ASTM C 192/C192M : 2000
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
12-31-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 09
|
| DocumentType |
Standard Practice
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This practice covers procedures for making and curing test specimens of concrete in the laboratory under accurate control of materials and test conditions using concrete that can be consolidated by rodding or vibration as described herein.
1.2 The values stated in either inch-pound units or SI units shall be regarded separately as standard. The SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of each other. Combining values from the two systems may result in nonconformance.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 5139 : 2019 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
| ASTM A 1096/A1096M : 2015 | Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement |
| ASTM C 157/C157M : 2017 | Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete |
| ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 1800/C1800M : 2016 | Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor |
| ASTM C 1602/C1602M : 2018 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
| ASTM C 1231/C1231M : 2015 | Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens |
| ASTM C 470/C470M : 2015 | Standard Specification for Molds for Forming Concrete Test Cylinders Vertically |
| ASTM C 469/C469M : 2014 : EDT 1 | Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression |
| ASTM C 1688/C1688M : 2014 : REV A | Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023) |
| ASTM C 928/C928M : 2020 : REV A | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ASTM C 293/C293M : 2016 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading) |
| ASTM C 858 : 2019 | Standard Specification for Underground Precast Concrete Utility Structures |
| ASTM C 39/C39M : 2020 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| ASTM C 232/C232M : 2020 | Standard Test Method for Bleeding of Concrete |
| ASTM C 465 : 2019 | Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements |
| ASTM C 1176/C1176M : 2020 | Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table |
| ASTM C 1293 : 2020 : REV A | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| ASTM C 1439 : 2019 | Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar |
| ASTM C 1698 : 2019 | Standard Test Method for Autogenous Strain of Cement Paste and Mortar |
| ASTM C 862 : 2016 : R2020 | Standard Practice for Preparing Refractory Concrete Specimens by Casting |
| ASTM C 878/C878M : 2014 : REV A | Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete |
| ASTM C 1747/C1747M : 2013 | Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion (Withdrawn 2022) |
| ASTM C 1712 : 2020 | Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test |
| ASTM C 827/C827M : 2016 | Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
| ASTM C 494/C494M : 2019 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 1856/C1856M : 2017 | Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete |
| ASTM C 1579 : 2013 | Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) |
| ASTM C 1904 : 2020 | Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products |
| ASTM C 1757 : 2013 | Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022) |
| ASTM C 666/C666M : 2015 | Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024) |
| ASTM C 1768/C1768M : 2012 : R2017 | Standard Practice for Accelerated Curing of Concrete Cylinders |
| ASTM C 233/C233M : 2018 | Standard Test Method for Air-Entraining Admixtures for Concrete |
| ASTM A 1081/A1081M : 2015 | Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand |
| ASTM C 226 : 2019 | Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement |
| ASTM D 7958/D7958M : 2017 | Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
| ASTM G 109 : 2007 : R2013 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| ASTM C 563 : 2020 | Standard Guide for Approximation of Optimum SO<inf>3</inf> in Hydraulic Cement |
| ASTM C 1646/C1646M : 2016 | Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete |
| ASTM C 567/C567M : 2019 | Standard Test Method for Determining Density of Structural Lightweight Concrete |
| ASTM C 110 : 2020 | Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
| ASTM C 1610/C1610M : 2019 | Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique |
| ASTM C 1776/C1776M : 2017 | Standard Specification for Wet-Cast Precast Modular Retaining Wall Units |
| ASTM C 1399/C1399M : 2010 : R2015 | Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete (Withdrawn 2024) |
| ASTM C 918/C918M : 2020 | Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |
| ASTM D 7705/D7705M : 2012 : R2019 | Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
| ASTM C 1622/C1622M : 2010 : R2016 : EDT 1 | Standard Specification for Cold-Weather Admixture Systems |
| ASTM D 7914/D7914M : 2021 | Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations |
| ASTM C 1585 : 2020 | Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes |
| ASTM C 78/C78M : 2018 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
| ASTM C 403/C403M : 2016 | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
| ASTM C 943 : 2017 | Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory |
| ASTM C 1758/C1758M : 2015 | Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete |
| ASTM C 330/C330M : 2017 : REV A | Standard Specification for Lightweight Aggregates for Structural Concrete |
| ASTM D 1985 : 2013 : R2019 | Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks |
| ASTM C 341/C341M : 2018 | Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements |
| ASTM C 882/C882M : 2020 | Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear |
| ASTM D 4832 : 2016 : EDT 1 | Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders |
| ASTM C 1753/C1753M : 2015 : EDT 1 | Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements |
| ASTM C 496/C496M : 2017 | Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens |
| ASTM C 1824 : 2016 : R2021 | Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles |
| ASTM C 979/C979M : 2016 | Standard Specification for Pigments for Integrally Colored Concrete |
| ASTM C 1609/C1609M : 2019 : REV A | Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) |
| ASTM C 512/C512M : 2015 | Standard Test Method for Creep of Concrete in Compression |
| ASTM C 1556 : 2011 : REV A : R2016 | Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
| ASTM C 231/C231M : 2017 : REV A | Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method |
| ASTM C 1074 : 2019 : EDT 1 | Standard Practice for Estimating Concrete Strength by the Maturity Method |
| ASTM C 215 : 2019 | Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens |
| ASTM D 7913/D7913M : 2014 : R2020 | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
| ASTM C 1017/C1017M : 2013 : EDT 1 | Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022) |
| ASTM A 955/A955M : 2020 : REV C | Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement |
| ASTM A 944 : 2010 : R2015 | Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens |
| ASTM E 660 : 1990 : R2015 | Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine |
| ASTM C 796/C796M : 2019 | Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam |
| ASTM C 1792 : 2014 | Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023) |
| ASTM C 387/C387M : 2017 | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
| ASTM C 1581/C1581M : 2018 : REV A | Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage |
| ASTM C 1202 : 2019 | Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.