AS/NZS 3750.19:2008
Current
The latest, up-to-date edition.
Paints for steel structures Metal primer - General purpose (Reconfirmed 2020)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-19-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for single-component, general purpose priming paints as part of a system for the protection of iron and steel against atmospheric corrosion.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8664 2
|
| Pages |
10
|
| ProductNote |
Reconfirmed 11/09/2020.
This standard has been reconfirmed in Australia in 2020 and remains current in New Zealand. Reconfirmation Notice 11/09/2020 |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out requirements for single-component, general purpose priming paints as part of a system for the protection of iron and steel against atmospheric corrosion. They are intended to be applied as supplied by brush, roller or spray to provide resistance to weathering, washing and intermittent contact with petrol or mineral oils. The Standard deals with primers that are surface dry within 6 h and may be overcoated after 16 h.This Standard applies to paints intended for the priming of well-cleaned steel surfaces. These products should be overcoated with a paint system specified by AS/NZS 2312 such as ALK5 or ALK6.The primer is intended as a first coat on steel, under alkyd topcoats such as Types C17 and C20 paints, as specified in AS/NZS 2312.NOTES:1 Solvent-borne primers as described in this Standard comply with the requirements of Types C04 and C05 paint, in accordance with AS/NZS 2312.2 Appendix A provides recommendations on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of steel primers is given in Appendix B.
Originated as AS 4089-1993.
Revised and redesignated AS/NZS 3750.19:2008.
| AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS 1580.408.4-2004 | Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019) |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS 2905-2005 | Steel drums |
| AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
| AS 3730.6-2006 | Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016) |
| AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS/NZS 1580.481.1.6:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013) |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
| AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
| AS 1580.105.2-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
| AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
| AS 1580.452.2-2002 | Paints and related materials - Methods of test Resistance to corrosion - Salt droplet test |
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
| AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
| AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
| AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 2854-2004 | Tinplate cans for general use |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS/NZS 3750.23:2008 | Paints for steel structures Semi-gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.23:2008 | Paints for steel structures Semi-gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.7:2009 | Paints for steel structures Aluminium paint (Reconfirmed 2021) |
| AS/NZS 3750.22:2008 | Paints for steel structures Full gloss enamel - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 3750.20:2008 | Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free (Reconfirmed 2020) |
| AS/NZS 3750.21:2008 | Paints for steel structures Undercoat - Solvent-borne (Reconfirmed 2021) |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
| AS/NZS 2280:2012 | Ductile iron pipes and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.