AS/NZS 60079.14:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD)
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
07-30-2024
Superseded by
Published date
09-18-2009
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Adopts IEC 60079-14, ED.4.0(2007) with national modifications to specify requirements for the design selection and erection of electrical installations in hazardous areas associated with explosive atmospheres.
| Committee |
EL-014
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9242 1
|
| Pages |
116
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
First published as AS/NZS 60079.14:2009.
| AS/NZS 1826:2008 | Electrical equipment for explosive gas atmospheres - Special protection - Type of protection ‘s’ |
| AS/NZS 60079.29.2:2008 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| AS/NZS 60079.25:2004 | Electrical apparatus for explosive gas atmospheres Intrinsically safe systems |
| AS/NZS 60079.26:2007 | Explosive atmospheres Equipment with equipment protection level (EPL) Ga |
| AS 2832.5-2008 | Cathodic protection of metals Steel in concrete structures |
| AS 1828-1984 | Electrical equipment for explosive atmospheres - Cable glands |
| AS 60034.11-2009 | Rotating electrical machines Thermal protection |
| AS 3011.1-1992 | Electrical installations - Secondary batteries installed in buildings - Vented cells Vented cells |
| AS/NZS 60079.12:2000 | Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
| AS 3011.2-1992 | Electrical installations - Secondary batteries installed in buildings Sealed cells |
| AS/NZS 60079.15:2006 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus |
| AS/NZS 60079.0:2008 | Explosive atmospheres Equipment - General requirements |
| AS/NZS 60079.2:2007 | Explosive atmospheres Equipment protection by pressurized enclosure 'p' |
| AS/NZS 1768:2007 | Lightning protection |
| AS/NZS 60079.28:2007 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
| AS 1482-1985 | Electrical equipment for explosive atmospheres - Protection by ventilation - Type of protection v (Reconfirmed 2013) |
| AS 2380.7-1987 | Electrical equipment for explosive atmospheres - Explosion-protection techniques - Intrinsic safety i |
| AS/NZS 61241.11:2006 | Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety iD |
| AS 2380.4-1994 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Pressurized rooms or pressurized enclosures (Reconfirmed 2013) |
| AS/NZS 60079.1:2007 | Explosive atmospheres Equipment protection by flameproof enclosures 'd' |
| AS 60034.5-2009 | Rotating electrical machines Degrees of protection provided by the integral design of rotating electrical machines (IP Code) - Classification |
| AS/NZS 60079.6:2007 | Explosive atmospheres Equipment protection by oil immersion 'o' |
| AS 1852.826-1983 | International electrotechnical vocabulary - Electrical installations of buildings |
| AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
| AS/NZS 61241.18:2005 | Electrical apparatus for use in the presence of combustible dust Protection by encapsulation 'mD' |
| AS 1681-2002 | Safety requirements for electrically heated Type 1 ovens in which flammable volatiles occur (Reconfirmed 2013) |
| AS/NZS 4871.2:2002 | Electrical equipment for coal mines, for use underground Distribution, control and auxiliary equipment |
| AS/NZS 60079.1.1:2002 | Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap |
| AS 2832.3-2005 | Cathodic protection of metals Fixed immersed structures |
| AS 60034.1-2009 | Rotating electrical machines Rating and performance |
| AS/NZS 4871.4:2002 | Electrical equipment for coal mines, for use underground Mains powered electrical mobile machines |
| AS/NZS 61241.2.1:2000 | Electrical apparatus for use in the presence of combustible dust Test methods - Methods for determining the minimum ignition temperature of dust |
| AS 2832.4-2006 | Cathodic protection of metals Internal surfaces (Reconfirmed 2016) |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS 1972:2006 | Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020) |
| AS 2832.1-2004 | Cathodic protection of metals Pipes and cables |
| AS/NZS 4871.6:2007 | Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment |
| AS 2380.9-1991 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Type of protection n - Non-sparking |
| AS/NZS 60079.7:2006 | Explosive atmospheres Equipment protection by increased safety 'e' |
| AS 1300-1989 | Electrical equipment for coal mines - Bolted flame-proof cable coupling devices |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 2053.2:2001 | Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016) |
| AS/NZS 3191:2008 | Electric flexible cords (Reconfirmed 2019) |
| AS/NZS 60079.20:2000 | Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus |
| AS/NZS 2229:2004 | Fuel dispensing equipment for explosive atmospheres |
| AS/NZS 2053.1:2001 | Conduits and fittings for electrical installations General requirements (Reconfirmed 2016) |
| AS 2380.2-1991 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Flameproof enclosure d |
