ASTM B 6 : 2023
Current
The latest, up-to-date edition.
Standard Specification for Zinc
Hardcopy , PDF
English
04-07-2023
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
B 02
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers zinc metal made from ore or other material by a process of distillation or by electrolysis in five grades as follows:
1.1.1LME Grade
1.1.2Special High Grade
1.1.3High Grade
1.1.4Intermediate Grade
1.1.5Prime Western Grade
Note 1:Certain continuous galvanizing grades are specified in Specification B852. Other continuous galvanizing and controlled lead grades are not included in this specification but are covered by specific user purchasing specifications.
1.2This specification does not cover zinc produced by “sweating” or remelting of secondary zinc.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 586 : 2018 | Standard Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand |
| ASTM A 411 : 2008 : R2022 | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire |
| ASTM A 1079 : 2017 : R2023 | Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| ASTM B 957/B957M : 2022 | Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors |
| ASTM B 960 : 2018 : R2022 | Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc |
| ASTM A 603 : 2019 | Standard Specification for Metallic-Coated Steel Structural Wire Rope |
| ASTM B 498/B498M : 2022 | Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM F 1043 : 2018 : R2022 | Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework |
| ASTM A 390 : 2006 : R2021 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM A 53/A53M : 2022 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM B 418 : 2016 : REV A : R2021 | Standard Specification for Cast and Wrought Galvanic Zinc Anodes |
| ASTM A 1094/A1094M : 2020 | Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement |
| ASTM A 1007 : 2022 | Standard Specification for Carbon Steel Wire for Wire Rope |
| ASTM A 641/A641M : 2019 | Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire |
| ASTM A 459 : 2008 : R2020 | Standard Specification for Zinc-Coated Flat Steel Armoring Tape |
| ASTM B 897 : 2018 | Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot |
| ASTM B 252 : 1992 : R2020 | Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings |
| ASTM A 740 : 2021 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM B 914 : 2021 | Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel |
| ASTM A 392 : 2011 : REV A : R2022 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM A 1063/A1063M : 2022 | Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process |
| ASTM A 865/A865M : 2006 : R2017 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| ASTM A 817 : 2012 : R2017 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
| ASTM A 640 : 1997 : R2019 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable |
| ASTM A 761/A761M : 2018 | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM F 1083 : 2018 : R2022 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
| ASTM A 787/A787M : 2022 | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
| ASTM A 475 : 2022 | Standard Specification for Metallic-Coated Steel Wire Strand |
| ASTM A 653/A653M : 2022 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| ASTM A 1060/A1060M : 2022 | Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete |
| ASTM A 123/A123M : 2017 | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM B 327 : 2021 | Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys |
| ASTM A 764 : 2007 : R2021 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM A 741 : 2011 : R2016 | Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail |
| ASTM A 111 : 1999 : REV A : R2020 | Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire |
| ASTM A 767/A767M : 2019 | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
| ASTM A 795/A795M : 2021 | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
| ASTM A 854/A854M : 2008 : R2022 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM B 606/B606M : 2022 | Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM A 363 : 2003 : R2020 : EDT 1 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
| ASTM A 153/A153M : 2016 : REV A | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
| ASTM B 949 : 2018 | Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
| ASTM G 92 : 2020 | Standard Practice for Characterization of Atmospheric Test Sites |
| ASTM A 810 : 2001 : R2019 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
| ASTM B 897 : 2023 | Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot |
| ASTM B 949 : 2023 | Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
| ASTM B 949 : 2018 | Standard Specification for General Requirements for Zinc and Zinc Alloy Products |
| ASTM E 527 : 2023 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM E 536 : 2016 | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
| ASTM E 536 : 2023 | Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys |
| ASTM E 527 : 2016 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM B 897 : 2018 | Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.