AS/NZS 4871.3:2010
Current
The latest, up-to-date edition.
Electrical equipment for mines and quarries Substations
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-25-2010
This Standard specifies requirements for the design, construction and testing of substations intended to be relocated from time to time in association with mining and quarrying activities, and fixed substations in underground situations.
Committee |
EL-023
|
DocumentType |
Standard
|
ISBN |
978 0 7337 9587 9
|
Pages |
9
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes | |
UnderRevision |
This Standard specifies requirements for the design, construction and testing of substations intended to be relocated from time to time in association with mining and quarrying activities, and fixed substations in underground situations.
Originated as part of AS 1740-1975.
Jointly revised and redesignated in part as AS/NZS 4781.3:2002.
Second edition 2010.
Reissued incorporating Amendment No. 1 (February 2017).
AS/NZS 60079.26:2007 | Explosive atmospheres Equipment with equipment protection level (EPL) Ga |
AS/NZS 60079.30.1:2007 | Explosive atmospheres Electrical resistance trace heating - General and testing requirements |
AS/NZS 60079.5:2007 | Explosive atmospheres Equipment protection by powdered filling 'q' |
AS/NZS 60079.7:2006 | Explosive atmospheres Equipment protection by increased safety 'e' |
AS/NZS 60079.6:2007 | Explosive atmospheres Equipment protection by oil immersion 'o' |
AS/NZS 60079.12:2000 | Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
AS/NZS 60079.29.2:2008 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
AS 60076.4-2006 | Power transformers Guide to the lightning impulse and switching impulse testing - Power transformers and reactors (Reconfirmed 2016) (Reconfirmed 2024) |
AS/NZS 60112:2003 | |
AS/NZS 60079.2:2007 | Explosive atmospheres Equipment protection by pressurized enclosure 'p' |
AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
AS/NZS 60079.27:2008 | Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
AS/NZS 60079.1.1:2002 | Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap |
AS 2374.5-1982 | Power Transformers Ability To Withstand Short-Circuit |
AS 60076.11-2006 | Power transformers Dry-type transformers (Reconfirmed 2016) |
AS/NZS 60079.25:2004 | Electrical apparatus for explosive gas atmospheres Intrinsically safe systems |
AS 60076.1-2005 | Power transformers General (IEC 60076-1, Ed. 2.1 (2000) MOD) |
AS/NZS 60079.30.2:2007 | Explosive atmospheres Electrical resistance trace heating - Application guide for design, installation and maintenance (IEC 60079-30-2, Ed. 1.0 (2007) MOD) |
AS/NZS 1300:2009 | Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices (Reconfirmed 2020) |
AS/NZS 60079.28:2007 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
AS/NZS 60079.20:2000 | Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus |
AS/NZS 60079.18:2005 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection encapsulation m electrical apparatus |
AS 2374.1.2-2003 | Power transformers Minimum Energy Performance Standard (MEPS) requirements for distribution transformers (Reconfirmed 2016) |
AS/NZS 60079.11:2006 | Explosive atmospheres Equipment protection by intrinsic safety 'i' |
AS/NZS 60079.15:2006 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus |
AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
AS/NZS 60079.0:2008 | Explosive atmospheres Equipment - General requirements |
AS/NZS 60079.4:2000 | Electrical apparatus for explosive gas atmospheres Method of test for ignition temperature |
AS/NZS 4695.112:1996 | Fire hazard testing of electrotechnical products Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions |
AS/NZS 60079.1:2007 | Explosive atmospheres Equipment protection by flameproof enclosures 'd' |
AS/NZS 60079.29.1:2008 | Explosive atmospheres Gas detectors - Performance requirements of detectors for flammable gases |
AS/NZS 3800:2012 | Electrical equipment for explosive atmospheres - Repair and overhaul |
AS/NZS 4240.3:2013 | Remote control systems for mining equipment Operation and maintenance for underground coal mining |
AS/NZS 2290.1:2014 | Electrical equipment for coal mines - Introduction, inspection and maintenance For hazardous areas |
HB 239:2011 | Guidance on the repair and overhaul of electrical equipment for explosive atmospheres |
AS/NZS 3785.8:2016 | Underground mining - Shaft equipment Conveyances for inclined shafts |
AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.