| AS 2676.1-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells |
| AS/NZS 4114.1:2003 | Spray painting booths, designated spray painting areas and paint mixing rooms Design, construction and testing |
| AS 2380.6-1988 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Increased safety |
| AS 2676.2-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Sealed cells |
| AS/NZS 4871.1:2002 | Electrical equipment for coal mines, for use underground General requirements |
| AS/NZS 4871.3:2002 | Electrical equipment for coal mines, for use underground Substations |
| AS/NZS 61241.4:2002 | Electrical apparatus for use in the presence of combustible dust Type of protection 'pD' |
| AS/NZS 2290.1:2005 | Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas |
| AS/NZS 2053.5:2001 | Conduits and fittings for electrical installations Corrugated conduits and fittings of insulating material (Reconfirmed 2016) |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS/NZS 1020:1995 | The control of undesirable static electricity |
| AS/NZS 60079.18:2005 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection encapsulation m electrical apparatus |
| AS/NZS 3800:2005 | Electrical equipment for explosive atmospheres - Repair and overhaul |
| AS/NZS 2243.8:2006 | Safety in laboratories - Fume cupboards |
| AS 2832.2-2003 | Cathodic protection of metals Compact buried structures |
| AS/NZS 60079.5:2007 | Explosive atmospheres Equipment protection by powdered filling 'q' |
| AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
| AS/NZS 60079.27:2008 | Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
| AS 60034.17-2009 | Rotating electrical machines Cage induction motors when fed from converters - Application guide |
| AS 60034.12-2009 | Rotating electrical machines Starting performance of single-speed three-phase cage induction motors |
| AS/NZS 4761.1:2008 | Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards |
| AS/NZS 4871.5:2002 | Electrical equipment for coal mines, for use underground Battery powered electrical mobile machines |
| AS/NZS 2053.7:2002 | Conduits and fittings for electrical installations Rigid metal conduits and fittings (Reconfirmed 2016) |
| AS/NZS 2053.8:1995 | Conduits and fittings for electrical installations Flexible conduits and fittings of metal or composite material (Reconfirmed 2016) |
| AS 1929-2009 | Non-destructive testing - Glossary of terms (Reconfirmed 2019) |
| AS/NZS 60079.10:2004 | Electrical apparatus for explosive gas atmospheres Classification of hazardous areas (IEC 60079-10:2002 MOD) |
| AS/NZS 61241.1:2005 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures 'tD' |
| AS/NZS 60079.11:2006 | Explosive atmospheres Equipment protection by intrinsic safety 'i' |
| AS/NZS 60079.29.1:2008 | Explosive atmospheres Gas detectors - Performance requirements of detectors for flammable gases |
| AS/NZS 61241.10:2005 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
| AS/NZS 4114.2:2003 | Spray painting booths, designated spray painting areas and paint mixing rooms - Installation and maintenance |
| AS 4647-2011 | Diaphragm gas meters |
| AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
| AS 1940:2017 | The storage and handling of flammable and combustible liquids |
| AS/NZS 1716:2012 | Respiratory protective devices (Reconfirmed 2024) |
| AS/NZS 3010:2017 | Electrical installations - Generating sets |
| AS/NZS 4836:2011 | Safe working on or near low-voltage electrical installations and equipment |
| AS/NZS 60079.20.1:2012 | Explosive atmospheres Material characteristics for gas and vapour classification - Test methods and data |
| AS/NZS 4871.6:2013 | Electrical equipment for mines and quarries Diesel powered machinery and ancillary equipment |
| SA HB 148:2016 | LP Gas leak identification and assessment of in-service road tankers |
| AS/NZS 60079.33:2012 | Explosive atmospheres Equipment protection by special protection 's' (Reconfirmed 2024) |
| AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
| AS/NZS 4745:2012 | Code of practice for handling combustible dusts |
| AS/NZS 2290.1:2014 | Electrical equipment for coal mines - Introduction, inspection and maintenance For hazardous areas |
| HB 239:2011 | Guidance on the repair and overhaul of electrical equipment for explosive atmospheres |
| AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
| AS/NZS 5026:2012 | The storage and handling of Class 4 dangerous goods (Reconfirmed 2024) |
| AS/NZS 1680.2.4:2017 | Interior and workplace lighting Industrial tasks and processes |
| AS/NZS 60079.15:2011 | Explosive atmospheres Equipment protection by type of protection 'n' |
| AS ISO 21789:2014 | Gas turbine applications - Safety |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 4871.3:2010 | Electrical equipment for mines and quarries Substations |
| AS 1375-2013 | Industrial fuel-fired appliances |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
| AS/NZS 1596:2014 | The storage and handling of LP Gas |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.