ASTM C 167 : 2022
Current
The latest, up-to-date edition.
Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
Hardcopy , PDF
English
12-14-2022
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 16
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the determination of thickness and density of flexible, felted, or woven thermal insulating blankets, rolls, or batts composed of fibrous materials, with or without surface covering or reinforcement.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1728 : 2022 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 1146 : 2009 : R2018 | Standard Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air (Withdrawn 2024) |
| ASTM C 1373/C1373M : 2011 : R2017 | Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions |
| ASTM C 165 : 2007 : R2017 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
| ASTM C 892 : 2019 | Standard Specification for High-Temperature Fiber Blanket Thermal Insulation |
| ASTM C 1071 : 2019 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 687 : 2018 | Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation |
| ASTM C 411 : 2019 | Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation |
| ASTM C 800 : 2019 | Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type) |
| ASTM C 1104/C1104M : 2019 | Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
| ASTM C 553 : 2013 : R2019 | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
| ASTM C 1774 : 2013 : R2019 | Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems |
| ASTM C 1086 : 2020 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
| ASTM C 1696 : 2020 | Standard Guide for Industrial Thermal Insulation Systems |
| ASTM C 303 : 2021 | Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation |
| ASTM C 518 : 2021 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 1290 : 2016 : R2021 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 592 : 2022 : REV A | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 302 : 2013 : R2022 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
| ASTM E 970 : 2017 : EDT 1 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| ASTM C 447 : 2015 : R2022 | Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations |
| ASTM C 547 : 2022 : REV A | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 653 : 2017 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation |
| ASTM C 665 : 2017 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
| ASTM C 686 : 2017 | Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation |
| ASTM C 991 : 2016 | Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings |
| ASTM C 1497 : 2016 | Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation |
| ASTM C 168 : 2024 | Standard Terminology Relating to Thermal Insulation |
| ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.