AS/NZS 3750.12:1996
Current
The latest, up-to-date edition.
Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
01-05-1996
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Provides requirements for alkyd/micaceous iron oxide paint intended to protect iron and steel against atmospheric corrosion.
| Committee |
CH/3
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0174 4
|
| Pages |
15
|
| ProductNote | |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for alkyd/micaceous iron oxide (MIO) paint for the protection of iron and steel against exterior atmospheric corrosion. It is suitable for application by conventional air or airless spraying and may also be applied by roller or brush. Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference 17.This paint is intended for use as an intermediate coat or a topcoat over appropriately primed surfaces for the protection of iron and steel against corrosion. Two types are specified which have different MIO contents and which provide different degrees of protection.NOTES:1 This paint may be used as detailed for system SP4-C, SP5-C, MP3-C, MP4-A and MP7-C in AS/NZS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of alkyd/micaceous iron oxide paints is contained in Appendix B.4 Alternative methods for determining compliance with this Standard are given in Appendix C.5 The paint is available in a restricted range of colours.
Originated in Australia as AS 2673-1983.
Jointly revised and redesignated AS/NZS 3750.12:1996.
| AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
| AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
| AS/NZS 1580.214.1:1997 | Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013) |
| AS 1580.481.1.9-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering |
| AS 2105-1992 | Inorganic zinc silicate paint |
| AS/NZS 2310:1995 | Glossary of paint and painting terms |
| AS/NZS 1580.481.1.6:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013) |
| HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
| AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
| AS 1580.205.4-1981 | Paints and related materials - Methods of test Application properties - Airless spraying |
| AS 1580.404.1-1981 | Paints and related materials - Methods of test Recoating properties |
| AS 1580.205.2-1981 | Paints and related materials - Methods of test Application properties - Conventional air spraying |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS 1580.401.1-1981 | Paints and related materials - Methods of test Surface dry condition |
| AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
| AS/NZS 1580.214.5:1997 | Paints and related materials - Methods of test Consistency - Rotational viscometer (Reconfirmed 2013) |
| AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
| AS 1580.214.1-1990 | Paints and related materials - Methods of test - Consistency - Stormer viscometer |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
| AS 1580.203.1-2004 | Paints and related materials - Methods of test Skin formation |
| AS 2855-1986 | Paints and related materials - Micaceous iron oxide pigment |
| AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
| AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
| AS 2855-2004 | Paints and related materials - Micaceous iron oxide pigment (Reconfirmed 2016) |
| AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
| AS 1580.481.1.6-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS 1580.214.5-1990 | Paints and related materials - Methods of test - Consistency - Rotational viscometer |
| AS 1580.408.2-2004 | Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019) |
| AS 1580.203.1-1993 | Paints and related materials - Methods of test Skin formation |
| AS 1580.205.3-1981 | Paints and related materials - Methods of test Application properties - Roller coating |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS 1580.105.1-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning |
| AS 2905-1986 | Steel drums |
| AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.105.2-1993 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
| AS 3904.1-1987 | Quality management and quality system elements Guidelines |
| AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
| AS 3900.1-1987 | Quality management and quality assurance Standards Guidelines for selection and use |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
| AS 1580.108.1-1980 | Paints and related materials - Methods of test Determination of dry film thickness on iron and steel substrates (permanent magnet instruments) |
| AS 1580.401.5-1993 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.105.2-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| AS 2854-2004 | Tinplate cans for general use |
| AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS 1580.408.2-1993 | Paints and related materials - Methods of test Adhesion - Knife test |
| AS 1580.105.1-1992 | Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning |
| AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
| AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
| AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
| AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
| AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
| AS 1580.302.1-1993 | Paints and related materials - Methods of test Pigment content |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS 2854-1986 | Tinplate cans for general use |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS 1580.302.1-2004 | |
| AS 4025.4-1994 | Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer |
| AS 2905-2005 | Steel drums |
| AS 1580.205.1-1981 | Paints and related materials - Methods of test Application properties - Brushing |
| AS 1580.481.1.10-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS 1580.481.1.7-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking |
| AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
| AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.