ASTM A 574 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Alloy Steel Socket-Head Cap Screws
Available format(s)
Hardcopy , PDF
Superseded date
11-23-2023
Superseded by
Language(s)
English
Published date
06-15-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required.
| Committee |
F 16
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the requirements for quenched and tempered alloy steel hexagon socket-head cap screws, 0.060 through 4 in. in diameter where high strength is required.
1.2The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
1.3The following hazard caveat pertains only to the test method portions, sections 5.1, 5.6, 8, and 12, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM F 1624 : 2012 : R2018 | Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique |
| ASTM F 2798 : 2009 : R2018 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
| ASTM F 1233 : 2021 | Standard Test Method for Security Glazing Materials And Systems |
| ASTM F 1510 : 2021 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| ASTM F 1476 : 2007 : R2019 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 541 : 2012 : R2020 | Standard Specification for Alloy Steel Eyebolts |
| ASTM F 1940 : 2007 : REV A : R2014 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM F 1789 : 2014 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2016 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1470 : 2012 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 2328 : 2005 : R2011 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs |
| ASTM F 1789 : 2017 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 606/F606M : 2019 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| ASTM F 1789 : 2006 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2001 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1470 : 2002 | Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1789 : 2017 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2012 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2001 : REV B | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1789 : 2005 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1470 : 2009 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1789 : 2003 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2006 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2282 : 2018 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM F 1789 : 2014 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2002 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1789 : 2009 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2006 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2004 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2282 : 2003 : R2015 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM F 1789 : 2007 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2007 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2015 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2282 : 2003 : R2009 : EDT 1 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM F 1789 : 2002 : REV B | Standard Terminology of F16 Mechanical Fasteners |
| ASTM A 751 : 2021 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM F 1789 : 2010 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2012 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2282 : 2003 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM F 1789 : 2005 : REV D | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2017 : REV A : EDT 1 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2328 : 2017 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
| ASTM F 1940 : 2001 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM F 2328 : 2004 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs |
| ASTM F 2328 : 2014 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
| ASTM F 1789 : 2010 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2010 : REV A : EDT 1 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2015 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1940 : 2007 : REV A | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM A 751 : 2020 | Standard Test Methods and Practices for Chemical Analysis of Steel Products |
| ASTM F 1789 : 2000 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1470 : 2018 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 2328 : 2005 | Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs |
| ASTM F 1789 : 2007 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2011 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1470 : 2001 | Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1789 : 2004 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2005 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1470 : 2019 | Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1789 : 2008 : REV D | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2282 : 2003 : R2009 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM E 112 : 2013 : R2021 | Standard Test Methods for Determining Average Grain Size |
| ASTM E 112 : 2013 | Standard Test Methods for Determining Average Grain Size |
| ASTM F 1789 : 2007 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1940 : 2007 : REV A : R2019 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM F 1789 : 2011 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2282 : 2015 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM F 1940 : 2007 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM F 1789 : 2005 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 606/F606M : 2021 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| ASTM F 1789 : 2002 | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1940 : 1999 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.