AS/NZS 4331.1:1995
Current
The latest, up-to-date edition.
Metallic flanges Steel flanges (Reconfirmed 2020)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
12-05-1995
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies international requirements for circular steel flanges in nominal pressure designations, PN 10 to PN 420. Types of steel flanges, their facings, dimensions, tolerances, threading, bolt sizes, flange face surface finish, marking, testing and inspection are specified. Guidance on pressure/temperature ratings for flanges of nominated materials are given in an Annex. This Standard is identical with and has been reproduced from ISO 7005-1:1992.
| Committee |
ME-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0007 1
|
| Pages |
79
|
| ProductNote |
Reconfirmed 21/08/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 21/08/2020 |
| PublisherName |
Standards Australia
|
| Status |
Current
|
This part of ISO 7005 for a single system of flanges specifies requirements for circular steel flanges in the following PN designations: Series 1*) Series 2*)PN 10 PN 2,5PN 16 PN 6PN 20 PN 25PN 50 PN 40PN 110 PN 150 PN 260 PN 420 It specifies the types of steel flanges and their facings, dimensions, tolerances, threading, bolt sizes, flange face surface finish, marking, testing and inspection. It does not specify pressure/temperature ratings or materials for steel flanges. However, annex D gives guidance on selected materials and annex E gives guidance on the ressure/temperature ratings for some flanges made from the materials listed in annex D. This part of ISO 7005 does not apply to flanges made from bar stock by turning. Nor does it apply to flanges of types 11, 12, 13, 14 and15 made from plate material. The various gasket types, dimensions, design characteristics and materials used are not within the scope of this part of ISO 7005.NOTE - Dimensions of gaskets are given in ISO 7483.
| Standards | Relationship |
| ISO 7005-1:1992 | Identical |
First published as AS/NZS 4331.1:1995.
| AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
| AS 1721-1985 | General purpose metric screw threads (Reconfirmed 2017) |
| AS ISO 16003-2010 | Components for fire extinguishing systems using gas - Requirements and test methods - Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves (Reconfirmed 2023) |
| AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
| AS 4087-2004 | Metallic flanges for waterworks purposes |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 3518:2013 | Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications (Reconfirmed 2024) |
| AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
| AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
| AS 5830.1-2012 | In-line ball valves for use in plumbing water supply systems Metal-bodied |
| AS/NZS 1677.2:1998 | Refrigerating systems Safety requirements for fixed applications |
| AS/NZS 3500.4.2:1997 | National Plumbing and Drainage Hot water supply systems - Acceptable solutions |
| AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
| AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
| AS 5082.2-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017) |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| AS 4087-1996 | Metallic flanges for waterworks purposes |
| AS/NZS 3518:2004 | Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications |
| AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 1210-1997 | Pressure vessels |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
| AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
| AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
| AS ISO 9624-2008 | Polyethylene (PE) pipes for fluids under pressure -Mating dimensions of flange adapters and loose backing flanges (ISO 9624:1997, MOD) |
| AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS 4794-2001 | Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015) |
| AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.