ASTM C 1071 : 2019
Current
Current
The latest, up-to-date edition.
Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
03-01-2019
Important note : All end users must be registered with an Account prior to user licenses being assigned.This test method measures cut resistance of garments and devices worn to protect the lower body (legs) when operating a chainsaw.2
| Committee |
C 16
|
| DocumentType |
Standard
|
| Pages |
4
|
| ProductNote |
THIS STANDARD ALSO REFERS TO CAN/ULC-S102, NAIMA, SMACNA.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers fibrous glass insulation used as a thermal and sound absorbing liner for interior surfaces of ducts, plenums, and other air handling equipment that handle air up to 250°F (121°C).
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1534 : 2019 | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1558 : 2019 | Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation |
| ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 168 : 2019 | Standard Terminology Relating to Thermal Insulation |
| ASTM C 177 : 2019 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM C 1114 : 2006 : R2013 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1114 : 2006 : R2019 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1304 : 2008 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM E 2231 : 2002 : EDT 1 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 1304 : 2008 : R2013 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM C 1304 : 2018 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM E 795 : 2016 | Standard Practices for Mounting Test Specimens During Sound Absorption Tests |
| ASTM C 1338 : 2000 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM C 423 : 2017 | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
| ASTM E 2231 : 2014 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 390 : 2008 : R2024 | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
| ASTM C 423 : 2022 | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
| ASTM E 2231 : 2019 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 1114 : 2006 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1338 : 2014 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM E 84 : 2021 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 518 : 2002 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM E 2231 : 2021 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 390 : 2008 : R2019 | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
| ASTM E 84 : 2022 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 2231 : 2007 : REV A | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 168 : 2024 | Standard Terminology Relating to Thermal Insulation |
| ASTM C 1304 : 2023 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM E 2231 : 2002 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 1338 : 2019 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM E 84 : 2024 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 1338 : 2008 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM C 1617 : 2005 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM C 1304 : 1995 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM C 167 : 2022 | Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations |
| ASTM C 1617 : 2018 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM C 1338 : 2019 : R2022 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM E 84 : 2020 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 665 : 2023 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
| ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 2231 : 2009 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 1114 : 2000 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM E 2231 : 2007 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 1617 : 2018 : REV A | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM E 2231 : 2018 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 423 : 2023 | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
| ASTM C 1617 : 2009 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM C 518 : 2017 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 518 : 2021 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 1114 : 2000 : R2006 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 167 : 2018 | Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations |
| ASTM C 177 : 2019 : EDT 1 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM E 795 : 2023 | Standard Practices for Mounting Test Specimens During Sound Absorption Tests |
| ASTM C 167 : 1998 | Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations |
| ASTM C 665 : 2017 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
| ASTM G 21 : 2015 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
| ASTM C 423 : 2023 : EDT 1 | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
| ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM G 21 : 2015 : R2021 : EDT 1 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM E 2231 : 2015 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 1617 : 2019 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM C 1617 : 2024 | Standard Test Method for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Carbon Steel |
| ASTM C 1617 : 2015 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM C 518 : 1998 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.