ASME B31.1 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
POWER PIPING
Available format(s)
Hardcopy , PDF
Superseded date
08-21-2021
Superseded by
Language(s)
English
Published date
06-30-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Committee Roster
Introduction
Summary of Changes
Chapter I - Scope and Definitions
Chapter II - Design
Chapter III - Materials
Chapter IV - Dimensional Requirements
Chapter V - Fabrication, Assembly, and Erection
Chapter VI - Inspection, Examination, and Testing
Chapter VII - Operation and Maintenance
Mandatory Appendices
A - Allowable Stress Tables
B - Thermal Expansion Data
C - Moduli of Elasticity
D - Flexibility and Stress Intensification Factors
F - Referenced Standards
G - Nomenclature
H - Preparation of Technical Inquiries
J - Quality Control Requirements for Boiler External
Piping (BEP)
N - Rules for Nonmetallic Piping and Piping Lined With
Nonmetals
Nonmandatory Appendices
II - Rules for the Design of Safety Valve Installations
IV - Corrosion Control for ASME B31.1 Power Piping Systems
V - Recommended Practice for Operation, Maintenance, and
Modification of Power Piping Systems
VI - Approval of New Materials
VII - Procedures for the Design of Restrained Underground Piping
VIII - Guidelines for Determining If Low-Temperature Service
Requirements Apply
Index
Describes requirements for the design, materials, fabrication, erection, test, inspection, operation, and maintenance of piping systems.
| DocumentType |
Standard
|
| ISBN |
9780791870723
|
| Pages |
366
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASCE 7 10 : 2011 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| API 16D:2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
| UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
| ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
| UFC 3-430-02FA : Change 1 | UNIFIED FACILITIES CRITERIA - CENTRAL STEAM BOILER PLANTS |
| MIL E 17813 : F | EXPANSION JOINTS, PIPE, METALLIC BELLOWS |
| AWWA M45 : 3 | FIBERGLASS PIPE DESIGN |
| API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| AWS D10.10/D10.10M : 1999 : R2009 | RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING |
| API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
| A-A-50559 Base Document:1996 | VALVES, TEMPERATURE-REGULATING (THERMOSTATICALLY CONTROLLED) |
| ANS 57.7-1988(R1997) | DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE) |
| NFPA 86D : 1999 | INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE |
| API 579-1 : 2016 | FITNESS-FOR-SERVICE |
| IEEE C37.122.1-2014 | IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| UFC 3-310-04 : Change 1 | UNIFIED FACILITIES CRITERIA - SEISMIC DESIGN FOR BUILDINGS |
| UNI EN 13941 : 2011 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| EEMUA 223 : 2010 | PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| AWS EG4.0 : 1996 | GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDER |
| DEFSTAN 02-348/2(2008) : 2008 | GUIDE TO THE DESIGN, CORROSION ASSESSMENT AND STRESS ANALYSIS OF STEAM SYSTEMS PIPEWORK |
| API 16D CHINESE : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
| API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
| MIL V 18500 : B | VALVE, REDUCING, COMPRESSED GAS |
| ANS 57.2-1983 | LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR, |
| API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
| MSS SP 99 : 2016 | INSTRUMENT VALVES |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| AWS D10.10/D10.10M : 1999 | RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING |
| CSA B355 : 2015 | LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
| CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| NFPA 8504 : 1996 | ATMOSPHERIC FLUIDIZED-BED BOILER OPERATION |
| MIL-M-18294 Revision D:1987 | METER, FLUID QUANTITY VOLUMETRIC |
| UFC 4-826-10 : 2002 | UNIFIED FACILITIES CRITERIA - DESIGN: REFRIGERATION SYSTEMS FOR COLD STORAGE |
| MIL-DTL-17557 Revision F:2013 | Coolers, Fluid, Industrial, Naval Shipboard (Sample Water Coolers) |
| AWS B5.15 : 2010 | SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS |
| ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| MIL-DTL-18436 Revision G:2017 | Valves, Check - Bronze -and Steel-Body |
| AWS B5.4 : 2005 | SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES |
| MSS SP 97 : 2012 | INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
