ASME B73.2 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Specification for Vertical In-Line Centrifugal Pumps for Chemical Process
Available format(s)
Hardcopy , PDF
Superseded date
06-12-2024
Superseded by
Language(s)
English
Published date
01-01-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Committee Roster
Correspondence With the B73 Committee
1 Scope
2 References
3 Alternative Design
4 Nomenclature and Definitions
5 Design and Construction Features
6 General Information
7 Documentation
Mandatory Appendices
I ASME Centrifugal Pump Data Sheet
II Mechanical Seal and Packing Configuration Codes
Nonmandatory Appendix
A Electronic Data Exchange
This Standard is a design and specification standard that covers metallic centrifugal pumps of vertical shaft single-stage design with suction and discharge nozzles in-line.
| DevelopmentNote |
Supersedes ASME B73.2M (02/2005)
|
| DocumentType |
Standard
|
| ISBN |
9780791871348
|
| Pages |
47
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| EN ISO 21049:2004 | Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004) |
| PIP RESP73V : 2015 | APPLICATION OF ASME B73.2 - 2003-R2008 - SPECIFICATION FOR VERTICAL IN-LINE CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS |
| I.S. EN ISO 10438-3:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS |
| API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| PIP REEP006 : 2013 | PUMP SELECTION GUIDELINES |
| API 681 : 1996 : R2010 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| BS EN ISO 21049:2004 | Pumps. Shaft sealing systems for centrifugal and rotary pumps |
| API 614 REDLINE : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| BS EN ISO 10438-3:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft sealing and control oil systems and auxilliaries General-purpose oil systems |
| API 681 : 1996 | LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ISO 10438-3:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems |
| PIP REEP007 : 2015 | GUIDELINES FOR MINIMUM AND MAXIMUM FLOW RATES FOR CENTRIFUGAL PUMPS |
| ISO 21049:2004 | Pumps Shaft sealing systems for centrifugal and rotary pumps |
| EN ISO 10438-3:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007) |
| ASME QME 1 : 2017 | QUALIFICATION OF ACTIVE MECHANICAL EQUIPMENT USED IN NUCLEAR FACILITIES |
| API 682 CHINESE : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| HI 1.3 : 2013 | ROTODYNAMIC CENTRIFUGAL PUMPS FOR DESIGN AND APPLICATION |
| ASTM A 995/A995M : 2013 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| HI 9.6.4 : 2016 | ROTODYNAMIC PUMPS FOR VIBRATION MEASUREMENT AND ALLOWABLE VALUES |
| ASTM B 335 : 2003 | Standard Specification for Nickel-Molybdenum Alloy Rod |
| API 682 : 2014 | PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| ASTM B 575 : 2017 : REDLINE | Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
| ASTM A 434/A434M : 2017-03 | SPECIFICATION FOR STEEL BARS, ALLOY, HOT-WROUGHT OR COLD-FINISHED, QUENCHED AND TEMPERED |
| ASTM B 473 : 2007 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 744/A744M : 2013 : REDLINE | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| HI 9.1 - 9.5 : 2015 | PUMPS - GENERAL GUIDELINES |
| ANSI B11.19 : 2010 | PERFORMANCE CRITERIA FOR SAFEGUARDING |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| ANSI/HI 9.6.2 : 2015 | ROTODYNAMIC PUMPS FOR ASSESSMENT OF APPLIED NOZZLE LOADS |
| ISO 21049:2004 | Pumps Shaft sealing systems for centrifugal and rotary pumps |
| AWS B1.11M/B1.11 : 2015 | GUIDE FOR THE VISUAL EXAMINATION OF WELDS |
| ASTM B 160 : 2005 : EDT 1 | Standard Specification for Nickel Rod and Bar |
| HI 14.6 : 2016 | ROTODYNAMIC PUMPS FOR HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| HI 1.1 - 1.2 : 2014 | ROTODYNAMIC CENTRIFUGAL PUMPS FOR NOMENCLATURE AND DEFINITIONS |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| HI 1.4 : 2014 | ROTODYNAMIC CENTRIFUGAL PUMPS FOR MANUALS DESCRIBING INSTALLATION, OPERATION, AND MAINTENANCE |
| ASTM A 494/A494M : 2017-03 | SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL ALLOY |
| HI 9.6.1 : 2017 | ROTODYNAMIC PUMPS - GUIDELINE FOR NPSH MARGIN |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.