ASME B31T:2021
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Toughness Requirements for Piping
Available format(s)
PDF
Language(s)
English
Published date
07-30-2021
Publisher
Superseded date
03-18-2025
Superseded by
US$109.25
Excluding Tax where applicable
This Standard provides requirements for evaluating the suitability of materials used in piping systems for piping that may be subject to brittle failure due to low-temperature service conditions.
| DocumentType |
Standard
|
| ISBN |
9780791874554
|
| Pages |
69
|
| ProductNote |
THIS STANDARD IS ALSO REFERES TO:-ASME SFA-5.1/SFA-5.1M,ASTM B96:2020.
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM A 352/A352M : 2018 : REV A | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
| ASTM A 53/A53M : 2020 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A 139/A139M : 2016 | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
| ASTM A 672/A672M : 2019 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
| ASTM B 584 : 2014 | Standard Specification for Copper Alloy Sand Castings for General Applications |
| ASTM A 234/A234M : 2019 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
| ASTM A 350/A350M : 2018 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
| ASTM A 47/A47M : 1999 : R2018 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| ASME PV CODE 9 : 2021 | Section IX-Welding, Brazing, and Fusing Qualifications |
| ASTM A 194/A194M : 2020 : REV A | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
| ASTM A 409/A409M : 2019 | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| ASTM A 354 : 2017 : EDT 2 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
| ASTM A210/A210M : 2019 | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
| ASTM A 675/A675M : 2014 : R2019 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
| ASTM A 335/A335M : 2019 : REV A | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
| ASTM A 376/A376M : 2019 | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
| ASTM A 299/A299M : 2017 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
| ASTM B 150/B150M : 2019 | Standard Specification for Aluminum Bronze Rod, Bar, and Shapes |
| ASTM A 815/A815M : 2020 | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
| ASTM B 283/B283M : 2020 | Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed) |
| ASTM A 307 : 2014 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength |
| ASTM B 523/B523M : 2018 | Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes |
| ASTM B 169/B169M : 2020 | Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar |
| ASTM A 790/A790M : 2020 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
| ASTM A 487/A487M : 2020 | Standard Specification for Steel Castings Suitable for Pressure Service |
| ASTM B 42 : 2020 | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| ASTM B 187/B187M : 2020 | Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes |
| ASTM A 20/A20M : 2020 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| ASTM A 587 : 1996 : R2019 | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
| ASTM A 420/A420M : 2020 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
| ASTM A 312/A312M : 2019 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| ASTM A 453/A453M : 2017 | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| ASTM A 351/A351M : 2018 : EDT 1 | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
| ASTM B 62 : 2017 | Standard Specification for Composition Bronze or Ounce Metal Castings |
| ASTM B 466/B466M : 2018 | Standard Specification for Seamless Copper-Nickel Pipe and Tube |
| ASME PV CODE 2C : 2021 | Section II, Materials, Part C, Specifications for Welding Rods, Electrodes, and Filler Metals |
| ASTM B 43 : 2020 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
| ASTM B 493/B493M : 2014 : R2019 | Standard Specification for Zirconium and Zirconium Alloy Forgings |
| ASTM B 280 : 2020 | Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
| ASTM A 285/A285M : 2017 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
| ASTM B 148 : 2018 | Standard Specification for Aluminum-Bronze Sand Castings |
| API 5L:2018 | LINE PIPE |
| ASTM A 358/A358M : 2019 | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| ASTM A 302/A302M : 2017 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM B 88 : 2020 | Standard Specification for Seamless Copper Water Tube |
| ASTM A 995/A995M : 2020 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
| ASTM B 467 : 2014 | Standard Specification for Welded Copper-Nickel Pipe |
| ASTM A 182/A182M : 2020 | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 536 : 1984 : R2019 : EDT 1 | Standard Specification for Ductile Iron Castings |
| ASTM A 414/A414M : 2014 : R2019 | Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels |
| ASTM A 524 : 2017 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
| ASTM A 106/A106M : 2019 : REV A | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