| API 551 : 2016 | PROCESS MEASUREMENT |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| MSS SP 104 : 2012 | WROUGHT COPPER SOLDER-JOINT PRESSURE FITTINGS |
| ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| MSS SP 69 : 2003 | PIPE HANGERS AND SUPPORTS - SELECTION AND APPLICATION |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
| MSS SP 130 : 2013 | BELLOWS SEALS FOR INSTRUMENT VALVES |
| API 16D RUSSIAN : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
| MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
| MSS SP 123 : 2013 | NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| EN 13941:2009+A1:2010 | Design and installation of preinsulated bonded pipe systems for district heating |
| MSS SP 109 : 2012 | WELD-FABRICATED COPPER SOLDER-JOINT PRESSURE FITTINGS |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
| ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
| MSS SP 95 : 2014 | SWAGE(D) NIPPLES AND BULL PLUGS |
| EEMUA 184 : 2009 | GUIDE TO THE ISOLATION OF PRESSURE RELIEVING DEVICES |
| MIL-H-82000 Revision C:1990 | HEATER, HOT OIL, 1.5, 3 AND 5 MILLION BTU/H OUTPUT, SKID MOUNTED |
| NFPA 67 : 2016 | GUIDE ON EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| ANS 40.35-1991 | VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE |
| BS ISO 18647:2017 | Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms |
| AWS D10.7M/D10.7 : 2008 | GUIDE FOR THE GAS SHIELDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE |
| API 16D : 2004 : R2013 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| CSA Z180.1 : 2013 | COMPRESSED BREATHING AIR AND SYSTEMS |
| ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
| EN ISO 10440-2:2001 | Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001) |
| NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
| NFPA 805 : 2015 | PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| DEFSTAN 02-772/1(2007) : 2007 | WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
| API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| MIL-E-17814 Revision F:1992 | EXPANSION JOINTS, PIPE, SLIP-TYPE PACKED |
| API 577 CHINESE : 2013 | WELDING PROCESSES, INSPECTION AND METALLURGY |
| API 12F CHINESE : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 8506 : 1998 | HEAT RECOVERY STEAM GENERATOR SYSTEMS |
| API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
| API 620 CHINESE : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| NFPA 804 : 2020 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 8502 : 1999 | PREVENTION OF FURNACE EXPLOSIONS/IMPLOSIONS IN MULTIPLE BURNER BOILERS |
| NFPA 803 : 1998 | FIRE PROTECTION FOR LIGHT WATER NUCLEAR POWER PLANTS |
| NFPA 86C : 1999 | INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE |
| UFC 3-430-01FA : 2003 | UNIFIED FACILITIES CRITERIA - HEATING AND COOLING DISTRIBUTION SYSTEMS |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
| MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
| MIL-DTL-17813 Revision H:2009 | Expansion Joints, Pipe, Metallic Bellows, General Specification for |
| ANS 58.2-1988 | DESIGN BASIS FOR PROTECTION OF LIGHT WATER NUCLEAR POWER PLANTS AGAINST THE EFFECTS OF POSTULATED PIPE RUPTURE |
| ASTM F 2014 : 2000 : R2019 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM F 1172 : 1988 : R2010 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
| CSA N293 : 2012 | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
| ISO 3977-3:2004 | Gas turbines — Procurement — Part 3: Design requirements |
| ASTM F 1271 : 1990 : R2001 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
| ASTM F 1271 : 1990 : R2018 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| ASTM F 1386 : 1992 : R2010 | Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
| ASTM F 1201 : 1988 : R2010 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| ASTM F 1201 : 1988 : R2004 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| ASTM F 1271 : 1990 : R2012 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
| ASTM F 1200 : 1988 : R2004 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| ASTM F 2015 : 2000 | Standard Specification for Lap Joint Flange Pipe End Applications |
| ASTM F 1172 : 1988 : R1998 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
| ASTM F 2015 : 2000 : R2006 | Standard Specification for Lap Joint Flange Pipe End Applications |
