ASTM C 185 : 2015 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Air Content of Hydraulic Cement Mortar
Hardcopy , PDF
12-09-2019
English
10-06-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 01
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the determination of the air content of hydraulic cement mortar under the conditions hereinafter specified.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3Values in SI shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion and Rounding in IEEE/ASTM SI 10, of measurements made in other units.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2
| ASTM C 778 : 2021 | Standard Specification for Standard Sand |
| ASTM C 1329/C1329M : 2023 | Standard Specification for Mortar Cement |
| ASTM C 845/C845M : 2018 | Standard Specification for Expansive Hydraulic Cement |
| ASTM C 1439 : 2019 | Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar |
| ASTM C 1328/C1328M : 2023 | Standard Specification for Plastic (Stucco) Cement |
| ASTM C 465 : 2022 | Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements |
| ASTM C 827/C827M : 2016 | Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
| ASTM C 359 : 2021 | Standard Test Method for Early Stiffening of Hydraulic-Cement (Mortar Method) |
| ASTM C 10/C10M : 2019 | Standard Specification for Natural Cement |
| ASTM C 233/C233M : 2018 | Standard Test Method for Air-Entraining Admixtures for Concrete |
| ASTM C 989/C989M : 2022 | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM C 780 : 2020 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 311/C311M : 2022 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
| ASTM C 110 : 2020 | Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
| ASTM C 1157/C1157M : 2020 : REV A | Standard Performance Specification for Hydraulic Cement |
| ASTM C 260/C260M : 2010 : REV A : R2016 | Standard Specification for Air-Entraining Admixtures for Concrete |
| ASTM C 91/C91M : 2023 | Standard Specification for Masonry Cement |
| ASTM C 1107/C1107M : 2020 | Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) |
| ASTM C 226 : 2022 | Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement |
| ASTM C 482 : 2020 | Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste |
| ASTM C 1222 : 2023 | Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement |
| ASTM C 1810/C1810M : 2022 | Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures |
| ASTM C 150/C150M : 2022 | Standard Specification for Portland Cement |
| ASTM C 183/C183M : 2022 | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
| ASTM C 1240 : 2020 | Standard Specification for Silica Fume Used in Cementitious Mixtures |
| ASTM C 595/C595M : 2021 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 1489 : 2015 : R2022 | Standard Specification for Lime Putty for Structural Purposes |
| ASTM C 1603 : 2023 | Standard Test Method for Measurement of Solids in Water |
| ASTM C 1093 : 2022 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1506 : 2017 | Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters |
| ASTM C 387/C387M : 2017 | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
| ASTM C 938 : 2019 | Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete |
| ASTM C 1005 : 2019 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1329 : 2003 : REV A | Standard Specification for Mortar Cement |
| ASTM C 1329 : 2000 | Standard Specification for Mortar Cement |
| ASTM C 1157 : 2002 | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1329 : 2004 | Standard Specification for Mortar Cement |
| ASTM C 1157 : 2003 | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1328 : 2005 | Standard Specification for Plastic (Stucco) Cement |
| ASTM C 1005 : 2000 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1005 : 2017 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1328 : 2003 | Standard Specification for Plastic (Stucco) Cement |
| ASTM C 1157 : 2000 : REV A | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1005 : 2010 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1157 : 2008 : REV A | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1005 : 2018 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1329 : 2005 | Standard Specification for Mortar Cement |
| ASTM C 1328 : 2000 | Standard Specification for Plastic (Stucco) Cement |
| ASTM C 1328 : 2003 : REV A | Standard Specification for Plastic (Stucco) Cement |
| ASTM C 1005 : 2005 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1157 : 2008 | Standard Performance Specification for Hydraulic Cement |
| ASTM C 1329 : 2003 | Standard Specification for Mortar Cement |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.