AS/NZS 3500.1:2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plumbing and drainage Water Services
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-04-2024
English
06-29-2018
AS NZS 3500.1 2018 sets out requirements for the installation of water services from the point of connection to the network utility’s water supply or from an alternative drinking water supply to the points of discharge. Applies to new installations as well as alterations, additions and repairs to existing installations. KEYWORDS: Plumbing & drainage standards
Committee |
WS-014
|
DevelopmentNote |
New PDF incorporating Amendment 1.
|
DocumentType |
Standard
|
ISBN |
978-1-76072-125-1
|
Pages |
116
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for the design, installation and commissioning of cold water services from a point of connection to the points of discharge, and non-drinking water from a point of connection to the points of discharge. It applies to new installations as well as alterations, additions and repairs to existing installations.Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice.NOTES: 1 The requirements for heated water services are set out in AS/NZS 3500.4.2 See Figure 1.1 for typical installation of a property service and water service.
First published as AS 3500.1-1990.
Second edition 1992.
Jointly revised and redesignated AS/NZS 3500.1.2:1998.
Jointly revised and redesignated AS/NZS 3500.1:2003.
Third edition 2018.
Reissued incorporating Amendment No. 1 (July 2019).
AS 2700-2011 | Colour standards for general purposes (Reconfirmed 2022) |
AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
AS 2118.3-2010 | Automatic fire sprinkler systems Deluge systems |
AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
AS 1172.1:2014 | Sanitary plumbing products Water closet pans |
AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
AS/NZS 2544:1995 | Grey iron pressure fittings |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
AS/NZS 2280:2014 | Ductile iron pipes and fittings |
AS/NZS 2492:2007 | Cross-linked polyethylene (PE-X) pipes for pressure applications |
AS 4176.1-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - General (ISO 21003-1:2008, MOD) (Reconfirmed 2022) |
AS 2118.1:2017 | Automatic fire sprinkler systems General systems |
AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS 5200.053-2008 | Plumbing and drainage products Stainless steel pipes and tubes for pressure applications |
AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
AS/NZS 2537.3:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system (ISO 15875-5:2003, MOD) (Reconfirmed 2022) |
AS/NZS 2642.2:2008 | Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022) |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS 2118.6-2012 | Automatic fire sprinkler systems Combined sprinkler and hydrant systems in multistorey buildings |
AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
AS 3660.1:2014 | Termite management New building work |
AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
AS 4809:2017 | Copper pipe and fittings - Installation and commissioning |
AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
AS/NZS 3518:2013 | Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications (Reconfirmed 2024) |
AS/NZS 2648.1:1995 | Underground marking tape Non-detectable tape (Reconfirmed 2020) |
AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
AS/NZS 4331.3:1995 | Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020) |
AS 4176.3-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD) |
AS 4176.7-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD) |
AS/NZS 2878:2000 | Timber - Classification into strength groups |
AS 2118.4-2012 | Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height |
AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
AS/NZS 2537.2:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings (ISO 15875-3:2003, MOD) (Reconfirmed 2022) |
AS/NZS 2537.1:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General (ISO 15875-1:2003, MOD) (Reconfirmed 2022) |
AS 2941-2013 | Fixed fire protection installations - Pumpset systems |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS/NZS 2032:2006 | Installation of PVC pipe systems (Reconfirmed 2024) |
AS/NZS 2537.4:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the assessment of conformity (ISO/TS 15875-7:2003, MOD) |
AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
AS 4176.5-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fitness for purpose of the system (ISO 21003-5:2008, MOD) (Reconfirmed 2022) |
AS 5082.1-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications (Reconfirmed 2017) |
AS/NZS 2033:2008 | Installation of polyethylene pipe systems |
AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
AS 1604.1-2012 | Specification for preservative treatment Sawn and round timber |
AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
AS/NZS 2537.5:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Fittings for mechanical jointing (including PE-X/metal transitions) (ISO 14531-3:2006, MOD) |
AS 2441-2005 | Installation of fire hose reels (Reconfirmed 2018) |
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS 4087:2011 | Metallic flanges for waterworks purposes |
AS 2845.2-2010 | Water supply - Backflow preventions devices Registered air gaps and registered break tanks |
AS 3600-2009 | Concrete structures |
AS/NZS 4331.2:1995 | Metallic flanges Cast iron flanges (Reconfirmed 2020) |
AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
AS 4176.2-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022) |
AS 4176.8-2010 | Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD) |
AS/NZS 4765:2017 | Modified PVC (PVC-M) pipes for pressure applications |
AS 2118.2-2010 | Automatic fire sprinkler systems Drencher systems |
AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
AS 1478.1-2000 | Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
AS/NZS 4130:2009 | Polyethylene (PE) pipes for pressure applications |
AS 5082.2-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017) |
AS 5414-2012 | Bushfire water spray systems |
AS/NZS 4441:2017 | Oriented PVC (PVC-O) pipes for pressure applications (ISO 16422:2014, MOD) |
AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 2845.3-2010 | Water supply - Backflow prevention devices Field testing and maintenance of testable devices |
AS 2865-2009 | Confined spaces |
AS 2304:2019 | Water storage tanks for fire protection systems |
AS/NZS 2845.3:2020 | Water supply - Backflow prevention devices Field testing and maintenance of testable devices |
AS 1172.3:2019 | Sanitary plumbing products Personal hygiene fixtures and appliances - Bidets and bidettes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.