| ASTM F 1120 : 1987 : R2010 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
| ASTM F 1020 : 1986 : R2018 | Standard Specification for Line-Blind Valves for Marine Applications |
| CSA Z275.2 : 2015 | OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS |
| ASTM F 1120 : 1987 : R2004 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
| ASTM F 1139 : 1988 : R2015 | Standard Specification for Steam Traps and Drains |
| ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
| ASTM F 1298 : 1990 : R2012 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| ASTM F 1199 : 1988 : R2004 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
| BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
| CSA N289.3 : 2010 : INC : UPD 1 : 2012 | DESIGN PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANTS |
| BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
| ASTM F 2014 : 2000 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
| ASTM F 1298 : 1990 : R2018 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| ASTM F 1386 : 1992 : R2016 : EDT 1 | Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding |
| ASTM F 1007 : 1986 : R1996 : EDT 1 | Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application |
| ISO 18647:2017 | Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms |
| NEMA SM 24-1991 (R1997, R2002) | LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW |
| VDI 3842:2004-06 | Vibrations in piping systems |
| CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
| CSA N290.8 : 2015 | TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS |
| ASTM F 1298 : 1990 : R2006 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| IEEE C37.38-1989 | IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| ASTM F 1122 : 2004 | Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
| ASTM F 1122 : 2004 : R2015 : EDT 1 | Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
| ASTM F 2014 : 2000 : R2006 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| BS ISO 16111:2008 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride |
| ASTM F 1155 : 2010 | Standard Practice for Selection and Application of Piping System Materials |
| ASTM F 1298 : 1990 : R2001 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| ASME PV CODE 7 : 2017 | BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS |
| ASTM F 681 : 1982 : R1998 | Standard Practice for Use of Branch Connections |
| ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
| NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| ASTM A 1091/A1091M : 2016 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service |
| ASTM F 1298 : 1990 : R1995 : EDT 1 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| ASTM A 1091/A1091M : 2016 : EDT 1 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service |
| ASTM F 1020 : 1986 : R2006 | Standard Specification for Line-Blind Valves for Marine Applications |
| ASTM F 1201 : 1988 : R2016 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| ASTM F 1199 : 1988 : R2010 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
| ASTM F 1386 : 1992 : R1997 | Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
| CSA N293 : 2012 : INC : UPD 1 : 2017 : R201700 | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
| ASTM F 1122 : 2004 : R2010 | Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
| ASTM F 1139 : 1988 : R2004 | Standard Specification for Steam Traps and Drains |
| NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
| ASTM F 1200 : 1988 : R1998 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| NFPA 87 : 2018 | FLUID HEATERS |
| ASTM B 673 : 2005 : R2011 : EDT 1 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ASTM F 1172 : 1988 : R2015 : EDT 1 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| ASTM F 1007 : 1986 : R2002 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
| CSA N289.1 : 2008 : INC : UPD 1 : 2014: R201300 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
| CSA N393:13 (R2018) | Fire protection for facilities that process, handle, or store nuclear substances |
| ANSI/ASSE A10.15 : 1995 : R2005 | SAFETY REQUIREMENTS FOR DREDGING |
| ASTM F 1120 : 1987 : R1998 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
| ASTM F 1386 : 1992 : R2004 | Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| ASTM F 1200 : 1988 : R2010 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| ASTM F 1172 : 1988 : R2004 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
