ASTM A 675/A675M : 2014 : REDLINE
Current
The latest, up-to-date edition.
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
English
05-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 01.05, 2017 Defines hot-wrought special quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for general constructional applications.
| Committee |
A 01
|
| DevelopmentNote |
Supersedes ASTM A 675. (05/2009)
|
| DocumentType |
Redline
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This specification2 covers hot-wrought special quality carbon steel bars and bar size shapes produced to mechanical property requirements and intended for general constructional applications.
1.2The bars are available in nine strength grades designated 45, 50, 55, 60, 65, 70, 75, 80, and 90 [310, 345, 380, 415, 450, 485, 515, 550, and 620] corresponding to the minimum ultimate tensile strength in ksi [MPa]. The chemical composition is selected by the manufacturer to develop the required mechanical properties.
1.3Hot-wrought special quality carbon steel bars subject to mechanical property requirements are hot wrought in straight lengths only. Sections and sizes available are covered in Specification A29/A29M.
1.4Some applications may require one or more of the available designations shown under Supplementary Requirements.
1.5The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
| ASTM A 663/A663M : 2017 : REDLINE | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
| ASTM A 400 : 2017 : REDLINE | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
| IFI 136 : 2006 | STUDS AND BENT BOLTS |
| MIL-DTL-18030 Revision F:2018 | Valves, Control, Air-Diaphragm-Operated (Complete with Pneumatic Instrumentation) |
| ASTM C 361M : 2016 : REDLINE | SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE [METRIC] |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MIL-PRF-32407 Revision A:2016 | MOUNTS, RESILIENT (SURFACE SHIP APPLICATION) |
| ANSI/AWWA C300 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
| ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| NEMA SG 6:2000 | POWER SWITCHING EQUIPMENT |
| ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ACI 350.5 : 2012 | SPECIFICATIONS FOR ENVIRONMENTAL CONCRETE STRUCTURES |
| AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
| GGG-B-500 Revision D:2015 | BLOCK, TACKLE (WIRE ROPE) |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| NFPA 22 : 2018 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
| MS75009 Revision J:2005 | Bracket Assembly, Resistor (Power Type) |
| AWWA C302 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
| ASTM C 361 : 2019 : REDLINE | SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE |
| ASME B18.31.5 : 2011 | BENT BOLTS (INCH SERIES) |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| NFPA 22:2023 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
| ASME B18.31.5 : 2011 : R2016 | BENT BOLTS (INCH SERIES) |
| ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM E 290 : 2014 : REDLINE | Standard Test Methods for Bend Testing of Material for Ductility |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.