ASTM A 941 : 2024 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
Available format(s)
Hardcopy , PDF
Superseded date
11-12-2024
Superseded by
Language(s)
English
Published date
08-15-2024
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
A 01
|
| DocumentType |
Reference Material
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This standard is a compilation of definitions of terms related to steel, stainless steel, related alloys, and ferroalloys.
1.2When a term is used in an ASTM document for which Committee A01 is responsible, it is included herein only when judged, after review by Subcommittee A01.92, to be a generally usable term.
1.3Some definitions include a discussion section, which is a mandatory part of the definition and contains additional information that is relevant to the meaning of the defined term.
1.4Definitions of terms specific to a particular standard will appear in that standard and will supersede any definitions of identical terms in this standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 6/A6M : 2024 : REV B | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
| ASTM A 370 : 2024 : REV A | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 994 : 2024 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys |
| ASTM A 679/A679M : 2024 | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn |
| ASTM A 229/A229M : 2024 | Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs |
| ASTM A 473 : 2024 : REV A | Standard Specification for Stainless Steel Forgings |
| ASTM A 1015 : 2001 : R2024 | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
| ASTM A 1003/A1003M : 2023 : EDT 1 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
| ASTM A 960/A960M : 2024 : REV A | Standard Specification for Common Requirements for Wrought Steel Piping Fittings |
| ASTM A 125 : 2024 | Standard Specification for Steel Springs, Helical, Heat-Treated |
| ASTM A 312/A312M : 2024 : REV B | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A 322 : 2024 | Standard Specification for Steel Bars, Alloy, Standard Grades |
| ASTM A 434/A434M : 2024 | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered |
| ASTM A 231/A231M : 2024 | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire |
| ASTM A 401/A401M : 2024 | Standard Specification for Steel Wire, Chromium-Silicon Alloy |
| ASTM A 788/A788M : 2024 : REV A | Standard Specification for Steel Forgings, General Requirements |
| ASTM A 232/A232M : 2024 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| ASTM A 484/A484M : 2024 : REV B | Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings |
| ASTM A 961/A961M : 2024 : REV A | Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications |
| ASTM A 450/A450M : 2024 | Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes |
| ASTM A 834 : 2024 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM B 924 : 2002 : R2022 | Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM A 232/A232M : 2018 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| ASTM A 1010/A1010M : 2024 | Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip |
| ASTM A 227/A227M : 2024 | Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs |
| ASTM A 679/A679M : 2017 | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn |
| ASTM A 230/A230M : 2019 | Standard Specification for Steel Wire, Carbon Valve Spring Quality |
| ASTM A 666/A666M : 2024 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| ASTM A 1085/A1085M : 2022 | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| ASTM E 1077 : 2014 : R2021 | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM A 381/A381M : 2023 | Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems |
| ASTM A 134/A134M : 2019 | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) |
| ASTM A 450/A450M : 2023 | Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes |
| ASTM A 312/A312M : 2024 : REV A | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A 480/A480M : 2024 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| ASTM A 1007 : 2022 | Standard Specification for Carbon Steel Wire for Wire Rope |
| ASTM A 530/A530M : 2018 | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe |
| ASTM A 865/A865M : 2023 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
| ASTM A 749/A749M : 2014 : R2021 | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| ASTM A 800/A800M : 2020 | Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite |
| ASTM A 400 : 2023 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
| ASTM A 358/A358M : 2024 | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| ASTM E 3199 : 2022 : REV A | Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment |
| ASTM A 962/A962M : 2024 | Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range |
| ASTM A 6/A6M : 2024 : REV A | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
| ASTM A 1040 : 2017 : R2022 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels |
| ASTM A 790/A790M : 2024 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
| ASTM A 555/A555M : 2023 | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM A 1097/A1097M : 2022 | Standard Specification for Steel Casing Pipe, Carbon, Electric-Fusion (Arc)-Welded (NPS 10 and Larger) |
| ASTM A 663/A663M : 2023 | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
| ASTM A 426/A426M : 2018 | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
| ASTM A 1016/A1016M : 2024 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
| ASTM A 407 : 2023 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
| ASTM A 229/A229M : 2018 | Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs |
| ASTM A 788/A788M : 2024 | Standard Specification for Steel Forgings, General Requirements |
| ASTM A 1053/A1053M : 2012 : R2022 | Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe |
| ASTM A 751 : 2021 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM A 1012 : 2010 : R2021 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins |
| ASTM A 498/A498M : 2017 : R2023 | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins |
| ASTM A 587 : 2022 | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
| ASTM A 786/A786M : 2015 : R2021 | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