| ASTM F 1020 : 1986 : R2001 | Standard Specification for Line-Blind Valves for Marine Applications |
| ASTM F 1139 : 1988 : R1998 | Standard Specification for Steam Traps and Drains |
| ISO 24817:2017 | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
| CSA N289.1 : 2008 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
| ASTM F 1200 : 1988 : R2016 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
| NEMA SM 23-1991 (R1997, R2002) | STEAM TURBINES FOR MECHANICAL DRIVE SERVICE |
| ASTM F 1199 : 1988 : R2015 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
| ASTM F 1271 : 1990 : R1995 : EDT 1 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
| ASTM B 673 : 2005 : EDT 1 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ANSI/ASSE A10.15 : 1995 : R2011 | SAFETY REQUIREMENTS FOR DREDGING |
| ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
| UFC 3-430-11 : 2001 | UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS |
| BS EN ISO 10440-2:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free) |
| ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
| ASTM F 681 : 1982 : R2004 | Standard Practice for Use of Branch Connections |
| ASTM B 673 : 2005 : R2011 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ISO/TS 24817:2006 | Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| CSA N289.3 :2010 | DESIGN PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANTS |
| ASTM F 1120 : 1987 : R2015 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
| ASTM F 2014 : 2000 : R2013 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ASTM F 1020 : 1986 : R1996 : EDT 1 | Standard Specification for Line-Blind Valves for Marine Applications |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| ASTM F 2934 : 2012 | Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications |
| ASTM F 1007 : 1986 : R2014 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
| ASTM F 1323 : 2014 : REDLINE | Standard Specification for Shipboard Incinerators |
| ASTM F 681 : 1982 : R2008 | Standard Practice for Use of Branch Connections |
| ASTM F 1199 : 1988 : R1998 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
| ASTM F 1139 : 1988 : R2010 | Standard Specification for Steam Traps and Drains |
| ASTM F 2934 : 2012 : R2018 | Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications |
| ASTM F 2015 : 2000 : R2013 | Standard Specification for Lap Joint Flange Pipe End Applications |
| ASTM B 673 : 2005 : R2016 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| ASTM F 1201 : 1988 : R1998 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
| CSA N289.1 : 2008 : INC : UPD 1 : 2015 : R201300 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
| ASTM F 1155 : 2010 : R2015 | Standard Practice for Selection and Application of Piping System Materials |
| CSA N293 : 2012(R2018) | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
| ASTM F 1007 : 1986 : R2007 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
| BS EN 13941 : 2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| BS ISO 3977-3:2004 | Gas turbines. Procurement Design requirements |
| ASTM F 1020 : 1986 : R2011 | Standard Specification for Line-Blind Valves for Marine Applications |
| ASTM B 834 : 2017 : REDLINE | Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts |
| DD CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
| ASTM F 1271 : 1990 : R2006 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
| BS EN ISO 24817:2017 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
| ASTM B 673 : 2005 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
| API SPEC 12L : 2008 | SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| ISA 77.13.01 : 1999 | FOSSIL FUEL POWER PLANT STEAM TURBINE BYPASS SYSTEM |
| API 620 REDLINE : 2008 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| I.S. EN ISO 24817:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01) |
| ISA 77.13.01 : 1999 : R2008 | FOSSIL FUEL POWER PLANT STEAM TURBINE BYPASS SYSTEM |
| PIP PNE00002 : 2019 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| MSS SP 77 : 1995 | GUIDELINES FOR PIPE SUPPORT CONTRACTUAL RELATIONSHIPS |
| NFPA 85C : 1991 | PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES |
