ASTM B 246 : 2015 : REDLINE
Current
The latest, up-to-date edition.
Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
English
04-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 02.03, 2017 Specifies tinned hard-drawn and medium-hard-drawn round copper wire for electrical purposes.
| Committee |
B 01
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This specification covers tinned hard-drawn and medium-hard-drawn round copper wire for electrical purposes.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.2.1Exception—For density, resistivity and temperature, the values stated in SI units are to be regarded as standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For hazard statement, see Sections 10 and 13.
| ASTM B 866 : 1995 : R2008 | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| MIL W 83420 : E | WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL |
| ASTM B 787/B787M : 2004 | Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation |
| I.S. EN ISO 10308:2006 | METALLIC COATINGS - REVIEW OF POROSITY TESTS |
| WC 3-1992 | RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY |
| ASTM B 866 : 1995 : R2003 | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| MIL W 87161 : 0 | WIRE STRAND, NONFLEXIBLE, FOR AIRCRAFT CONTROL |
| ASTM B 8 : 2011 | Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
| ASTM B 8 : 2011 : R2017 | Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft |
| MIL-HDBK-270 Revision A:1991 | METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| ASTM B 866 : 1995 | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| ASTM B 866 : 1995 : R2018 | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| QQ-W-343 Revision G:1997 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| ASTM B 866 : 1995 : R2013 | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| ASTM B 787/B787M : 2004 : R2009 | Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation |
| ASTM B 605 : 1995 : REV A : R1999 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| EN ISO 10308:2006 | Metallic coatings - Review of porosity tests (ISO 10308:2006) |
| ASTM B 605 : 1995 : REV A : R2004 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 787/B787M : 2004 : R2014 | Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation |
| ASTM B 605 : 1995 : REV A : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| ASTM B 605 : 1995 : REV A : R2009 | Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy |
| DIN EN ISO 10308:2006-04 | METALLIC COATINGS - REVIEW OF POROSITY TESTS |
| BS EN ISO 10308:2006 | Metallic coatings. Review of porosity tests |
| ISO 10308:2006 | Metallic coatings Review of porosity tests |
| ASTM B 49 : 2017 : REDLINE | Standard Specification for Copper Rod for Electrical Purposes |
| ASTM B 5 : 2016 : REDLINE | Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes |
| ASTM B 193 : 2016 : REDLINE | Standard Test Method for Resistivity of Electrical Conductor Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.