ASTM C 1036 : 1991 : R1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Flat Glass
Hardcopy , PDF
11-11-2014
English
06-10-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 14
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This specification covers the requirements for annealed, monolithic flat glass of rectangular shape supplied as cut sizes or stock sheets. This specification is applicable for laboratory and field evaluation only to the extent that such evaluation can be carried out in accordance with the test method(s) prescribed herein.
1.2 This specification covers the quality requirements of flat, transparent, clear and tinted glass having glossy, apparently plane and smooth surfaces. The glass is intended to be used primarily for mirrors, coatings, glazing, and general architectural or similar uses.
Note 1—Reflective distortion is not addressed in this specification.Note 2—There may be blemishes or other glass quality requirements that are not addressed in this specification.1.3 This specification covers the quality requirements of patterned or wired glasses intended to be used primarily for decorative and general glazing applications.
1.4 The dimensional values stated in metric units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM C 1322 : 2015 : R2019 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
| ASTM F 3006 : 2019 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
| ASTM E 576 : 2014 | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position |
| ASTM G 24 : 2013 | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
| ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
| ASTM C 1048 : 2018 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM C 1464 : 2016 | Standard Specification for Bent Glass |
| ASTM C 1349 : 2017 | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
| ASTM E 3120 : 2017 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
| ASTM C 1376 : 2015 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM C 1375 : 2000 : R2014 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
| ASTM C 1443 : 1999 : R2016 | Standard Specification for Glasses, Portlight, Circular, Fully Tempered (Withdrawn 2021) |
| ASTM E 2461 : 2012 : R2017 | Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
| ASTM E 2190 : 2019 | Standard Specification for Insulating Glass Unit Performance and Evaluation |
| ASTM F 782 : 2001 : R2012 | Standard Specification for Doors, Furniture, Marine |
| ASTM F 3007 : 2019 | Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass |
| ASTM F 2248 : 2019 | Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass |
| ASTM C 1652/C1652M : 2014 | Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids |
| ASTM C 1503 : 2018 | Standard Specification for Silvered Flat Glass Mirror |
| ASTM C 704/C704M : 2015 : EDT 1 | Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature |
| ASTM C 1651 : 2011 : R2018 | Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass |
| ASTM C 1172 : 2019 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM C 1367 : 2019 | Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
| ASTM C 964 : 2007 : R2012 | Standard Guide for Lock-Strip Gasket Glazing |
| ASTM E 1300 : 2016 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 546 : 2014 | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units |
| ASTM C 1422/C1422M : 2015 | Standard Specification for Chemically Strengthened Flat Glass |
| ASTM E 2751/E2751M : 2017 : REV A | Standard Practice for Design and Performance of Supported Laminated Glass Walkways |
| ASTM E 2188 : 2019 | Standard Test Method for Insulating Glass Unit Performance |
| ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.