| ISA 67.01.01 : 2002 | TRANSDUCER AND TRANSMITTER INSTALLATION FOR NUCLEAR SAFETY APPLICATIONS |
| NFPA 56 (PS) : 2012 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| ASME PTC19.11 : 2008 | STEAM AND WATER SAMPLING, CONDITIONING, AND ANALYSIS IN THE POWER CYCLE |
| NBR 12615 : 1992 | SISTEMA DE COMBATE A INCENDIO POR ESPUMA |
| NASA SSTD 8070 0047 : 2016 | STANDARD FOR STAINLESS STEEL PIPING SYSTEMS AA, ACK1, ACK4, ACK6, B, BCK1, BCK3, BCK4, BCK6, BCK10, C, EE, G, H, JJ, K3, L1, L2, NCK1, NCK2, NCK3, NCK10, NCK11, P, R, T, AND Z |
| ISA 77.44.02 : 2001 | FOSSIL FUEL POWER PLANT STEAM TEMPERATURE CONTROL SYSTEM - ONCE-THROUGH TYPE |
| API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| ASME STP-PT-003 : 2005 | HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
| NASA MSFC STD 3535 : 2009 | STANDARD FOR PROPELLANTS AND PRESSURANTS USED FOR TEST AND TEST SUPPORT ACTIVITIES AT SSC AND MSFC |
| CSA Z245-11 : 2017 | STEEL FITTINGS |
| ANSI B88.2 : 1974 | PROCEDURE FOR BENCH CALIBRATION OF TANK LEVEL GAGING TAPES AND SOUNDING RULES |
| CSA FC 3 : 2004 | PORTABLE FUEL CELL POWER SYSTEMS |
| API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| PIP PNE00002 : 2013 | PIPING MATERIAL SPECIFICATION SELECTION, DEVELOPMENT, AND APPLICATION GUIDELINES |
| ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
| ANSI/CSA AMERICA FC 3-2004 (R2017) | PORTABLE FUEL CELL POWER SYSTEMS |
| S.R. CEN ISO TS 24817:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| ASME STP-PT-058 : 2013 | TEMPER BEAD QUALIFICATION HARDNESS ACCEPTANCE CRITERIA |
| NFPA 805 : 2020 | Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants |
| ANSI/ISA-75.10.01 : 2013 | GENERAL REQUIREMENTS FOR CLAMP OR PINCH VALVES |
| ASME PTB 11 : 2017 | GUIDE FOR ASME BPVC SECTION 1 STAMP HOLDERS |
| ICC IFC International Fire Code:2021 | International Fire Code |
| PIP PNC00004 : 2012 | PIPING STRESS ANALYSIS CRITERIA FOR ASME B31.3 - METALLIC PIPING |
| ASCE/SEI 4 16 : 2017 | SEISMIC ANALYSIS OF SAFETY - RELATED NUCLEAR STRUCTURES |
| ASME PTB 8 : 2014 | Procurement Guidelines for Metallic Materials (PTB-8 - 2014) |
| ASCE 7 98 : 2000 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| NASA SSTD 8070 0044 : 2012 | STANDARD FOR CARBON STEEL PIPING SYSTEMS |
| ASME PTC19.3 : 1974(R2004) | PERFORMANCE TEST CODE - PART 3: TEMPERATURE MEASUREMENT |
| ASME PTC19.11 : 2008 : R2013 | STEAM AND WATER SAMPLING, CONDITIONING, AND ANALYSIS IN THE POWER CYCLE |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| ANSI/MSS SP-58:2018 | PIPE HANGERS AND SUPPORTS Materials, Design, Manufacture, Selection, Application, and Installation (ANSI-approved American National Standard) |
| ASME PTC19.3 TW : 2016 | THERMOWELLS |
| ASME STP-PT-002 : 2005 | ASME SECTION 1 PED GUIDE - SUPPLEMENT TO GUIDE FOR ASME STAMP HOLDERS USE OF ASME SECTION 1 TO MEET THE EC PRESSURE EQUIPMENT DIRECTIVE (97/23/EC) |
| API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| NASA SSTD 8070 0095 : 2012 | PRESSURIZATION STANDARD IN SUPPORT OF THE RECERTIFICATION OF PRESSURE VESSELS AND PRESSURE SYSTEMS |
| ISA 77.44.01 : 2007 | FOSSIL FUEL POWER PLANT - STEAM TEMPERATURE CONTROLS |
| PFI ES 49 : 0 | GUIDELINES FOR INSTALLATION OF INTEGRALLY REINFORCED BRANCH CONNECTION OUTLET FITTINGS |
| ASME B31E : 2008 | STANDARD FOR THE SEISMIC DESIGN AND RETROFIT OF ABOVE-GROUND PIPING SYSTEMS |
| NFPA 664:2020 | Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities |
| I.S. EN 13941:2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
| ASTM B 625 : 2017 : REDLINE | Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip |
| ASTM B 247M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| ASTM B 234M : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| ASTM B 688 : 1996 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| AWWA C606 : 2015 | GROOVED AND SHOULDERED JOINTS |
| AWWA C153/A21.53 : 2011 | DUCTILE-IRON COMPACT FITTINGS |
| ASME B31J : 2017 | STRESS INTENSIFICATION FACTORS (I-FACTORS), FLEXIBILITY FACTORS (K-FACTORS), AND THEIR DETERMINATION FOR METALLIC PIPING COMPONENTS |
| ASTM A 691 : 1998 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| ASTM B 361 : 2016 : REDLINE | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
| AWWA C207 : 2013 | STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
| ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
| ASTM B 234 : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
