ASTM B 221 : 2014 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
Available format(s)
PDF
Superseded date
01-22-2021
Superseded by
Language(s)
English
Published date
10-20-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 02.02, 2014 Describes aluminum and aluminum-alloy extruded bars, rods, wire, profiles, and tubes in the aluminum alloys and tempers.
| Committee |
B 07
|
| DevelopmentNote |
Supersedes ASTM B 235 and ASTM B 273. (01/2002) Supersedes QQ A 200/1, QQ A 200/2, QQ A 200/3, QQ A 200/4, QQ A 200/5, QQ A 200/6, QQ A 200/7, QQ A 200/8, QQ A 200/9, QQ A 200/11, QQ A 200/13, QQ A 200/14, QQ A 200/17 and QQ A 200/10. (12/2002) Supersedes QQ A 200. (01/2003) Supersedes MIL A 12545 and MIL A 46104. (05/2004) Supersedes SAE AMS QQ A 200/1, SAE AMS QQ A 200/10, SAE AMS QQ A 200/16 and SAE AMS QQ A 200/17. (07/2007) Supersedes SAE AMS QQ A 200/9. (09/2007)
|
| DocumentType |
Redline
|
| Pages |
18
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
|
1.1This specification2 covers aluminum and aluminum-alloy extruded bars, rods, wire, profiles, and tubes in the aluminum alloys (Note 1) and tempers shown in Table 2.
Note 1:Throughout this specification, the use of the term alloy in the general sense includes aluminum as well as aluminum alloy.
Note 2:For rolled or cold-finished bar and rod refer to Specification B211, for drawn seamless tube used in pressure applications, Specification B210, for structural pipe and tube, Specification B429/B429M, and for seamless pipe and tube used in pressure applications, Specification B241/B241M.
Note 3:Pipe and tube products listed in this specification are intended for general purpose applications. This specification may not address the manufacturing processes, integrity testing, and verification required for fluid-carrying applications involving pressure. See Specifications B210 or B241/B241M, or both as appropriate, for seamless pipe and tube used in fluid-carrying applications involving pressure. See Specification B234, as appropriate, for use in surface condensers, evaporators, and heat exchangers.
1.2Alloy and temper designations are in accordance with ANSI H35.1/H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9; for example, A91100 for Aluminum 1100 in accordance with Practice E527.
1.3For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.
1.4A complete metric companion to Specification B221 has been developed—Specification B221M; therefore, no metric equivalents are presented in this specification.
| Standards | Relationship |
| UNE 38119:2004 | Identical |
| ASTM F 985 : 2000 : R2012 | Standard Specification for Panama Canal Pilot Platform |
| MIL I 24728 : A | INTERCONNECTION BOX, FIBER OPTIC, METRIC, GENERAL SPECIFICATION FOR |
| ASTM B 247M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| ASTM F 826 : 1994 : R2010 | Standard Specification for Tops, Furniture, Marine, Steel |
| ASTM B 881 : 2017 : REDLINE | Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products |
| UFC 4-022-03 : 2013 | UNIFIED FACILITIES CRITERIA - SECURITY FENCES AND GATES |
| ASTM B 211 : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| MIL F 52618/9 : A | FITTINGS, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND: GENERAL SPECIFICATION FOR |
| API 2CCU : 2017 | OFFSHORE CARGO CARRYING UNITS |
| MIL-DTL-3922 Revision E:2016 | FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
| ASTM D 3115 : 1995 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
| MIL-R-52255 Revision D:1988 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS |
| ASTM F 985 : 2000 | Standard Specification for Panama Canal Pilot Platform |
| ASTM C 1802 : 2014 : EDT 1 | Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref > |
| ASTM F 1333 : 1991 : R2013 | Standard Specification for Construction of Fire and Foam Station Cabinets |
| MIL-DTL-39030 Revision F:2014 | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| SCTE 15 : 2016 | SPECIFICATION FOR TRUNK, FEEDER AND DISTRIBUTION COAXIAL CABLE |
| ASTM B 928/B928M : 2015 : REDLINE | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| ASTM F 824 : 1993 : R1999 | Standard Specification for Tables, Mess, Marine, Steel |
| ASTM D 3115 : 1995 : R2000 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
| ASTM D 3115 : 1995 : R2009 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM C 1802 : 2014 | Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref > |
| ASTM F 782 : 2001 : R2012 | Standard Specification for Doors, Furniture, Marine |
| SAE AMS STD 2154 : 2017-05 | INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR |
