AS/NZS 3788:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Pressure equipment - In-service inspection
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-21-2024
English
01-01-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Provides requirements for the inspection, repair and alteration of in-service boilers, pressure vessels, piping, safety equipment and associated controls. It also provides guidance in the execution of such inspections. These inspections include the initial inspection after installation and prior to commissioning. Information is also given to facilitate grounds for agreement between appropriate regulatory authorities, owners and inspectors in establishing uniform minimum requirements for in-service inspections.
| Committee |
ME-001
|
| DocumentType |
Standard
|
| ISBN |
0 7337 4051 0
|
| Pages |
157
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies the requirements for the inspection, repair and alteration of in-service boilers, pressure vessels, piping, safety equipment and associated controls (hereinafter referred to as pressure equipment), and gives guidance in the execution of such inspection. It includes the initial inspection after installation and prior to commissioning. The inspection flow diagram (see Figure 1.1) illustrates the various types of inspection covered by this Standard.This Standard provides information for owners, and inspectors to facilitate grounds for agreement, and the establishment of uniform minimum requirements for in-service inspections, including inspection frequencies and procedures, to assist in assuring safe and economic operation. Information is provided for the assessment of defects and deterioration of pressure equipment.NOTES: 1 No rules can be written in sufficient detail to cover all aspects of the inspection of in-service pressure equipment. Each owner is responsible for ensuring that the extent and frequency of inspection is appropriate and adequate for the continued safe and economic operation of the pressure equipment. This may require the seeking of expert outside advice.2 Duty of Care is now prescribed on employers and employees regardless of regulation or standards. This Standard does not supersede such Duty of Care.This Standard may be used by inspection bodies and owners to set minimum standards of in-service inspection.
First published as AS 3788-1990.
Revised and redesignated AS/NZS 3788:1996.
Third edition 2001.
| AS 1210 SUPP 1-1990 | |
| AS 2809.4-2001 | Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes |
| AS/NZS 2430.3.7:1997 | Classification of hazardous areas - Examples of area classification - Landfill gas, sewage treatment and sewage pumping plants |
| AS ISO 1000-1998 | The international system of units (SI) and its application |
| AS/NZS 61241.3:1999 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
| AS 3892-2001 | Pressure equipment - Installation (Reconfirmed 2016) |
| AS 2593-2001 | Boilers - Unattended and limited attendance |
| AS/NZS 2430.3.9:1997 | Classification of hazardous areas Examples of area classification - Miscellaneous |
| AS/NZS 3711.6:1993 | Freight containers Tank containers |
| AS/NZS 2430.3.4:1997 | Classification of hazardous areas Examples of area classification - Flammable gases |
| AS 2452.1-1982 | Non-destructive testing - Determination of thickness - Determination of the wall thickness of pipe by the use of radiography |
| AS 2809.3-1999 | Road tank vehicles for dangerous goods - Tankers for compressed liquefiable gases |
| AS 1548-1995 | Steel plates for pressure equipment |
| AS 4041-1998 | Pressure piping |
| AS 3653-1993 | Boilers - Safety, management, combustion and other ancillary equipment |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| AS 1358-1989 | Bursting discs and bursting disc devices - Guide to application, selection, and installation |
| AS/NZS 4360:1999 | Risk management |
| AS/NZS 2430.3.3:1997 | Classification of hazardous areas Examples of area classification - Flammable liquids |
| AS 2030.4-1985 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated |
| AS/NZS 4481:1997 | Pressure equipment - Competencies of inspectors (Reconfirmed 2016) |
| AS 2865-1995 | Safe working in a confined space |
| RUL PE 1 | Rulings to the pressure equipment Standards |
| AS/NZS 3992:1998 | Pressure equipment - Welding and brazing qualification |
| AS 2885.1-1997 | Pipelines - Gas and liquid petroleum Design and construction |
| AS 2809.6-2001 | Road tank vehicles for dangerous goods Tankers for cryogenic liquids |
| AS 2452.3-1985 | Non-destructive testing - Determination of thickness - Use of ultrasonic testing |
| AS/NZS 2430.3.6:1997 | Classification of hazardous areas - Examples of area classification - Laboratories including fume cupboards and flammable medical agents |
| AS 1940-1993 | The storage and handling of flammable and combustible liquids |
| AS 1171-1998 | Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022) |
| AS 1228-1997 | Pressure equipment - Boilers |
| AS 2832.2-1991 | Cathodic protection of metals Compact buried structures |
| AS 2430.1-1987 | Classification of hazardous areas - Explosive gas atmospheres |
| AS 1210 SUPP 2-1999 | Pressure vessels - Cold-stretched austenitic stainless steel vessels (Supplement to AS 1210-1997) |
| AS/NZS 3931:1998 | Risk analysis of technological systems - Application guide |
| AS 2885.3-2001 | Pipelines - Gas and liquid petroleum - Operation and maintenance |
| AS 4458-1997 | Pressure equipment - Manufacture (Reconfirmed 2016) |
| AS 2809.2-1999 | Road tank vehicles for dangerous goods - Tankers for flammable liquids |
| AS 4343-1999 | Pressure equipment - Hazard levels |
| AS 2809.1-1999 | Road tank vehicles for dangerous goods - General requirements |
| AS/NZS 1200:2000 | Pressure equipment |
| AS 2809.5-1990 | Road tank vehicles for dangerous goods - Tankers for bitumen-based products |
| AS/NZS 2430.3.2:1997 | Classification of hazardous areas Examples of area classification - Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangers |
| AS 2062-1997 | Non-destructive testing - Penetrant testing of products and components |
| AS 3873-2001 | Pressure equipment - Operation and maintenance |
| AS 2380.7-1987 | Electrical equipment for explosive atmospheres - Explosion-protection techniques - Intrinsic safety i |
| AS 1271-1997 | Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels |
| AS 2971-1987 | Serially produced pressure vessels |
| AS 3920.1-1993 | Assurance of product quality Pressure equipment manufacture |
| AS/NZS 2430.3.8:1997 | Classification of hazardous areas - Examples of area classification - Surface coatings and adhesives |
| AS 2030.2-1996 | The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene |
| AS 1710-1986 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate - Test methods and quality classification |
| AS/NZS 1677.1:1998 | Refrigerating systems Refrigerant classification |
| AS/NZS 2430.3.5:1997 | Classification of hazardous areas - Examples of area classification - Refineries and major processing plants |
| AS/NZS 1596:1997 | Storage and handling of LP Gas |
| AS/NZS 1020:1995 | The control of undesirable static electricity |
| AS 2885.2-1995 | Pipelines - Gas and liquid petroleum Welding |
| AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
| AS 2030.1-1999 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene |
| AS/NZS 2430.3.1:1997 | Classification of hazardous areas - Examples of area classification - General |
| AS 2337.1-1999 | Gas cylinder test stations General requirements, inspections and tests - Gas cylinders |
| AS 3978-1991 | Non-destructive testing - Visual inspection of metal products and components |
| AS/NZS 1596:2002 | The storage and handling of LP Gas |
| AS 2593-2004 | Boilers - Safety management and supervision systems (Reconfirmed 2016) |
| AS 3533.3-2003 | Amusement rides and devices In-service inspection (Reconfirmed 2013) |
| AS/NZS 2022:2003 | Anhydrous ammonia - Storage and handling (Reconfirmed 2023) |
| AS 4343-2005 | Pressure equipment - Hazard levels |
| AS 1851-2005 | Maintenance of Fire Protection Systems and Equipment |
| AS/NZS 2843.2:2006 | Timber preservation plants Treatment area operation (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.