| MSS SP 6 : 2017 | STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS |
| ASTM B 338 : 2017 : REDLINE | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
| ASME TDP 1 : 2013 | PREVENTION OF WATER DAMAGE TO STEAM TURBINES USED FOR ELECTRIC POWER GENERATION: FOSSIL-FUELED PLANTS |
| ASTM A 376/A376M : 2017 : REDLINE | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
| ASME B18.2.4.6M : 2010 | METRIC HEAVY HEX NUTS |
| ASTM B 409 : 2006 | Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip |
| ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| AWWA C500 : 2009 | METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| ASTM B 467 : 2014 : REDLINE | Standard Specification for Welded Copper-Nickel Pipe |
| NFPA 1963 : 2014 | FIRE HOSE CONNECTIONS |
| ASTM B 575 : 2017 : REDLINE | Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
| ASTM A 181/A181M : 2014 : REDLINE | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
| ASTM A 299/A299M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
| ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
| MSS SP 83 : 2014 | CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS) |
| ASTM B 473 : 2007 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ANSI/AWWA C200 : 2017 | STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER |
| ASTM A 409/A409M : 2015 : REDLINE | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| ASTM B 466/B 466M : 2014-05 | SPECIFICATION FOR SEAMLESS COPPER-NICKEL PIPE AND TUBE |
| ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| FCI 79.1 : 2009 | STANDARD FOR PROOF OF PRESSURE RATINGS FOR PRESSURE REGULATORS |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| MSS SP 80 : 2013 | BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES |
| ASTM A 358/A358M : 2015 : REDLINE | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
| AWWA C151/A21.51 : 2017 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
| ASME B31.3:2016 | PROCESS PIPING |
| MSS SP 67 : 2017 | BUTTERFLY VALVES |
| ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
| AWWA C600 : 2010 | INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| AWWA C208 : 2012 | DIMENSIONS FOR FABRICATED STEEL WATER PIPE FITTINGS |
| AWWA C150/A21.50 : 2014 | THICKNESS DESIGN OF DUCTILE-IRON PIPE |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASCE 7 05 : 2006 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| PFI ES 24 : 2013 | PIPE BENDING METHODS, TOLERANCES, PROCESS AND MATERIAL REQUIREMENTS |
| ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
| ASTM B 161 : 2005 : EDT 1 | Standard Specification for Nickel Seamless Pipe and Tube |
| ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
| MSS SP 97 : 2012 | INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
| API 5L : 2012 | LINE PIPE |
| AWWA C304 : 2014 | DESIGN OF PRESTRESSED CONCRETE CYLINDER PIPE |
| ANSI/AWWA C300 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
| ASTM A 437/A437M : 2015 : REDLINE | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service |
| AWWA C504 : 2015 | RUBBER-SEATED BUTTERFLY VALVES |
| ASTM A 254 : 1997 | Standard Specification for Copper-Brazed Steel Tubing |
| AWS D10.10 : 1990 | LOCAL HEATING OF WELDS IN PIPING AND TUBING, RECOMMENDED PRACTICE FOR |
| ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
| MSS SP 42 : 2013 | CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600) |
| ASTM A 351/A351M : 2016-05 | SPECIFICATION FOR CASTINGS, AUSTENITIC, FOR PRESSURE-CONTAINING PARTS |
| ASTM A 420/A420M : 2016 : REDLINE | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| ASTM A 214/A214M : 1996 | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| MSS SP 68 : 2017 | HIGH PRESSURE BUTTERFLY VALVES WITH OFFSET DESIGN |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| MSS SP 51 : 2012 | CLASS 150LW CORROSION RESISTANT FLANGES AND CAST FLANGED FITTINGS |
| ASTM A 928/A928M : 2014 : REDLINE | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
| AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
| AWWA C302 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
| ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
| ASTM B 61 : 2015 : REDLINE | Standard Specification for Steam or Valve Bronze Castings |
| ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| AWS QC1 : 2007 | STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS |
