ASTM C 125 : 2020
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Concrete and Concrete Aggregates
Available format(s)
Hardcopy , PDF
Superseded date
09-20-2021
Superseded by
Language(s)
English
Published date
02-12-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 09
|
| DocumentType |
Reference Material
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This standard is a compilation of definitions of terms as they are used in standards under the jurisdiction of Committee C09.
1.2Other terminology under the jurisdiction of Committee C09 is included in two specialized standards. Terms relating to constituents of concrete aggregates are defined in Descriptive Nomenclature C294. Terms relating to constituents of aggregates for radiation-shielding concrete are defined in Descriptive Nomenclature C638.
1.3Related terminology for hydraulic cement is included in Terminology C219. In the event of conflict between definitions in Terminology C125 and definitions in Terminology C219, definitions in Terminology C125 shall govern for Committee C09 standards.
1.4When a term is used in an ASTM standard for which Committee C09 is responsible, it is included herein only if used in more than one Committee C09 standard.
Note 1:The subcommittee responsible for this standard will review definitions on a five-year basis to determine if the definition is still appropriate as stated. Revisions will be made when determined necessary. The year shown in parentheses at the end of a definition indicates the year the definition or revision to the definition was approved. A letter R and a year indicate when the definition was reviewed. No date indicates the term has not yet been reviewed.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1800/C1800M : 2016 | Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor |
| ASTM C 1438 : 2013 : R2017 | Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar |
| ASTM C 1701/C1701M : 2017 : REV A | Standard Test Method for Infiltration Rate of In Place Pervious Concrete |
| ASTM D 8337/D8337M : 2021 | Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test |
| ASTM D 8140 : 2018 | Standard Guide for the Use of Foundry Sand in Asphalt Mixtures |
| ASTM C 131/C131M : 2020 | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM C 827/C827M : 2016 | Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
| ASTM C 1709 : 2018 | Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete |
| ASTM C 938 : 2019 | Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete |
| ASTM C 913 : 2021 | Standard Specification for Precast Concrete Water and Wastewater Structures |
| ASTM C 311/C311M : 2018 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
| ASTM C 702/C702M : 2018 | Standard Practice for Reducing Samples of Aggregate to Testing Size |
| ASTM C 40/C40M : 2020 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete |
| ASTM C 157/C157M : 2017 | Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete |
| ASTM C 1138M : 2019 | Standard Test Method for Abrasion Resistance of Concrete (Underwater Method) |
| ASTM C 1874 : 2020 | Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer |
| ASTM C 1293 : 2020 : REV A | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| ASTM D 6023 : 2016 | Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM) |
| ASTM C 39/C39M : 2021 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| ASTM C 1757 : 2013 | Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete (Withdrawn 2022) |
| ASTM C 188 : 2017 | Standard Test Method for Density of Hydraulic Cement |
| ASTM C 786/C786M : 2017 | Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods |
| ASTM C 618 : 2019 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
| ASTM C 441/C441M : 2017 | Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction |
| ASTM C 1613 : 2017 | Standard Specification for Precast Concrete Grease Interceptor Tanks |
| ASTM C 1688/C1688M : 2014 : REV A | Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023) |
| ASTM C 1385/C1385M : 2010 : R2017 | Standard Practice for Sampling Materials for Shotcrete |
| ASTM C 305 : 2020 | Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency |
| ASTM C 597 : 2016 | Standard Test Method for Pulse Velocity Through Concrete |
| ASTM C 641 : 2017 | Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates |
| ASTM C 1602/C1602M : 2018 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
| ASTM C 1105 : 2008 : REV A : R2016 | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM C 900 : 2019 | Standard Test Method for Pullout Strength of Hardened Concrete |
| ASTM D 692/D692M : 2020 | Standard Specification for Coarse Aggregate for Asphalt Paving Mixtures |
| ASTM C 1222 : 2021 | Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement |
| ASTM D 6783 : 2005 : REV A : R2017 | Standard Specification for Polymer Concrete Pipe |
| ASTM C 1778 : 2020 | Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete |
| ASTM C 1723 : 2016 | Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy |
| ASTM C 1073 : 2018 | Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali |
| ASTM C 330/C330M : 2017 : REV A | Standard Specification for Lightweight Aggregates for Structural Concrete |
| ASTM C 31/C31M : 2021 : REV A | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
| ASTM C 204 : 2018 : EDT 1 | Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus |
| ASTM C 535 : 2016 | Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM D 4832 : 2016 : EDT 1 | Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders |
| ASTM C 989/C989M : 2018 : REV A | Standard Specification for Slag Cement for Use in Concrete and Mortars |
| ASTM C 1252 : 2017 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
| ASTM C 1810/C1810M : 2021 : REV A | Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures |
| ASTM C 1621/C1621M : 2017 | Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring |
| ASTM C 953 : 2017 | Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM C 513/C513M : 2011 : R2019 | Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength |
| ASTM C 215 : 2019 | Standard Test Method for Fundamental Transverse, Longitudinal, and<brk/> Torsional Resonant Frequencies of Concrete Specimens |
| ASTM C 823/C823M : 2012 : R2017 | Standard Practice for Examination and Sampling of Hardened<brk/> Concrete in Constructions |
| ASTM C 387/C387M : 2017 | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
| ASTM C 29/C29M : 2017 : REV A | Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate |
| ASTM C 1582/C1582M : 2011 : R2017 : EDT 1 | Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete |
| ASTM C 1698 : 2019 | Standard Test Method for Autogenous Strain of Cement Paste and Mortar |
| ASTM C 78/C78M : 2021 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
| ASTM C 878/C878M : 2014 : REV A | Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete |
| ASTM C 494/C494M : 2019 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM C 1856/C1856M : 2017 | Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete |
| ASTM C 1170/C1170M : 2020 | Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table |
| ASTM C 1439 : 2019 | Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar |
| ASTM C 1812/C1812M : 2015 : EDT 1 | Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests |
| ASTM C 1260 : 2021 | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
| ASTM C 1697 : 2018 | Standard Specification for Blended Supplementary Cementitious Materials |
| ASTM D 7958/D7958M : 2017 | Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
| ASTM C 1152/C1152M : 2020 | Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
| ASTM C 1798/C1798M : 2019 | Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete |
| ASTM C 1227 : 2020 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM C 1581/C1581M : 2018 : REV A | Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage |
| ASTM C 349 : 2018 | Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars<brk/> (Using Portions of Prisms Broken in Flexure) |
| ASTM C 136/C136M : 2019 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM C 1583/C1583M : 2020 | Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) |
| ASTM C 430 : 2017 | Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve |
| ASTM C 1758/C1758M : 2015 | Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete |
| ASTM C 882/C882M : 2020 | Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear |
| ASTM C 1753/C1753M : 2015 : EDT 1 | Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements |
| ASTM C 1679 : 2017 | Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry |
| ASTM C 1556 : 2011 : REV A : R2016 | Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
| ASTM C 174/C174M : 2017 | Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores |
| ASTM C 1741 : 2018 | Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout |
| ASTM C 1017/C1017M : 2013 : EDT 1 | Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022) |
| ASTM C 123/C123M : 2014 | Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023) |
| ASTM C 1622/C1622M : 2010 : R2016 : EDT 1 | Standard Specification for Cold-Weather Admixture Systems |
| ASTM D 806 : 2019 | Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures |
| ASTM C 940 : 2016 | Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM C 1580 : 2020 | Standard Test Method for Water-Soluble Sulfate in Soil |
| ASTM C 1708/C1708M : 2019 | Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements |
| ASTM C 331/C331M : 2017 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM D 6155 : 2019 | Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures |
| ASTM C 457/C457M : 2016 | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
| ASTM C 341/C341M : 2018 | Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements |
| ASTM C 51 : 2021 | Standard Terminology Relating to Lime and Limestone (as Used by the Industry) |
| ASTM C 1797 : 2017 | Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete |
| ASTM C 1761/C1761M : 2017 | Standard Specification for Lightweight Aggregate for Internal Curing of Concrete |
| ASTM C 309 : 2019 | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
| ASTM C 937 : 2016 | Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete |
| ASTM D 7172 : 2014 | Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared (Withdrawn 2022) |
| ASTM C 1064/C1064M : 2017 | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
| ASTM C 1747/C1747M : 2013 | Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion (Withdrawn 2022) |
| ASTM C 1040/C1040M : 2016 : REV A | Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods |
| ASTM C 1567 : 2021 | Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) |
| ASTM C 939/C939M : 2016 : REV A | Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method) |
| ASTM C 1776/C1776M : 2017 | Standard Specification for Wet-Cast Precast Modular Retaining Wall Units |
| ASTM C 942/C942M : 2021 | Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM C 1059/C1059M : 2021 | Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete |
| ASTM C 918/C918M : 2020 | Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |
| ASTM C 1218/C1218M : 2020 | Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
| ASTM C 1585 : 2020 | Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes |
| ASTM D 1073 : 2016 | Standard Specification for Fine Aggregate for Asphalt Paving Mixtures |
| ASTM C 1740 : 2016 | Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method |
| ASTM C 1107/C1107M : 2020 | Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) |
| ASTM C 1524 : 2020 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM C 943 : 2017 | Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory |
| ASTM C 294 : 2019 | Standard Descriptive Nomenclature for Constituents of Concrete Aggregates |
| ASTM C 979/C979M : 2016 | Standard Specification for Pigments for Integrally Colored Concrete |
| ASTM C 803/C803M : 2018 | Standard Test Method for Penetration Resistance of Hardened Concrete |
| ASTM C 142/C142M : 2017 | Standard Test Method for Clay Lumps and Friable Particles in Aggregates |
