ASTM C 1776/C1776M : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Wet-Cast Precast Modular Retaining Wall Units
Hardcopy , PDF
06-17-2022
English
02-28-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 04.05, 2017 Defines wet-cast precast modular retaining wall units cast from first-purpose concrete with or without the inclusion of steel reinforcement.
| Committee |
C 27
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This specification covers wet-cast precast modular retaining wall units cast from first-purpose concrete with or without the inclusion of steel reinforcement. The precast units covered by this specification are machine-placed units intended for use in the construction of dry stacked modular retaining wall systems.
1.2The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.3Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text of the specification, the SI units are shown in brackets. The values stated in each system are not exact equivalents. Therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM C 125 : 2021 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM C 31/C31M : 2019 : REV A | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
| ASTM C 94/C94M : 2020 | Standard Specification for Ready-Mixed Concrete |
| ASTM A 615/A615M : 2016-03 | SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM C 173/C173M : 2009 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
| ASTM C 94/C94M : 2021 : REV B | Standard Specification for Ready-Mixed Concrete |
| ASTM C 1157/C1157M : 2017 : REDLINE | Standard Performance Specification for Hydraulic Cement |
| ASTM A 767/A767M : 2019 | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
| ASTM C 150/C150M : 2017-04 | SPECIFICATION FOR PORTLAND CEMENT |
| ASTM C 31/C31M : 2021 : REV A | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
| ASTM C 39/C39M : 2021 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ASTM C 595/C595M : 2021 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 192/C192M : 2000 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM A 706/A706M : 2016 : REDLINE | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| ASTM A 934/A934M : 2019 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars |
| ASTM C 979/C979M : 2016 : REDLINE | Standard Specification for Pigments for Integrally Colored Concrete |
| ASTM C 1611/C1611M : 2021 | Standard Test Method for Slump Flow of Self-Consolidating Concrete |
| ASTM A 1055/A1055M : 2016 : REDLINE | Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars |
| ASTM C 125 : 2000 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM C 595/C595M : 2020 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 94/C94M : 2021 : REV A | Standard Specification for Ready-Mixed Concrete |
| ASTM A 706/A706M : 2004 | Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
| ASTM C 1157/C1157M : 2020 | Standard Performance Specification for Hydraulic Cement |
| ASTM C 150/C150M : 2021 | Standard Specification for Portland Cement |
| ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
| ASTM C 39/C39M : 2020 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| ASTM C 1611/C1611M : 2018 | Standard Test Method for Slump Flow of Self-Consolidating Concrete |
| ASTM C 1157/C1157M : 2020 : REV A | Standard Performance Specification for Hydraulic Cement |
| ASTM C 666/C666M : 2015 : REDLINE | Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing |
| ASTM C 173/C173M : 2016 : REDLINE | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
| ASTM C 31/C31M : 2021 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
| ASTM C 94/C94M : 2021 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 125 : 2021 : REV A | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM C 494/C494M : 2010 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 150/C150M : 2020 | Standard Specification for Portland Cement |
| ASTM C 125 : 2020 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM C 494/C494M : 2017 : REDLINE | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 125 : 2009 | Standard Terminology Relating to Concrete and Concrete Aggregates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.