| ASTM A 216/A216M : 2018 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
| ASTM A 217/A217M : 2020 | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 320/A320M : 2018 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
| ASTM A 278/A278M : 2001 : R2020 | Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C) |
| ASTM A 370 : 2020 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM B 658/B658M : 2011 : R2020 | Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe |
| ASTM B 75/B75M : 2020 | Standard Specification for Seamless Copper Tube |
| ASTM A 179/A179M : 2019 | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
| ASTM A 283/A283M : 2018 | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
| ASTM A 203/A203M : 2017 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
| ASTM B 21/B21M : 2020 | Standard Specification for Naval Brass Rod, Bar, and Shapes |
| ASTM A 353/A353M : 2017 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel |
| ASTM B 68/B68M : 2019 | Standard Specification for Seamless Copper Tube, Bright Annealed |
| ASTM A 214/A214M : 2019 | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
| ASTM A 1011/A1011M : 2018 : REV A | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
| ASTM A 192/A192M : 2017 | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
| ASTM B 551/B551M : 2012 : R2017 | Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate |
| ASTM A 395/A395M : 1999 : R2018 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 135/A135M : 2020 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 451/A451M : 2020 | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service |
| ASTM A 268/A268M : 2020 | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| ASTM A 571/A571M : 2001 : R2019 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| ASTM A 516/A516M : 2017 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ASTM A 479/A479M : 2020 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| ASTM A 789/A789M : 2020 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
| ASTM A 381/A381M : 2018 | Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems |
| ASTM A 369/A369M : 2018 : REV A | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
| ASTM A 105/A105M : 2018 | Standard Specification for Carbon Steel Forgings for Piping Applications |
| ASTM A 387/A387M : 2017 : REV A | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
| ASTM A 553/A553M : 2017 : EDT 1 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel |
| ASTM A 537/A537M : 2020 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
| ASTM A 563 : 2015 | Standard Specification for Carbon and Alloy Steel Nuts |
| ASTM B 152/B152M : 2019 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
| ASTM A 437/A437M : 2015 | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service |
| ASTM A 181/A181M : 2014 : R2020 | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
| ASTM A 126 : 2004 : R2019 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings |
| ASTM F 3125/F3125M : 2019 : EDT 2 | Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength |
| ASTM A 645/A645M : 2010 : R2016 | Standard Specification for Pressure Vessel Plates, 5 % and 5<fraction><num>1</num> <den>2</den></fraction> % Nickel Alloy Steels, Specially Heat Treated |
| ASTM A 204/A204M : 2017 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
| ASTM A 240/A240M : 2020 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 197/A197M : 2000 : R2019 | Standard Specification for Cupola Malleable Iron |
| ASTM A 48/A48M : 2003 : R2016 | Standard Specification for Gray Iron Castings |
| ASTM B 98/B98M : 2013 : R2019 | Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes |
| ASTM A 36/A36M : 2019 | Standard Specification for Carbon Structural Steel |
| ASTM B 171/B171M : 2018 | Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers |
| ASTM A 334/A334M : 2004 : REV A : R2016 | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
| ASTM A 426/A426M : 2018 | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
| ASTM A 515/A515M : 2017 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ASTM A 671/A671M : 2020 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| ASTM A 333/A333M : 2018 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness |
| ASTM B 61 : 2015 | Standard Specification for Steam or Valve Bronze Castings |
| ASTM B 550/B550M : 2007 : R2019 | Standard Specification for Zirconium and Zirconium Alloy Bar and Wire |
| ASTM A 193/A193M : 2020 | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
| ASTM A 691/A691M : 2019 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| ASTM A 134/A134M : 2019 | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) |
| ASTM A 178/A178M : 2019 | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes |
| ASTM A 403/A403M : 2020 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.