| ASTM C 779/C779M : 2019 | Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces |
| ASTM C 1609/C1609M : 2019 : REV A | Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) |
| ASTM C 685/C685M : 2017 | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
| ASTM C 1090/C1090M : 2015 | Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout |
| ASTM C 1579 : 2021 | Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) |
| ASTM C 1777 : 2020 | Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter |
| ASTM C 1240 : 2020 | Standard Specification for Silica Fume Used in Cementitious Mixtures |
| ASTM C 128 : 2015 | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| ASTM C 1074 : 2019 : EDT 1 | Standard Practice for Estimating Concrete Strength by the Maturity Method |
| ASTM C 1712 : 2020 | Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test |
| ASTM C 897 : 2015 : R2020 | Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters |
| ASTM C 70 : 2020 | Standard Test Method for Surface Moisture in Fine Aggregate |
| ASTM C 1904 : 2020 | Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products |
| ASTM C 1383 : 2015 | Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method |
| ASTM C 1768/C1768M : 2012 : R2017 | Standard Practice for Accelerated Curing of Concrete Cylinders |
| ASTM C 1646/C1646M : 2016 | Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete |
| ASTM C 805/C805M : 2018 | Standard Test Method for Rebound Number of Hardened Concrete |
| ASTM C 1324 : 2020 : REV A | Standard Test Method for Examination and Analysis of Hardened Masonry Mortar |
| ASTM C 1140/C1140M : 2011 : R2019 | Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels |
| ASTM C 127 : 2015 | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
| ASTM C 348 : 2021 | Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars |
| ASTM C 884/C884M : 2016 | Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| ASTM C 602 : 2020 | Standard Specification for Agricultural Liming Materials |
| ASTM D 6024/D6024M : 2016 | Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application |
| ASTM D 1139/D1139M : 2015 | Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments |
| ASTM C 332 : 2017 | Standard Specification for Lightweight Aggregates for Insulating Concrete |
| ASTM D 8021 : 2020 | Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel |
| ASTM F 2480 : 2018 | Standard Guide for In-ground Concrete Skatepark |
| ASTM C 496/C496M : 2017 | Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens |
| ASTM C 232/C232M : 2020 : REV A | Standard Test Method for Bleeding of Concrete |
| ASTM C 512/C512M : 2015 | Standard Test Method for Creep of Concrete in Compression |
| ASTM F 3191 : 2016 | Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring |
| ASTM C 944/C944M : 2019 | Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method |
| ASTM C 1550 : 2020 | Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel) |
| ASTM C 1604/C1604M : 2005 : R2019 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ASTM C 1436 : 2013 | Standard Specification for Materials for Shotcrete (Withdrawn 2022) |
| ASTM D 6103/D6103M : 2017 : EDT 1 | Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) |
| ASTM C 1837 : 2017 | Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures |
| ASTM C 1792 : 2014 | Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023) |
| ASTM C 171 : 2020 | Standard Specification for Sheet Materials for Curing Concrete |
| ASTM C 192/C192M : 2019 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM C 941 : 2016 | Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 88/C88M : 2018 | Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate |
| ASTM C 637 : 2020 | Standard Specification for Aggregates for Radiation-Shielding Concrete |
| ASTM C 1141/C1141M : 2015 | Standard Specification for Admixtures for Shotcrete (Withdrawn 2024) |
| ASTM C 566 : 2019 | Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying |
| ASTM C 418 : 2020 | Standard Test Method for Abrasion Resistance of Concrete by Sandblasting |
| ASTM C 87/C87M : 2017 | Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
| ASTM D 7522/D7522M : 2021 | Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates |
| ASTM D 5106 : 2015 | Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures |
| ASTM C 33/C33M : 2018 | Standard Specification for Concrete Aggregates |
| ASTM C 1451 : 2018 | Standard Practice for Determining Variability of Concrete-Making Materials From a Single Source |
| ASTM C 1803 : 2020 | Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser |
| ASTM C 928/C928M : 2020 : REV A | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ASTM C 219 : 2020 : REV A | Standard Terminology Relating to Hydraulic and Other Inorganic Cements |
| ASTM C 156 : 2020 | Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete |
| ASTM C 567/C567M : 2019 | Standard Test Method for Determining Density of Structural Lightweight Concrete |
| ASTM C 94/C94M : 2020 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 1240 : 2010 | Standard Specification for Silica Fume Used in Cementitious Mixtures |
| ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM C 1611/C1611M : 2021 | Standard Test Method for Slump Flow of Self-Consolidating Concrete |
| ASTM C 94/C94M : 2021 : REV A | Standard Specification for Ready-Mixed Concrete |
| ASTM C 1610/C1610M : 2019 | Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique |
| ASTM E 135 : 2003 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM C 1611/C1611M : 2018 | Standard Test Method for Slump Flow of Self-Consolidating Concrete |
| ASTM E 135 : 2002 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM C 94/C94M : 2021 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 1610/C1610M : 2021 | Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique |
| ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 135 : 2003 : REV C | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM C 494/C494M : 2010 | Standard Specification for Chemical Admixtures for Concrete |
| ASTM E 135 : 2020 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.