ASTM C 1186 : 2022 : EDT 1
Current
The latest, up-to-date edition.
Standard Specification for Flat Fiber-Cement Sheets
Hardcopy , PDF
English
10-10-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 17
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers either untextured or surface textured fiber-cement flat sheets intended for exterior applications such as wall claddings, facades, curtain walls, soffits, and so forth.
1.2This specification is not applicable to asbestos-cement flat sheets (Specification C220), gypsum-based boards (Specifications C1396/C1396M, C1177/C1177M, C1178/C1178M), or particle boards (Terminology D1554) discrete non-asbestos fiber-cement interior substrate sheets (Specification C1288), fiber-mat reinforced non-asbestos cement interior substrate sheets (Specification C1325), or cement-bonded particleboards (Specification BS 5669: Part 4) and (ISO 8335).
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 662 : 2021 : REV A : EDT 1 | Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
| ASTM D 2859 : 2016 : R2021 | Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials |
| ASTM C 1535 : 2005 : R2023 | Standard Practice for Application of Exterior Insulation and Finish Systems Class PI |
| ASTM E 1995 : 2021 | Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally |
| ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 2231 : 2021 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 2404 : 2022 | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
| ASTM E 162 : 2022 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
| ASTM C 1516 : 2005 : R2023 | Standard Practice for Application of Direct-Applied Exterior Finish Systems |
| ASTM C 1841 : 2023 | Standard Specification for Interior Radiation Control Coating (IRCC) for Building Applications |
| ASTM C 1154 : 2023 | Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products |
| ASTM C 1397 : 2013 : R2019 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage |
| ASTM E 648 : 2019 : REV A : EDT 1 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source |
| ASTM C 1185 : 2008 : R2016 : EDT 1 | Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| ASTM E 1740 : 2022 | Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
| ASTM E 2266 : 2022 | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 1325 : 2022 : EDT 1 | Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units |
| ASTM C 1288 : 2023 | Standard Specification for Fiber-Cement Interior Substrate Sheets |
| ASTM C 1154 : 2024 | Standard Terminology for Fiber-Reinforced Cement Products |
| ASTM C 1178/C1178M : 2018 | Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel |
| ASTM C 1185 : 2023 | Standard Test Methods for Sampling and Testing Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| ASTM C 1185 : 2008 : R2016 | Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| ASTM E 84 : 2024 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 1177/C1177M : 2024 | Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
| ASTM C 1396/C1396M : 2017 | Standard Specification for Gypsum Board |
| ASTM C 1177/C1177M : 2017 | Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
| ASTM C 1288 : 2017 : EDT 1 | Standard Specification for Fiber-Cement Interior Substrate Sheets |
| ASTM C 1154 : 2024 : REV A | Standard Terminology for Fiber-Reinforced Cement Products |
| ASTM C 1178/C1178M : 2024 | Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel |
| ASTM C 1396/C1396M : 2024 | Standard Specification for Gypsum Board |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.