(R2019) | Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens<br> |
| ASCE 41 06 : 2007 | SEISMIC REHABILITATION OF EXISTING BUILDINGS |
| ACI 369R : 2011 | GUIDE FOR SEISMIC REHABILITATION OF EXISTING CONCRETE FRAME BUILDINGS AND COMMENTARY |
| ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI 318M : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318M-14) AND COMMENTARY (ACI 318RM-14) |
| ACI 355.4M : 2011 | QUALIFICATION OF POST-INSTALLED ADHESIVE ANCHORS IN CONCRETE AND COMMENTARY (METRIC VERSION) |
| ACI 533R : 2011 | GUIDE FOR PRECAST CONCRETE WALL PANELS |
| ACI 350.5 : 2012 | SPECIFICATIONS FOR ENVIRONMENTAL CONCRETE STRUCTURES |
| ACI 506.2M : 2013 | SPECIFICATION FOR SHOTCRETE [METRIC] |
| ASTM C 823/C823M : 2012 : R2017 | Standard Practice for Examination and Sampling of Hardened<brk/> Concrete in Constructions |
| ASTM C 1792 : 2014 | Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023) |
| ASTM D 6684 : 2004 : R2010 | Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems |
| ASTM C 1152/C1152M:2004 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM C 1152/C1152M : 2004 : EDT 1 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM C 873 : 2004 | Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
| ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
| ACI 522R : 2010 | REPORT ON PERVIOUS CONCRETE |
| ASTM C 469/C469M : 2014 : REDLINE | Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression |
| ACI 548.13M : 2014 | SPECIFICATION FOR BONDING FRESH CONCRETE TO HARDENED CONCRETE WITH A MULTI-COMPONENT EPOXY ADHESIVE (METRIC) |
| AASHTO PP 89 : 2018 | Standard Practice for Grinding the Ends of Cylindrical Concrete Specimens<br> |
| ASTM C 1218/C1218M : 2017 : REDLINE | Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
| ASTM C 39/C39M : 2018 : REDLINE | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| ACI 355.4 : 2011 | QUALIFICATION OF POST-INSTALLED ADHESIVE ANCHORS IN CONCRETE AND COMMENTARY |
| ACI 365.1R : 2017 | REPORT ON SERVICE LIFE PREDICTION |
| ASTM C 341/C341M : 2014-01 | PRACTICE FOR PREPARATION AND CONDITIONING OF CAST, DRILLED, OR SAWED SPECIMENS OF HYDRAULIC-CEMENT MORTAR AND CONCRETE USED FOR LENGTH CHANGE MEASUREMENTS |
| CSA A23.4 : 2016 | PRECAST CONCRETE - MATERIALS AND CONSTRUCTION |
| ACI 369.1M : 2017 | STANDARD REQUIREMENTS FOR SEISMIC EVALUATION AND RETROFIT OF EXISTING CONCRETE BUILDINGS (ACI 369.1M-17) AND COMMENTARY |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
| ACI 214.4R : 2010 | GUIDE FOR OBTAINING CORES AND INTERPRETING COMPRESSIVE STRENGTH RESULTS |
| ASTM C 1231/C1231M : 2015 : REDLINE | Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens |
| ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ACI 364.1R : 2007 | GUIDE FOR EVALUATION OF CONCRETE STRUCTURES PRIOR TO REHABILITATION |
| ACI 562 : 2016 | CODE REQUIREMENTS FOR ASSESSMENT, REPAIR, AND REHABILITATION OF EXISTING CONCRETE STRUCTURES AND COMMENTARY |
| ASCE/SEI 41 13 : 2014 | SEISMIC EVALUATION AND RETROFIT OF EXISTING BUILDINGS |
| ASCE/SEI 30 14 : 2014 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
| ASTM C 1116/C1116M : 2010 : REV A | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 915 : 1979 : R2010 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ASTM C 1804 : 2014 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
| ASTM C 1138M : 2012 : REDLINE | Standard Test Method for Abrasion Resistance of Concrete (Underwater Method) |
| ASTM C 1556 : 2011 : REV A : R2016 | Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
| ASTM C 823/C823M : 2012 | Standard Practice for Examination and Sampling of Hardened<brk> Concrete in Constructions |
| ACI 522R : 2010(R2011) | REPORT ON PERVIOUS CONCRETE |
| ACI 548.13 : 2014 | SPECIFICATION FOR BONDING FRESH CONCRETE TO HARDENED CONCRETE WITH A MULTI-COMPONENT EPOXY ADHESIVE |
| ASTM D 1633 : 2017 | Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders |
| ASTM C 944/C944M : 2012 : REDLINE | Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method |
| ASTM C 174/C174M : 2017 : REDLINE | Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores |
| ASTM C 1856/C1856M : 2017 | Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ASTM C 1585 : 2013 : REDLINE | Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes |
| ACI 437R : 2003 | STRENGTH EVALUATION OF EXISTING CONCRETE BUILDINGS |
| ASTM D 7958/D7958M : 2017 | Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
| ASTM C 1399/C1399M : 2010 : R2015 | Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete (Withdrawn 2024) |
| ASTM C 825 : 2006 | Standard Specification for Precast Concrete Barriers |
| ASTM C 215 : 2014 : REDLINE | Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens |
| ASTM C 1245/C1245M : 2012 : REDLINE | Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test) |
| ASTM C 1194 : 2003 | Standard Test Method for Compressive Strength of Architectural Cast Stone |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| ACI PRC-522:2023 | Pervious Concrete—Report |
| ASTM C 617/C617M : 2015 : REDLINE | Standard Practice for Capping Cylindrical Concrete Specimens |
| ASTM C 642 : 2013 : REDLINE | Standard Test Method for Density, Absorption, and Voids in Hardened Concrete |
| ASTM C 1231/C1231M : 2015 : REDLINE | Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens |
| ASTM C 496/C496M : 2017 : REDLINE | Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens |
| ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
| ASTM C 174/C174M : 2017 : REDLINE | Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.