ASTM A 217/A217M : 2014 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
Available format(s)
PDF
Superseded date
06-12-2020
Superseded by
Language(s)
English
Published date
05-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.CONTAINED IN VOL. 01.02, 2017 Describes martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for high-temperature and corrosive service.
| Committee |
A 01
|
| DevelopmentNote |
Supersedes ASTM A 157 and ASTM A 217 (04/2002)
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This specification2 covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other pressure-containing parts (Note 1) intended primarily for high-temperature and corrosive service (Note 2).
1.2One grade of martensitic stainless steel and nine grades of ferritic alloy steel are covered. Selection will depend on design and service conditions, mechanical properties, and the high-temperature and corrosion-resistant characteristics (Note 3).
Note 1—Carbon steel castings for pressure-containing parts are covered by Specification A216/A216M. Low alloy quench-and-tempered grades equivalent to Specification A217/A217M grades may be found in both Specifications A352/A352M and A487/A487M.
Note 2—The grades covered by this specification represent materials that are generally suitable for assembly with other castings or wrought steel parts by fusion welding. It is not intended to imply that these grades possess equal degrees of weldability; therefore, it is the responsibility of the purchaser to establish for himself a suitable welding technique. Since these grades possess varying degrees of suitability for high-temperature and corrosion-resistant service, it is also the responsibility of the purchaser to determine which grade shall be furnished, due consideration being given to the requirements of the applicable construction codes.
Note 3—The committee formulating this specification has included nine grades of materials that are considered to represent basic types of ferritic alloy steels suitable for valves, flanges, fittings, and other pressure-containing parts. Additional alloy steels that may better fulfill certain types of service will be considered for inclusion in this specification by the committee as the need becomes apparent.
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
| DOD-HDBK-249 Revision A:1984 | METALS AND ALLOYS RAPID ON-SITE IDENTIFICATION OF (RECOMMENDED PROCEDURE FOR CHEMICAL SPOT TESTING AND ASSOCIATED PHYSICAL TESTS TO VERIFY METAL ALLOY CLASSIFICATION) (METRIC) |
| I.S. EN ISO 10439:2002 | PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS |
| BS ISO 4991:2015 | Steel castings for pressure purposes |
| ASTM A 609/A609M : 2012 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
| 00/716563 DC : DRAFT NOV 2000 | EN 1759-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES, NPS 1/2 TO 24 |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| MIL-DTL-18030 Revision F:2018 | Valves, Control, Air-Diaphragm-Operated (Complete with Pneumatic Instrumentation) |
| MIL-DTL-16356 Revision E:2013 | GAUGES, DIRECT READING, OBLONG GLASS |
| API 621 RUSSIAN : 2010 | PIPELINE VALVES - RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
| ASTM F 1565 : 2000 : R2013 | Standard Specification for Pressure-Reducing Valves for Steam Service |
| MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| DIN EN 1759-1:2005-02 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| BS EN ISO 10439:2002 | Petroleum, chemical and gas service industries. Centrifugal compressors |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| PIP PCECV001 : 2016 | GUIDELINES FOR APPLICATION OF CONTROL VALVES |
| BS 1560-3.1:1989 | Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ENA TS 56-1 : ISSUE 2 1989 | FERRITIC STEEL VALVE CASTING |
| API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| BS 4504-3.1:1989 | Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
| API 594 RUSSIAN : 2004 | CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING |
| MSS SP 118 : 2007 | COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
| ASTM F 1508 : 1996 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| ASTM A 609/A609M : 2012 : R2018 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
| ASTM F 1508 : 1996 : R2010 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| ASME B31.3:2016 | PROCESS PIPING |
| BS 5157:1989 | Specification for steel gate (parallel slide) valves |
| ASTM F 1565 : 2000 : R2019 | Standard Specification for Pressure-Reducing Valves for Steam Service |
| ESI 56-1 : ISSUE 2 | FERRITIC STEEL VALVE CASTINGS |
| ASTM A 488/A488M : 2017-05 | PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL |
| MIL-DTL-18110 Revision G:2018 | VALVES, GATE TYPE, STEEL SIZES 2[1/2] INCHES TO 16 INCHES |
| Z245.15-17 | Steel valves |
| ASTM F 1565 : 2000 : R2006 | Standard Specification for Pressure-Reducing Valves for Steam Service |
| ASTM F 1565 : 2000 | Standard Specification for Pressure-Reducing Valves for Steam Service |
| ASTM A 351/A351M : 2016-05 | SPECIFICATION FOR CASTINGS, AUSTENITIC, FOR PRESSURE-CONTAINING PARTS |
| BS EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN ISO 13705 : 2013 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE |
| API 6H : 1998 : R2011 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
| API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| 13/30252103 DC : 0 | BS ISO 4991 - STEEL CASTINGS FOR PRESSURE PURPOSES |
| API 621 REDLINE : 2010 | RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
| 10/30214867 DC : 0 | BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| API 594 CHINESE : 2004 | CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING |
| API 682 CHINESE : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| AISC N690 : 2015 | SPECIFICATION FOR SAFETY-RELATED STEEL STRUCTURES FOR NUCLEAR FACILITIES |
| ASTM F 1508 : 1996 : R2004 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
| API STD 602 : 2015+ERR 1 : 2016 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
| ISO 13705:2012 | Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service |
| BS EN 1759-1:2004 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24 |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN ISO 13705:2012 | Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012) |
| EN ISO 10439:2002 | Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002) |
| API 621 : 2010 | RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES |
| MIL-DTL-20065 Revision E:2016 | VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| API 594 REDLINE : 2010 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| API 6H : 1998 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
| API 6H CHINESE : 1998 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| BIS IS 3038 : 2006 | MARTENSITIC STAINLESS STEEL AND ALLOY STEEL CASTINGS FOR PRESSURE CONTAINING PARTS SUITABLE FOR HIGH TEMPERATURE SERVICE - SPECIFICATION |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| ASTM F 1508 : 1996 : R2016 : EDT 1 | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
| ASTM A 297/A297M : 2017 : REDLINE | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| AWS A5.5/A5.5M : 2014 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| AWS A5.23/A5.23M : 2011 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| ASTM A 488/A488M : 2017-05 | PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL |
| AWS A5.29/A5.29M : 2010 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.