AS/NZS 3500.1:2003
AvailableSuperseded
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Plumbing and drainage Water services
Available format(s)
Hardcopy , Hardcopy with incorporated amendment , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
12-15-2003
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.This Standard sets out the requirements for the installation of water services from the point of connection to the Network Utility's water supply or from an alternative drinking water supply to the points of discharge. This Standard applies to new installations as well as alterations, additions and repairs to existing installations.
| Committee |
WS-014
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5475 9
|
| Pages |
119
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies the requirements for the design, installation and commissioning of cold water services from a point of connection to the points of discharge, and non-drinking water from a point of connection to the points of discharge. It applies to new installations as well as alterations, additions and repairs to existing installations. Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice. NOTE: The requirements for heated water services are set out in AS/NZS 3500.4.
Originated as AS 3500.1-1990.
Previous edition AS/NZS 3500.1:1998.
Revised and redesignated as AS/NZS 350.1:2008.
Reissued incorporating Amendment No. 1 (November 2005).
Reissued incorporating Amendment No. 2 (December 2010).
| AS 2492-1994 | Cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
| AS/NZS 2865:2001 | Safe working in a confined space |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS 2441-1988 | Installation of fire hose reels |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 4118.1.6-1995 | Fire sprinkler systems Components - Stop valves and non-return valves (Reconfirmed 2013) |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS 2441-2005 | Installation of fire hose reels (Reconfirmed 2018) |
| AS 1428.1-2001 | Design for access and mobility General requirements for access - New building work |
| AS 3600-2001 | Concrete structures |
| AS 1604.1-2000 | Specification for preservative treatment Sawn and round timber |
| AS/NZS 2544:1995 | Grey iron pressure fittings |
| AS/NZS 2492:2007 | Cross-linked polyethylene (PE-X) pipes for pressure applications |
| AS/NZS 2878:2000 | Timber - Classification into strength groups |
| AS 4087-2004 | Metallic flanges for waterworks purposes |
| AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
| AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
| AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
| AS 4118.1.7-1996 | Fire sprinkler systems Components - Alarm valves (dry) (Reconfirmed 2013) |
| AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
| AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
| AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
| AS 2941-2002 | Fixed fire protection installations - Pumpset systems |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 1604.1-2005 | Specification for preservative treatment Sawn and round timber |
| AS 2700-1996 | Colour Standards for general purposes - Swatches |
| AS 3518.2-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings |
| AS 4118.1.3-1995 | Fire sprinkler systems Components - Water motor alarms (Reconfirmed 2013) |
| AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
| AS/NZS 3718:2003 | Water supply - Tap ware |
| AS 2537-1994 | Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
| AS 1566-1997 | Copper and copper alloys - Rolled flat products (Reconfirmed 2018) |
| AS/NZS 4331.3:1995 | Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020) |
| AS/NZS 4130:2003 | Polyethylene (PE) pipes for pressure applications |
| AS 4118.1.4-1994 | Fire sprinkler systems Components - Valve monitors (Reconfirmed 2013) |
| AS 2419.1-1994 | Fire hydrant installations System design, installation and commissioning |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS/NZS 4765(INT):2000 | Modified PVC (PVC-M) pipes for pressure applications |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
| AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
| AS 4176-1994 | Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications |
| AS 4087-1996 | Metallic flanges for waterworks purposes |
| AS 4441(INT)-2003 | Oriented PVC (PVC-O) pipes for pressure applications |
| AS/NZS 2648.1:1995 | Underground marking tape Non-detectable tape (Reconfirmed 2020) |
| AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
| AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
| AS/NZS 3879:2006 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings |
| AS 4118.2.1-1995 | Fire sprinkler systems Piping - General (Reconfirmed 2013) |
| AS 2118.1-2006 | Automatic fire sprinkler systems General systems |
| AS 1379-1997 | Specification and supply of concrete |
| AS 4118.1.1-1996 | Fire sprinkler systems Components - Sprinklers and sprayers (Reconfirmed 2013) |
| AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 4118.1.5-1996 | Fire sprinkler systems Components - Deluge and pre-action valves (Reconfirmed 2013) |
| AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
| AS 4118.1.8-1999 | Fire sprinkler systems Components - Pressure-reducing valves (Reconfirmed 2013) |
| AS/NZS 2642.2:1994 | Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 2845.3-1993 | Water supply - Backflow prevention devices Field testing and maintenance |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 2118.1-1999 | Automatic fire sprinkler systems General requirements |
| AS/NZS 3879:1995 | Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings |
| AS/NZS 1477:2006 | PVC pipes and fittings for pressure applications |
| AS 4118.1.2-1996 | Fire sprinkler systems Components - Alarm valves (wet) (Reconfirmed 2013) |
| AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
| AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 4331.2:1995 | Metallic flanges Cast iron flanges (Reconfirmed 2020) |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
| AS/NZS 2280:2004 | Ductile iron pipes and fittings |
| AS 3518.1-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Pipes |
| AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 1477:1999 | PVC pipes and fittings for pressure applications |
| AS 1478.1-2000 | Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
| AS 2032-1977 | Code of practice for installation of UPVC pipe systems |
| AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS/NZS 2642.3:1994 | Polybutylene pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications |
| AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
| AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 4766(INT):2002 | Polyethylene storage tanks for water and chemicals |
| AS/NZS 4792:1999 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process |
| AS 2033-1980 | Installation of polyethylene pipe systems |
| ATS 5200.469-2005 | Technical Specification for plumbing and drainage products Waterless or limited flush urinals - With an integral sealing device |
| ATS 5200.016-2010 | Technical Specification for plumbing and drainage products Cistern inlet valves |
| AS 2118.3-2010 | Automatic fire sprinkler systems Deluge systems |
| AS 4553-2008 | Gas space heating appliances |
| AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
| AS 2610.1-2007 | Spa pools Public spas (Reconfirmed 2016) |
| AS/NZS 2982:2010 | Laboratory design and construction |
| AS/NZS 6400:2005 | Water efficient products - Rating and labelling |
| ATS 5200.004-2005 | Technical Specification for plumbing and drainage products Urinal flushing cisterns |
| ATS 5200.051-2005 | Technical Specification for plumbing and drainage products Bidet douche seats |
| ATS 5200.042-2004 | Technical Specification for plumbing and drainage products - Roll-grooved jointing systems |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
| AS 3565.1-2004 | Meters for water supply Cold water meters |
| ATS 5200.490-2007 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018) |
| AS/NZS 3690:2009 | Installation of ABS pipe systems (Reconfirmed 2024) |
| AS 2118.2-2010 | Automatic fire sprinkler systems Drencher systems |
| AS 4125.1-2009 | Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management |
| ATS 5200.050-2005 | Technical Specification for plumbing and drainage products Prefabricated bathroom modules |
| AS/NZS 3666.2:2011 | Air-handling and water systems of buildings - Microbial control Operation and maintenance |
| ATS 5200.104-2005 | Appliances (miscellaneous) |
| AS 5830.1-2012 | In-line ball valves for use in plumbing water supply systems Metal-bodied |
| ATS 5200.461-2004 | Technical Specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications |
| AS/NZS 4692.1:2005 | Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016) |
| ATS 5200.468-2005 | Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves |
| AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
| AS/NZS 2033:2008 | Installation of polyethylene pipe systems |
| AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
| ATS 5200.017-2005 | Technical Specification for plumbing and drainage products Cistern outlet valves |
| ATS 5200.464-2004 | Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems |
| ATS 5200.471-2005 | Technical specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems |
| AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
| AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
| AS 3565.1-2010 | Meters for cold and heated drinking and non-drinking water supplies Technical requirements (Reconfirmed 2021) |
| AS/NZS 4765:2007 | Modified PVC (PVC-M) pipes for pressure applications |
| AS 2050-2002 | Installation of roof tiles |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| HB 230-2008 | Rainwater Tank Design and Installation Handbook |
