ASTM A 563 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Carbon and Alloy Steel Nuts
Available format(s)
Hardcopy , PDF
Superseded date
08-14-2021
Superseded by
Language(s)
English
Published date
07-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
F 16
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification2 covers chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other externally threaded parts.
Note 1:See Appendix X1 for guidance on suitable application of nut grades.
1.2The requirements for any grade of nut may, at the supplier's option, and with notice to the purchaser, be fulfilled by furnishing nuts of one of the stronger grades specified herein unless such substitution is barred in the inquiry and purchase order.
1.3Grades C3 and DH3 nuts have atmospheric corrosion resistance and weathering characteristics comparable to that of the steels covered in Specifications A242/A242M, A588/A588M, and A709/A709M. The atmospheric corrosion resistance of these steels is substantially better than that of carbon steel with or without copper addition (see 5.2). When properly exposed to the atmosphere, these steels can be used bare (uncoated) for many applications.
Note 2:A complete metric companion to Specification A563 has been developed—A563M; therefore, no metric equivalents are presented in this specification.
1.4Terms used in this specification are defined in Terminology F1789 unless otherwise defined herein.
| ASTM F 1155 : 2010 : R2019 | Standard Practice for Selection and Application of Piping System Materials |
| ASTM F 432 : 2019 | Standard Specification for Roof and Rock Bolts and Accessories |
| ASTM F 1510 : 2021 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
| ASTM B 745/B745M : 2015 | Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains |
| ASTM F 1476 : 2007 : R2019 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM A 307 : 2021 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
| ASTM B 695 : 2004 : R2016 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
| ASTM F 1073 : 2019 | Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use |
| ASTM F 1718 : 2001 : R2019 | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
| ASTM F 2329/F2329M : 2015 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM F 1554 : 2020 | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
| ASTM A 354 : 2017 : EDT 2 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
| ASTM F 2363/F2363M : 2017 | Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
| ASTM A 385/A385M : 2020 | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) |
| ASTM A 36/A36M : 2019 | Standard Specification for Carbon Structural Steel |
| ASTM A 394 : 2008 : R2015 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
| ASTM F 2437/F2437M : 2017 | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
| ASTM A 1105 : 2017 | Standard Specification for Corrugated Steel Manhole Assemblies |
| ASTM F 3125/F3125M : 2019 : EDT 2 | Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
| ASTM F 3148 : 2017 : REV A | Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions |
| ASTM A 761/A761M : 2018 | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM B 746/B746M : 2016 | Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM F 1018 : 1987 : REV A : R2017 | Standard Specification for Steel Emergency Gear Stowage Locker |
| ASTM B 864/B864M : 2019 | Standard Specification for Corrugated Aluminum Box Culverts |
| ASTM A 1113/A1113M : 2020 : EDT 1 | Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
| ASTM F 436/F436M : 2019 | Standard Specification for Hardened Steel Washers Inch and Metric Dimensions |
| ASTM A 760/A760M : 2015 : R2020 | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
| ASTM A 449 : 2014 : R2020 | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| ASTM F 2798 : 2009 : R2018 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
| ASTM A 762/A762M : 2019 | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
| ASTM A 242/A242M : 2013 : R2018 | Standard Specification for High-Strength Low-Alloy Structural Steel |
| ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
| ASTM F 1789 : 2014 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2016 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2017 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2329 : 2005 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM F 2329 : 2011 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM F 1789 : 2008 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM A 307 : 2014 : EDT 1 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
| ASTM F 1789 : 2006 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2001 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1789 : 2017 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2012 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2001 : REV B | Standard Terminology of F16 Mechanical Fasteners |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM F 1789 : 2005 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2003 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2006 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2014 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2002 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1789 : 2009 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2006 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2004 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2329 : 2005 : R2011 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM F 1789 : 2007 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2007 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV C | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2015 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM F 1789 : 2002 : REV B | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1789 : 2010 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2012 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2005 : REV D | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 2329 : 2013 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM F 1789 : 2010 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2010 : REV A : EDT 1 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2015 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2000 : REV A | Standard Terminology of F16 Mechanical Fasteners |
| ASTM F 1789 : 2007 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2011 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2004 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2005 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV D | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2007 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2008 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2011 : REV A | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1789 : 2005 : REV B | Standard Terminology for F16 Mechanical Fasteners |
| ASTM A 307 : 2021 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength |
| ASTM F 606 : 2010 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| ASTM F 1789 : 2002 | Standard Terminology of F16 Mechanical Fasteners |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.