ASTM B 243 : 2020
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology of Powder Metallurgy
Available format(s)
Hardcopy , PDF
Superseded date
06-21-2023
Superseded by
Language(s)
English
Published date
12-04-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
B 09
|
| DocumentType |
Reference Material
|
| Pages |
10
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This terminology standard includes definitions that are helpful in the interpretation and application of powder metallurgy terms.
1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM B 821 : 2010 : R2016 | Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis |
| ASTM B 417 : 2018 | Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel |
| ASTM B 988 : 2018 | Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components |
| ASTM B 886 : 2019 | Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides |
| ASTM B 883 : 2019 | Standard Specification for Metal Injection Molded (MIM) Materials |
| ASTM B 610 : 2019 | Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction |
| ASTM B 783 : 2019 | Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts |
| ASTM B 795 : 2020 | Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials |
| ASTM B 823 : 2020 | Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts |
| ASTM B 213 : 2020 | Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel |
| ASTM B 312 : 2020 | Standard Test Method for Green Strength of Specimens Compacted from Metal Powders |
| ASTM B 922 : 2020 | Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption |
| ASTM B 329 : 2020 | Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter |
| ASTM B 931 : 2014 : R2018 : EDT 1 | Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts |
| ASTM B 887 : 2012 : R2019 | Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides |
| ASTM B 933 : 2020 | Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials |
| ASTM B 331 : 2020 | Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction |
| ASTM B 822 : 2020 | Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering |
| ASTM B 528 : 2016 : R2020 : EDT 1 | Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens |
| ASTM B 895 : 2016 : R2020 : EDT 1 | Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution |
| ASTM B 330 : 2020 | Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability |
| ASTM B 935 : 2020 | Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (PM) Materials |
| ASTM B 215 : 2020 | Standard Practices for Sampling Metal Powders |
| ASTM B 939 : 2021 | Standard Test Method for Radial Crushing Strength, <emph type="bdit">K</emph>, of Powder Metallurgy (PM) Bearings and Structural Materials |
| ASTM B 439 : 2021 | Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) |
| ASTM B 438 : 2021 | Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) |
| ASTM B 595 : 2021 | Standard Specification for Materials for Aluminum Powder Metallurgy (PM) Structural Parts |
| ASTM B 859 : 2021 | Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis |
| ASTM B 923 : 2021 | Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry |
| ASTM B 934 : 2021 | Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements |
| ASTM B 873 : 2021 | Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417 |
| ASTM B 212 : 2021 | Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel |
| ASTM B 703 : 2021 | Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter |
| ASTM B 848/B848M : 2021 | Standard Specification for Powder Forged (PF) Ferrous Materials |
| ASTM B 853 : 2016 : R2021 : EDT 1 | Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components |
| ASTM B 930 : 2003 : R2021 | Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals) |
| ASTM C 753 : 2016 : REV A : R2021 | Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder |
| ASTM F 3001 : 2014 : R2021 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ASTM F 3056 : 2014 : R2021 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 3055 : 2014 : REV A : R2021 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM C 757 : 2016 : R2021 | Standard Specification for Nuclear-Grade Plutonium Dioxide Powder for Light Water Reactors |
| ASTM F 3049 : 2014 : R2021 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
| ASTM F 2924 : 2014 : R2021 | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 2989 : 2021 | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
| ASTM B 276 : 2021 | Standard Test Method for Apparent Porosity in Cemented Carbides |
| ASTM B 214 : 2016 | Standard Test Method for Sieve Analysis of Metal Powders |
| ASTM B 311 : 2017 | Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity |
| ASTM B 855 : 2017 | Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel |
| ASTM B 962 : 2017 | Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
| ASTM B 963 : 2017 | Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
| ASTM B 964 : 2016 | Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel |
| ASTM C 833 : 2017 | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors |
| ASTM E 159 : 2017 | Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss) |
| ASTM F 2886 : 2017 | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
| ASTM F 2885 : 2017 | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.