| ASTM F 1718 : 2001 : R2013 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM B 316/B316M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| SAE AS 95234A : 2020 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| MIL-DTL-24728-10 Base Document:2010 | INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1017 MM |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL PRF 83513 : D | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL-P-53065 Base Document:1986 | PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-PRF-32107 Base Document:2002 | Hose, Air Duct, General Specification for |
| MIL-DTL-28754-62 Revision A:2016 | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER, CROSSOVER, CONTACT TAILS ON .050 CENTERS |
| MIL-DTL-24728-9 Base Document:2010 | INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1372 MM |
| MIL-DTL-24694 Revision A:2011 | VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-DTL-16036 Revision M:2013 | SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD |
| MIL-STD-2003-4 Revision A:2009 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLEWAYS) |
| A-A-59590 Revision D:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL DTL 28754/60 : A | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS |
| MIL-DTL-28754-59 Revision A:2016 | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE) |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| A-A-59789 Revision B:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-2726 Revision C:2006 | Receptacle, Receptacle Plugs, Switch and Receptacles, and Outlets (Electrical), General Specification for |
| MIL-DTL-28840-25 Revision D:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, METAL CONDUIT FOR EMI SHIELDING |
| 14/30291911 DC : 0 | BS ISO 6362-2 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED RODS/BARS, TUBES AND PROFILES - PART 2: MECHANICAL PROPERTIES |
| MIL-DTL-28840-30 Revision D:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, METAL CONDUIT COUPLING |
| MIL-DTL-24800 Base Document:1996 | CLEANING COMPOUND - AQUEOUS - OXYGEN SYSTEMS COMPONENTS |
| MIL-DTL-39000 Revision C:2013 | Flanges, Waveguide, Ridge, General Specification for |
| MIL F 39000 : A | FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| MIL-DTL-28840-23 Revision D:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, GLAND NUT, WIRING |
| MIL S 16036 : K | SWITCHGEAR, POWER, NAVAL SHIPBOARD |
| A-A-59950 Base Document:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-22442-25 Revision B:1998 | Assembly, Aircraft Audio, Molded Rubber Connector Mechanical Gauges |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| AASHTO LRFDLTS 1 : 1900 | LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS |
| MIL-PRF-12732 Revision F:2010 | HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW |
| MIL-DTL-83833 Revision B:2014 | 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER |
| MIL-DTL-24705 Revision B:2010 | PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR |
| MIL-DTL-83833 Revision C:2017 | 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER |
| ASTM D 3115 : 1995 : R2005 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| MIL-PRF-24755 Revision B:2010 | Fans, Vaneaxial, High Pressure, Naval Shipboard |
| SAE AIR 5919 : 2017 | ALTERNATIVES TO CADMIUM PLATING |
| ASTM C 1861 : 2017 | Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster |
| AWS D1.2/D1.2M : 2014 | STRUCTURAL WELDING CODE - ALUMINUM |
| ASTM B 234 : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| ASTM F 537 : 2001 | Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials |
| ASTM F 1333 : 1991 : R2007 | Standard Specification for Construction of Fire and Foam Station Cabinets |
| ASTM B 211 : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| DSCC 84103 : J | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 3-PIECE, SCREW ACTUATED |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME B31.3:2016 | PROCESS PIPING |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL-DTL-82762 Revision B:2004 | CUTTER, DELAY, PROPELLANT ACTUATED, MLU-58/B |
| AASHTO M 181 :2010 | SPECIFICATION FOR CHAIN-LINK FENCE |
| MIL C 24356 : A | COUPLING, SEGMENTED AND SPLIT CLAMPS REATTACHABLE, 2-1/2-, 4-, 6- AND 7- INCH, FOR REFUELING-AT-SEA HOSE |
| MIL-DTL-15370 Revision K:2015 | COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR |
| ASTM B 234M : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
| A-A-59473 Base Document:1999 | Curtain, Track, and Suspension System, Berth (Naval Shipboard) |
| MIL-DTL-3954 Revision D:2015 | DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR |
| WW-C-621 Revision G:1990 | COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER OR FABRIC-LINED AND UNLINED) |
| BS ISO 6362-2:2014 | Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles Mechanical properties |
| MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-28840-15 Revision E:2013 | CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, PLUG |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| MIL STD 1693 : A NOTICE 2 | FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES |
| MIL-DTL-28840-8 Revision F:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, CABLE SEALING AND SHIELD TERMINATION |
| MIL-DTL-24211 Revision D:2016 | GASKETS, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR |
| MIL-M-24144 Revision D:1988 | Monitors, Frost-Point/Dew-Point, Compressed Air, Semi-Portable (Future Acquisitions for this item may Refer to ST000-AG-IDX-010) |
| DSCC 84191 : K | EXTRACTOR, ELECTRICAL CARD, METAL |
| AWWA C562 : 2014 | FABRICATED ALUMINUM SLIDE GATES |
| ASTM F 824 : 1993 : R2010 | Standard Specification for Tables, Mess, Marine, Steel |
| ASTM D 3115 : 1995 : R2014 | Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear (Withdrawn 2019) |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM F 1718 : 2001 : R2006 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 985 : 2000 : R2006 | Standard Specification for Panama Canal Pilot Platform |
| ASTM F 824 : 1993 : R2017 | Standard Specification for Tables, Mess, Marine, Steel |
| NASA KSC SPEC F 0009 : 1988 | DESIGN, FABRICATION, AND ERECTION OF SIGNS AT JOHN F. KENNEDY SPACE CENTER, SPECIFICATION FOR |
| A-A-59832 Revision B:2016 | EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR |
| MIL C 22931 : B | CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| AASHTO M 181 : 2010 : R2015 | SPECIFICATION FOR CHAIN-LINK FENCE |
| SAE AMS 3266 : 2017 | SEALING COMPOUND, POLYTHIOETHER ELASTOMERIC TWO-PART ELECTRICALLY CONDUCTIVE |
| MIL-HDBK-270 Revision A:1991 | METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC) |
| A-A-59812 Revision A:2015 | HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, MULTIPLE PIECE, GENERAL REQUIREMENTS FOR |
| MIL-DTL-28840-3 Revision F:2013 | CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 45 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS |
| MIL-DTL-28754-13 Revision D:2014 | Connectors, Electrical, Modular, Connector Assembly, Type IV, Single Span (without Guide Ribs) |
| MIL-L-12197 Revision F:1993 | LADDER, FIRE, EXTENSION, LADDERS, FIRE, SINGLE, AND LADDERS, FIRE, A-FOLDING EXTENSION |
| MIL-DTL-52618 Revision F:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, GENERAL SPECIFICATION FOR |
| MIL-DTL-22931 Revision D:2013 | CABLES, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-83413-7 Revision F:2015 | Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Aluminum Clip, Electrical |
| MIL H 24565 : 0 | HOSE AND FITTINGS, OIL AND TURBINE FUEL, SMOOTH BORE, CORRUGATED COVER, 7 INCH |
| MIL-A-17204 Revision D:1982 | ADAPTERS, STRAIGHT OR REDUCING, PIPE THREAD TO HOSE THREAD |
| MIL-DTL-25995 Revision E:2014 | PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED |
| ACI 362.1R : 2012 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF DURABLE CONCRETE PARKING STRUCTURES |
| ASTM F 1184 : 2016 : REDLINE | Standard Specification for Industrial and Commercial Horizontal Slide Gates |
| MIL-DTL-28840-1 Revision F:2013 | CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, STRAIGHT, OPEN, FOR ELECTRICAL CONNECTORS |
| ASTM F 1333 : 1991 : R2002 | Standard Specification for Construction of Fire and Foam Station Cabinets |
| MIL-DTL-24788 Revision B:2017 | Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch |
| MIL-DTL-28840-2 Revision F:2013 | CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 90 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS |
| ASTM F 537 : 2001 : R2014 | Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials |
| ASTM F 826 : 1994 : R1999 | Standard Specification for Tops, Furniture, Marine, Steel |
| SAE J 457 : 2017 | CHEMICAL COMPOSITIONS, MECHANICAL PROPERTY LIMITS, AND DIMENSIONAL TOLERANCES OF SAE WROUGHT ALUMINUM ALLOYS |
| API 620 CHINESE : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| ISO 6362-2:2014 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| API 620 REDLINE : 2008 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| ASTM F 1333 : 1991 | SPECIFICATION FOR CONSTRUCTION OF FIRE AND FOAM STATION CABINETS |
| ASTM B 361 : 2016 : REDLINE | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
| ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
| ASTM B 745/B745M : 2015 : REDLINE | Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains |
| ASTM F 1333 : 1991 : R1996 : EDT 1 | Standard Specification for Construction of Fire and Foam Station Cabinets |
