ASTM A 580/A580M : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Stainless Steel Wire
Hardcopy , PDF
06-09-2023
English
03-16-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.1.1 This specification covers stainless steel wire, except the free-machining types.
| Committee |
A 01
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers stainless steel wire, except the free-machining types. It includes round, square, octagon, hexagon, and shape wire in coils only for the more commonly used types of stainless steels for general corrosion resistance and high-temperature service. For bars in straightened and cut lengths, see Specifications A276 or A479/A479M.
Note 1:For free-machining stainless wire, designed especially for optimum machinability, see Specification A581/A581M.
1.2Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 951/A951M : 2022 | Standard Specification for Steel Wire for Masonry Joint Reinforcement |
| ASTM C 1861 : 2023 | Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster |
| ASTM F 1602 : 2012 : R2023 | Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated |
| ASTM F 1138 : 2021 | Standard Specification for Spray Shields for Mechanical Joints |
| ASTM F 1603 : 2017 : R2023 | Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated |
| ASTM F 2332 : 2006 : R2022 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ASTM F 1603 : 2017 | Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated |
| ASTM F 1138 : 1998 : R2014 | Standard Specification for Spray Shields for Mechanical Joints |
| ASTM C 1861 : 2020 | Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ASTM F 1602 : 2012 : R2017 | Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated |
| ASTM F 1546 : 1996 : R2018 | Standard Specification for Fire Hose Nozzles |
| ASTM A 951/A951M : 2016 : EDT 1 | Standard Specification for Steel Wire for Masonry Joint Reinforcement |
| ASTM A 555/A555M : 2020 | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM A 581/A581M : 1995 : REV B : R2014 | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
| ASTM A 370 : 2021 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 555/A555M : 2021 | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM A 581/A581M : 2022 : REV A | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
| ASTM A 555/A555M : 2022 | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM A 370 : 2020 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 479/A479M : 2020 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| ASTM A 479/A479M : 2021 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| ASTM A 370 : 2011 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 581/A581M : 2022 | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
| ASTM A 370 : 2022 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM A 581/A581M : 1995 : REV B : R2014 | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
| AS 3996:2019 | Access covers and grates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.