ASTM C 1232 : 2009
NA
Status of Standard is Unknown
Standard Terminology of Masonry
Hardcopy , PDF
English
02-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 15
|
| DocumentType |
Reference Material
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
NA
|
| SupersededBy | |
| Supersedes |
1.1 This standard incorporates generic terms and generic definitions of terms specifically associated with masonry and masonry units. These generic terms and definitions are used within the standards developed by Committee C12 on Mortars and Grouts for Unit Masonry and Committee C15 on Manufactured Masonry Units.
1.2 This standard incorporates terms and definitions of terms associated with the standards specific to clay masonry units, in particular to Specifications C 32
1.3 This standard incorporates terms and definitions of terms associated with the standards specific to concrete masonry units in particular to Specifications C 55
1.4 This standard incorporates terms and definition of terms associated with the standards specific to autoclaved aerated concrete masonry units in particular to Practice C 1555
1.5 This standard incorporates terms and definitions of terms associated with the standards specific to clay and concrete roofing tile units in particular to Specifications C 1167
1.6 For terminology specific to mortar and grout, see Terminology C 1180
| ASTM C 1716/C1716M : 2019 | Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms |
| ASTM C 1780 : 2018 : REV A | Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer |
| ASTM C 279 : 2017 | Standard Specification for Chemical-Resistant Masonry Units |
| ASTM C 34 : 2017 | Standard Specification for Structural Clay Loadbearing Wall Tile |
| ASTM C 56 : 2013 : R2017 | Standard Specification for Structural Clay Nonloadbearing Tile |
| ASTM C 1601 : 2014 : REV A | Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces |
| ASTM C 1732 : 2015 | Standard Practice for Installation of Concrete Floor Tiles |
| ASTM C 62 : 2017 | Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) |
| ASTM C 410 : 2013 : R2017 | Standard Specification for Industrial Floor Brick |
| ASTM C 1093 : 2015 : REV A : EDT 1 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 126 : 2018 | Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units |
| ASTM C 1884 : 2018 | Standard Specification for Concrete Ballast Block |
| ASTM C 1314 : 2018 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM E 514/E514M : 2014 : REV A | Standard Test Method for Water Penetration and Leakage Through Masonry |
| ASTM C 426 : 2016 | Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units |
| ASTM E 2266 : 2011 | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM C 902 : 2015 | Standard Specification for Pedestrian and Light Traffic Paving Brick |
| ASTM C 1196 : 2014 : REV A | Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements |
| ASTM C 216 : 2017 : REV A | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) |
| ASTM C 1272 : 2017 | Standard Specification for Heavy Vehicular Paving Brick |
| ASTM C 1088 : 2019 | Standard Specification for Thin Veneer Brick Units Made From Clay or Shale |
| ASTM C 530 : 2013 : R2017 | Standard Specification for Structural Clay Nonloadbearing Screen Tile |
| ASTM C 1491 : 2018 | Standard Specification for Concrete Roof Pavers |
| ASTM C 55 : 2017 | Standard Specification for Concrete Building Brick |
| ASTM C 1781/C1781M : 2018 | Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems |
| ASTM C 1532/C1532M : 2019 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
| ASTM C 744 : 2016 | Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units |
| ASTM C 67/C67M : 2019 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 1405 : 2019 | Standard Specification for Glazed Brick (Single Fired, Brick Units) |
| ASTM E 1857 : 1997 : R2013 : EDT 1 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| ASTM C 1715/C1715M : 2015 | Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems |
| ASTM C 1717 : 2019 | Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels |
| ASTM C 887 : 2019 | Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
| ASTM C 1262/C1262M : 2018 | Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units |
| ASTM C 1372 : 2017 | Standard Specification for Dry-Cast Segmental Retaining Wall Units |
| ASTM C 1670/C1670M : 2018 | Standard Specification for Adhered Manufactured Stone Masonry Veneer Units |
| ASTM C 901 : 2018 | Standard Specification for Prefabricated Masonry Panels |
| ASTM C 1400 : 2011 : R2017 | Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls |
| ASTM C 32 : 2013 : R2017 | Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale) |
| ASTM C 1319 : 2017 | Standard Specification for Concrete Grid Paving Units |
| ASTM C 90 : 2016 : REV A | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 1790 : 2015 | Standard Specification for Fly Ash Facing Brick |
| ASTM C 140/C140M : 2018 : REV A | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 1825 : 2018 : EDT 1 | Standard Guide for Developing Specifications for Masonry Units |
| ASTM C 980 : 2017 | Standard Specification for Industrial Chimney Lining Brick |
| ASTM C 1587/C1587M : 2015 | Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing |
| ASTM C 212 : 2017 | Standard Specification for Structural Clay Facing Tile |
| ASTM C 1791 : 2016 | Standard Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems |
| ASTM C 1691 : 2011 : R2017 | Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units |
| ASTM C 652 : 2019 | Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) |
| ASTM C 1167 : 2011 : R2017 | Standard Specification for Clay Roof Tiles |
| ASTM E 518/E518M : 2015 | Standard Test Methods for Flexural Bond Strength of Masonry |
| ASTM C 129 : 2017 | Standard Specification for Nonloadbearing Concrete Masonry Units |
| ASTM C 73 : 2017 | Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) |
| ASTM C 1072 : 2013 : EDT 1 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1660 : 2010 : R2018 | Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry |
| ASTM C 1180 : 2018 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 139 : 2017 | Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes |
| ASTM C 1261 : 2013 : R2017 : EDT 1 | Standard Specification for Firebox Brick for Residential Fireplaces |
| ASTM C 1531 : 2016 | Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index |
| ASTM C 1731 : 2016 | Standard Specification for Concrete Floor Tile |
| ASTM C 1623 : 2017 : REV A | Standard Specification for Manufactured Concrete Masonry Lintels |
| ASTM C 1634 : 2017 | Standard Specification for Concrete Facing Brick |
| ASTM C 1197 : 2014 : REV A | Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method |
| ASTM C 1006/C1006M : 2019 | Standard Test Method for Splitting Tensile Strength of Masonry Units |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.