| MIL-DTL-28754-61 Revision A:2016 | Connectors, Electrical, Modular, Type IV, Connector, 100 Pin, Center, Crossover, Contact Tails on .100 Centers (Ceramic Compatible) |
| MIL-A-52019 Revision C:1991 | ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE |
| MIL-B-13157 Revision C:1980 | BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM |
| ASTM F 782 : 2001 : R2007 | Standard Specification for Doors, Furniture, Marine |
| MIL-DTL-28840-5 Revision D:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, METAL CONDUIT FOR EMI SHIELDING |
| ASTM F 782 : 2001 | Standard Specification for Doors, Furniture, Marine |
| MIL-DTL-24728-11 Base Document:2010 | INTERCONNECTING BOX, FIBER OPTIC, SPLICE TRAY HOLDER MODULE, 8 TRAY |
| MIL-DTL-22342 Revision E:1995 | BROWS, ALUMINIUM, BEAM AND TRUSS |
| RR-F-191-3 Revision E:2006 | Fencing, Wire and Post, Metal (Chain-Link Fence Posts, Top Rails and Braces) |
| A-A-2622 Revision A:1998 | ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING |
| AWWA C513 : 2005 | OPEN-CHANNEL, FABRICATED-METAL SLIDE GATES AND OPEN-CHANNEL, FABRICATED-METAL WEIR GATES |
| MIL G 24211 : 0 | GASKET, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR |
| MIL F 52618 : D | FITTING, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND, GENERAL SPECIFICATION FOR |
| AA-S-130 Revision B:1991 | SCREENS, BEDSIDE, ALUMINUM |
| ASTM B 253 : 2011 : R2017 | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| MIL-DTL-28840-9 Revision G:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, CABLE SEALING AND SHIELD TERMINATION |
| MIL-DTL-43695 Revision C:2000 | FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE |
| MIL P 24705 : A | PENETRATORS, MULTIPLE CABLE, FOR ELECTRICAL CABLES, GENERAL SPECIFICATION FOR |
| MIL-DTL-28840-13 Revision F:2013 | CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, RECEPTACLE |
| MIL-DTL-28840-27 Revision D:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, METAL CONDUIT FOR EMI SHIELDING |
| MIL-DTL-28840-6 Revision E:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, CABLE SEALING AND SHIELD TERMINATION |
| MIL-DTL-24356 Revision B:2017 | Couplings and Split Clamps, 2½-, 4-, 6-, and 7-Inch Segmented, Reattachable, for Refueling-At-Sea Hose |
| A-A-59934 Base Document:2013 | Sleeve, Swaging-Wire Rope, Aluminum |
| SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| ASTM B 253 : 2011 | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| AWS D3.7 : 2004 | GUIDE FOR ALUMINUM HULL WELDING |
| ASTM F 1718 : 2001 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| SAE AIR 4789 : 2016 | AEROSPACE INFORMATION REPORT ON EVALUATING CORROSION TESTING OF ELECTRICAL CONNECTORS AND ACCESSORIES FOR THE PURPOSE OF QUALIFICATION |
| SAE AS 95234 : 2014 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| ASTM F 826 : 1994 : R2004 | Standard Specification for Tops, Furniture, Marine, Steel |
| ASTM F 537 : 2001 : R2007 | Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials |
| ASTM F 824 : 1993 : R2004 | Standard Specification for Tables, Mess, Marine, Steel |
| ASTM B 746/B746M : 2016 : REDLINE | Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM F 826 : 1994 : R2017 | Standard Specification for Tops, Furniture, Marine, Steel |
| DSCC 89064 : G | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 5-PIECE, .225 INCH BY .225 INCH AND .225 INCH BY .260 INCH BODY SIZE |
| ASME STS 1 : 2011 | Steel Stacks (STS-1 - 2011) |
| DSCC 89024 : E | HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 5-PIECE, .250 INCH BY .260 INCH BODY SIZE |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| PIP ARS13120 : 2014 | PRE-ENGINEERED METAL BUILDINGS SPECIFICATION |
| ANSI H35.2 : 2017 | DIMENSIONAL TOLERANCES FOR ALUMINUM MILL PRODUCTS |
| ASTM B 807/B807M : 2013 : REDLINE | Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys |
| ANSI H35.1/H35.1M : 2017 | ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM B 234 : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| ASTM B 918 : 2001 | Standard Practice for Heat Treatment of Wrought Aluminum Alloys |
| ASTM E 607 : 2002 | Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere |
| ASTM B 666/B666M : 2015 : REDLINE | Standard Practice for Identification Marking of Aluminum and Magnesium Products |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| ASTM B 557 : 2015 : REDLINE | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
| SAE AMS 2772 : 2016 | HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS |
| ASTM E 716 : 2016 : REDLINE | Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry |
| ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
| ASTM B 660 : 2015 : REDLINE | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.