| MSS SP 53 : 2012 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD |
| AWWA C111/A21.11 : 2017 | RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
| ASTM B 861 : 2014 : REDLINE | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
| ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| ASTM B 649 : 2017 : REDLINE | Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925,<brk/> UNS N08031, UNS N08034, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| MSS SP 94 : 2015 | QUALITY STANDARD FOR FERRITIC AND MARTENSITIC STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - ULTRASONIC EXAMINATION METHOD |
| ASTM A 965/A965M : 2014-05 | SPECIFICATION FOR STEEL FORGINGS, AUSTENITIC, FOR PRESSURE AND HIGH TEMPERATURE PARTS |
| AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
| ASTM A 453/A453M : 2017 : REDLINE | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
| MSS SP 61 : 2013 | PRESSURE TESTING OF VALVES |
| ASTM A 217/A217M : 2014 : REDLINE | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM B 828 : 2016 : REDLINE | Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
| AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
| MSS SP 95 : 2014 | SWAGE(D) NIPPLES AND BULL PLUGS |
| MSS SP 93 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD |
| ASTM B 675 : 2002 | Standard Specification for UNS N08367 Welded Pipe |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| ASTM E 125 : 1963 : R2003 | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASTM A 449 : 2014 : REDLINE | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MSS SP 106 : 2012 | CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
| ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
| ASTM B 43 : 2015 : REDLINE | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
| ASTM A 139/A139M : 2016 : REDLINE | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
| ASTM B 151/B151M : 2013 : REDLINE | Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar |
| ASTM A 530/A530M : 2012-06 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE |
| MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| ASME B16.4 : 2016 | GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250 |
| AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
| ASTM B 705 : 2017 : REDLINE | Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| MSS SP 75 : 2014 | HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS |
| ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| MSS SP 54 : 2013 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - RADIOGRAPHIC EXAMINATION METHOD |
| ASTM B 862 : 2014 : REDLINE | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
| API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
| MSS SP 9 : 2013 | SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES |
| MSS SP 88 : 2015 | DIAPHRAGM VALVES |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| PFI ES 16 : 0 | ACCESS HOLES, BOSSES AND PLUGS FOR RADIOGRAPHIC INSPECTION OF PIPE WELDS |
| ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ASTM B 62 : 2017 : REDLINE | Standard Specification for Composition Bronze or Ounce Metal Castings |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| ASME B16.14 : 2013 | FERROUS PIPE PLUGS, BUSHINGS, AND LOCKNUTS WITH PIPE THREADS |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B 381 : 2013 : REDLINE | SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS |
| MSS SP 79 : 2011 | SOCKET WELDING REDUCER INSERTS |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| ASTM A 671 : 2009 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
| ASTM A 815/A815M : 2017 | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
| ASTM B 804 : 2002 | Standard Specification for UNS N08367 and UNS N08926 Welded Pipe |
| ASME B31E : 2008 | STANDARD FOR THE SEISMIC DESIGN AND RETROFIT OF ABOVE-GROUND PIPING SYSTEMS |
| MSS SP 43 : 2013 | WROUGHT AND FABRICATED BUTT-WELDING FITTINGS FOR LOW PRESSURE, CORROSION RESISTANT APPLICATIONS |
| MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
| ASME B16.25 : 2012 | BUTTWELDING ENDS |
| ASTM A 285/A285M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
| MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
| ASME B16.48 : 2015 | LINE BLANKS |
| ASME B16.3 : 2016 | MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.