ASTM C 188 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Density of Hydraulic Cement
Hardcopy , PDF
07-12-2023
English
12-21-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method covers the determination of the density of hydraulic cement. Its particular usefulness is in connection with the design and control of concrete mixtures.
| Committee |
C 01
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the density of hydraulic cement. Its particular usefulness is in connection with the design and control of concrete mixtures.
1.2The density of hydraulic cement is defined as the mass of a unit volume of the solids.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1329/C1329M : 2023 | Standard Specification for Mortar Cement |
| ASTM C 845/C845M : 2018 | Standard Specification for Expansive Hydraulic Cement |
| ASTM C 1157/C1157M : 2020 : REV A | Standard Performance Specification for Hydraulic Cement |
| ASTM C 138/C138M : 2017 : REV A | Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete |
| ASTM C 91/C91M : 2023 | Standard Specification for Masonry Cement |
| ASTM C 1800/C1800M : 2016 | Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor |
| ASTM E 694 : 2018 | Standard Specification for Laboratory Glass Volumetric Apparatus |
| ASTM C 1328/C1328M : 2023 | Standard Specification for Plastic (Stucco) Cement |
| ASTM E 2278 : 2013 : R2019 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage |
| ASTM C 604 : 2018 | Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer |
| ASTM C 10/C10M : 2019 | Standard Specification for Natural Cement |
| ASTM C 595/C595M : 2021 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 989/C989M : 2022 | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM C 128 : 2022 | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| ASTM E 2277 : 2014(R2019) | Standard Guide for Design and Construction of Coal Ash Structural Fills |
| ASTM C 1603 : 2023 | Standard Test Method for Measurement of Solids in Water |
| ASTM C 1608 : 2017 | Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste |
| ASTM C 311/C311M : 2022 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
| ASTM C 110 : 2020 | Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
| ASTM E 2243 : 2013 : R2019 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation |
| ASTM C 125 : 2021 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM D 2638 : 1991 : R1997 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
| ASTM D 2638 : 1991 : R2002 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
| ASTM D 2638 : 2010 : R2015 : EDT 1 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
| ASTM C 125 : 2000 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM D 2638 : 2010 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
| ASTM D 2638 : 2006 | Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
| ASTM C 114 : 2009 | Standard Test Methods for Chemical Analysis of Hydraulic Cement |
| ASTM C 125 : 2021 : REV A | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM C 125 : 2020 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM C 114 : 2018 | Standard Test Methods for Chemical Analysis of Hydraulic Cement |
| ASTM C 114 : 2022 | Standard Test Methods for Chemical Analysis of Hydraulic Cement |
| ASTM C 125 : 2009 | Standard Terminology Relating to Concrete and Concrete Aggregates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.