| ASTM A 135/A135M : 2021 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 554 : 2021 | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| ASTM A 1099/A1099M : 2020 | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels |
| ASTM A 803/A803M : 2016 : R2021 | Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes |
| ASTM A 213/A213M : 2024 | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| ASTM A 391/A391M : 2021 | Standard Specification for Grade 80 Alloy Steel Chain |
| ASTM A 1088 : 2013(R2019) | Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP) |
| ASTM A 501/A501M : 2021 | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| ASTM A 571/A571M : 2001 : R2023 : EDT 1 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM A 1000/A1000M : 2017 : R2023 | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
| ASTM A 356/A356M : 2021 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
| ASTM A 576 : 2023 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality |
| ASTM A 648 : 2018 | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe |
| ASTM A 512/A512M : 2024 | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
| ASTM A 192/A192M : 2024 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
| ASTM A 519/A519M : 2024 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 988/A988M : 2023 | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| ASTM A 1069/A1069M : 2023 | Standard Specification for Stainless Steel Laser and Laser Hybrid Welded Bars, Plates, Sharp-Cornered Profile (SCP), and Built-up Shapes |
| ASTM A 228/A228M : 2018 : R2024 : EDT 1 | Standard Specification for Steel Wire, Music Spring Quality |
| ASTM A 1112/A1112M : 2018 | Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes |
| ASTM A 472/A472M : 2023 | Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
| ASTM A 414/A414M : 2024 | Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels |
| ASTM A 688/A688M : 2024 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| ASTM A 413/A413M : 2021 | Standard Specification for Carbon Steel Chain |
| ASTM A 799/A799M : 2010 : R2020 | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content |
| ASTM A 1110/A1110M : 2021 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements |
| ASTM A 1003/A1003M : 2023 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
| ASTM A 1120/A1120M : 2021 | Standard Specification for Electric-Resistance-Welded Carbon Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes with Textured Surface |
| ASTM A 1117 : 2023 | Standard Practice for Application of Thermal Spray Aluminum (TSA) Coating to Carbon Steel Pipe |
| ASTM A 684/A684M : 2017 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| ASTM A 568/A568M : 2019 : REV A | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ASTM A 1039/A1039M : 2020 | Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process |
| ASTM A 732/A732M : 2020 | Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
| ASTM A 109/A109M : 2024 | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM A 1127/A1127M : 2023 | Standard Specification for Stainless Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP) or Built-Up Rounded Corner Square, Rectangular, and Special Shape Structural Tube |
| ASTM A 1008/A1008M : 2024 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
| ASTM A 252/A252M : 2019 | Standard Specification for Welded and Seamless Steel Pipe Piles |
| ASTM A 1018/A1018M : 2023 : REV A | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
| ASTM A 957/A957M : 2021 | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
| ASTM A 424/A424M : 2018 | Standard Specification for Steel, Sheet, for Porcelain Enameling |
| ASTM A 507 : 2016 : R2021 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| ASTM A 1125/A1125M : 2024 | Standard Specification for Wire Rod for Bridge Cable Wire |
| ASTM A 989/A989M : 2023 | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| ASTM A 618/A618M : 2021 | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
| ASTM A 703/A703M : 2020 : REV A | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts |
| ASTM A 1100 : 2016 : R2022 | Standard Guide for Qualification and Control of Induction Heat Treating |
| ASTM A 231/A231M : 2018 | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire |
| ASTM A 1083/A1083M : 2023 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process |
| ASTM A 401/A401M : 2018 | Standard Specification for Steel Wire, Chromium-Silicon Alloy |
| ASTM A 20/A20M : 2020 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| ASTM A 500/A500M : 2023 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 973/A973M : 2021 | Standard Specification for Grade 100 Alloy Steel Chain |
| ASTM A 635/A635M : 2022 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
| ASTM A 370 : 2024 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 999/A999M : 2023 | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
| ASTM A 1024/A1024M : 2018 | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
| ASTM A 1011/A1011M : 2023 | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
| ASTM A 778/A778M : 2024 : REV A | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| ASTM A 713 : 2024 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM A 581/A581M : 2022 : REV A | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
| ASTM A 878/A878M : 2019 : R2024 | Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality |
| ASTM A 484/A484M : 2024 : REV A | Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings |
| ASTM A 1098/A1098M : 2018 : R2022 | Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s) |
| ASTM A 955/A955M : 2020 : REV C | Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement |
| ASTM A 781/A781M : 2021 | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
| ASTM A 928/A928M : 2014 : R2021 | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
| ASTM A 1123/A1123M : 2022 | Standard Specification for Carbon Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP), Built-Up, Square, Rectangular, and Special Shape Tube |
| ASTM A 985/A985M : 2021 | Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts |
| ASTM A 513/A513M : 2024 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.