AS/NZS 3750.7:2009
Current
The latest, up-to-date edition.
Paints for steel structures Aluminium paint (Reconfirmed 2021)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
06-22-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for a single pack bright aluminium finish paint intended to protect iron and steel against corrosion.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9172 7
|
| Pages |
12
|
| ProductNote |
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for a single pack bright aluminium finish paint intended to protect iron and steel against corrosion. It may be suitable for application by brush, roller or spray. This paint will provide heat reflectance and medium-term protection from corrosion to suitably primed steelwork located in an industrial atmospheric environment.NOTES:1 Appendix A contains recommendations and advice on information that should be provided by the purchaser at the time of enquiry or order.2 Care should be taken that aluminium paint is not used in an acidic or caustic environment. Additional information on the use and application of aluminium paint is provided in Appendix B.3 Alternative methods for determining compliance with this Standard are contained in Appendix C.
Originated as AS/NZS 3750.7:1994.
Second edition 2009.
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
| AS/NZS 3750.19:2008 | Paints for steel structures Metal primer - General purpose (Reconfirmed 2020) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
| AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS/NZS ISO 9000:2006 | Quality management systems - Fundamentals and vocabulary |
| HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
| AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
| AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
| AS/NZS ISO 9000.2:1998 | Quality management and quality assurance Standards Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
| AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
| AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
| AS/NZS 1580.455.1:1997 | Paints and related materials - Methods of test Resistance to water at room temperature (Reconfirmed 2013) |
| AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS 2905-2005 | Steel drums |
| AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 2854-2004 | Tinplate cans for general use |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.