ASTM C 1535 : 2005 : R2023
Current
The latest, up-to-date edition.
Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
Hardcopy , PDF
English
03-09-2023
Committee |
C 11
|
DocumentType |
Standard Practice
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice covers the minimum requirements and procedures for field or prefabricated application of Class PI Exterior Insulation and Finish Systems (EIFS). Class PI EIFS are systems applied over polyisocyanurate insulation board, in which the base coat ranges from not less than 1/16in. (1.6 mm) to 1/4in. (6.4 mm) in dry thickness, depending upon the number of nonmetallic reinforcing mesh layers encapsulated in the base coat. The base coat is then covered with a finish coat of various thickness in a variety of textures and colors. The insulation board shall be applied over a substrate or over open framing.
1.2This practice does not cover Class PI EIFS with drainage. Consult the EIFS producer for information.
1.3The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only.
1.4The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes shall not be considered as requirements of the standard.
1.5This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1325 : 2022 | Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units |
ASTM C 1280 : 2018 | Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing |
ASTM C 1063 : 2023 | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
ASTM C 1325 : 2022 : EDT 1 | Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units |
ASTM C 1278/C1278M : 2024 | Standard Specification for Fiber-Reinforced Gypsum Panel |
ASTM C 11 : 2023 | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
ASTM C 11 : 2024 | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
ASTM C 1289 : 2023 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1481 : 2012 : R2024 | Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS) |
ASTM E 1825 : 2024 | Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems |
ASTM C 1177/C1177M : 2024 | Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
ASTM C 1280 : 2018 : R2023 | Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing |
ASTM C 1177/C1177M : 2017 | Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
ASTM C 11 : 2018 : REV B | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
ASTM C 1289 : 2023 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM E 1825 : 2021 | Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems |
ASTM C 1289 : 2022 : REV A | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
ASTM C 1186 : 2022 : EDT 1 | Standard Specification for Flat Fiber-Cement Sheets |
ASTM C 1325 : 2022 | Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units |
ASTM C 1063 : 2022 : REV A | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
ASTM C 1481 : 2012 : R2017 | Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS) |
ASTM C 1186 : 2022 | Standard Specification for Flat Fiber-Cement Sheets |
ASTM C 11 : 2024 : REV A | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
ASTM C 1278/C1278M : 2017 | Standard Specification for Fiber-Reinforced Gypsum Panel |
ASTM C 1382 : 2016 : R2023 | Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.