| ATS 5200.014-2004 | Technical Specification for plumbing and drainage products - Jointing materials |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| ATS 5200.478-2006 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications |
| ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
| AS 1172.1:2014 | Sanitary plumbing products Water closet pans |
| ATS 5200.420-2005 | Technical Specification for plumbing and drainage products Trap-priming valves |
| ATS 5200.477-2006 | Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices |
| AS 2610.2-2007 | Spa pools Private spas (Reconfirmed 2016) |
| AS 2118.4-2012 | Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height |
| ATS 5200.489-2009 | Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications |
| ATS 5200.103-2004 | Technical Specification for plumbing and drainage products - Water treatment systems (other than those specified in AS/NZS 3497) |
| AS/NZS 2712:2007 | Solar and heat pump water heaters - Design and construction (Reconfirmed 2020) |
| AS 4176.2-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022) |
| AS 2845.2-1996 | Water supply - Backflow prevention devices Air gaps and break tanks |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| HB 326-2008 | Urban Greywater Installation Handbook for Single Households |
| ATS 5200.101-2005 | Appliances (low hazard rating) |
| AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
| ATS 5200.030-2012 | Technical Specification for plumbing and drainage products Solenoid valves |
| AS 2845.2-2010 | Water supply - Backflow preventions devices Registered air gaps and registered break tanks |
| ATS 5200.467-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
| ATS 5200.026-2004 | Technical Specification for plumbing and drainage products Cold water storage tanks |
| ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
| HB 230-2006 | Rainwater Tank Design and Installation Handbook |
| ATS 5200.472-2006 | Technical Specification for plumbing and drainage products Heated water system recirculation device |
| ATS 5200.473-2007 | Stainless steel/nano-antibiotic PP-R pipe systems for water supply applications |
| AS 2118.6-2012 | Automatic fire sprinkler systems Combined sprinkler and hydrant systems in multistorey buildings |
| AS/NZS 2243.3:2010 | Safety in laboratories Microbiological safety and containment |
| AS/NZS 3982:1996 | Urinals |
| ATS 5200.053-2006 | Technical Specification for plumbing and drainage products Stainless steel pipes and tubes |
| SAA/SNZ HB32:1995 | Control of microbial growth in air-handling and water systems in buildings (Reconfirmed 2016) |
| AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
| AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns |
| AS 2118.4-1995 | Automatic fire sprinkler systems - Residential |
| AS 4995-2009 | Greywater treatment systems for vessels operated on inland waters |
| ATS 5200.105-2005 | |
| AS/NZS 4348:1995 | Water supply - Domestic type water treatment appliances - Performance requirements |
| ATS 5200.491-2010 | Technical Specification for plumbing and drainage products Aluminium alloy piping system with plastics lining for plumbing water service applications |
| ATS 5200.016-2005 | Technical Specification for plumbing and drainage products - Cistern inlet valves |
| AS/NZS 6400:2016 | Water efficient products - Rating and labelling |
| AS 2845.3-1993 | Water supply - Backflow prevention devices Field testing and maintenance |
| ATS 5200.475-2006 | Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device |
| ATS 5200.481-2006 | Technical Specification for plumbing and drainage products Thermal switching valves |
| AS 2118.1-2006 | Automatic fire sprinkler systems General systems |
| AS 5200.053-2008 | Plumbing and drainage products Stainless steel pipes and tubes for pressure applications |
| AS 4118.2.1-1995 | Fire sprinkler systems Piping - General (Reconfirmed 2013) |
| ATS 5200.462-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
| AS/NZS 3666.1:2011 | Air-handling and water systems of buildings - Microbial control Design, installation and commissioning |
| ATS 5200.479-2006 | Flood stop safety valve |
| ATS 5200.030-2004 | Technical Specification for plumbing and drainage products - Solenoid valves |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| ATS 5200.030-2007 | Technical Specification for plumbing and drainage products Solenoid valves |
| AS 2304-2011 | Water storage tanks for fire protection systems |
| AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| ATS 5200.485-2006 | Pressure compensating tank |
| AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
| ATS 5200.486-2008 | Technical Specification for plumbing and drainage products Sprinklers for home applications |
| ATS 5200.458-2004 | Technical Specification for plumbing and drainage products Universal transition fitting |
| AS 5414-2012 | Bushfire water spray systems |
| AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.